FreeCalypso > hg > freecalypso-tools
comparison loadtools/CHANGES @ 0:e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 11 Jun 2016 00:13:35 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| -1:000000000000 | 0:e7502631a0f9 |
|---|---|
| 1 Changes from loadtools-r2 to fc-host-tools-r3: | |
| 2 | |
| 3 * Implemented support for Mot C1xx (Compal) targets in addition to the | |
| 4 previously supported Openmoko and Pirelli. Compal phones have different | |
| 5 flash, require a different procedure for gaining code download access, and | |
| 6 have additional bricking concerns. | |
| 7 | |
| 8 * Updated loadagent includes Intel flash support and ABB commands needed for | |
| 9 Compal phones. | |
| 10 | |
| 11 * The range of IRAM addresses used by loadagent changed to allow gsm-fw | |
| 12 ramImage builds (chain-loaded with fc-xram) to load their IRAM code section | |
| 13 directly into place. | |
| 14 | |
| 15 * Loadtool's flash program-bin command now automatically performs a CRC-32 | |
| 16 verification after programming. | |
| 17 | |
| 18 * Miscellaneous minor polish. | |
| 19 | |
| 20 Changes from loadtools-r1 to loadtools-r2: | |
| 21 | |
| 22 * A flash ID check has been implemented in fc-loadtool, invoked automatically | |
| 23 before doing any erase or program operations, or explicitly at any time with | |
| 24 the flash info command. This check ensures that the type of flash chip in | |
| 25 the target GSM device is the same as what loadtool thinks it is, based on the | |
| 26 hardware parameters file. | |
| 27 | |
| 28 * fc-xram command line syntax changed slightly in order to support immediate | |
| 29 passing of the serial line to rvinterf/rvtdump. | |
| 30 | |
| 31 * Miscellaneous minor polish. |