FreeCalypso > hg > freecalypso-tools
comparison doc/Loadtool-targets @ 1003:7b4c011fa798
doc/Loadtool-targets: -h w220 => -h chimei
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 09 Dec 2023 18:27:31 +0000 |
| parents | a97d96e0fc5c |
| children | d15d337ac0a9 |
comparison
equal
deleted
inserted
replaced
| 1002:043bfc716f12 | 1003:7b4c011fa798 |
|---|---|
| 137 config since the beginning of FreeCalypso, and this special config is | 137 config since the beginning of FreeCalypso, and this special config is |
| 138 still needed because these phones have 16 MiB flash chips (either | 138 still needed because these phones have 16 MiB flash chips (either |
| 139 S71PL129J or S71PL129N) with the second flash chip select wired to | 139 S71PL129J or S71PL129N) with the second flash chip select wired to |
| 140 Calypso nCS3, a wiring arrangement original to this Pirelli DP-L10. | 140 Calypso nCS3, a wiring arrangement original to this Pirelli DP-L10. |
| 141 | 141 |
| 142 -h w220 | 142 -h chimei |
| 143 | 143 |
| 144 Motorola W220 (made by Chi-Mei, *not* a Compal target!) gets its own | 144 This target is needed for Chi-Mei phones: Motorola W220, Sony Ericsson |
| 145 special loadtools config because of its XRAM wiring: the XRAM bank sits | 145 J120 and likely others yet to be discovered. A special loadtools config |
| 146 on Calypso nCS3 instead of the usual nCS1. | 146 is needed because of XRAM wiring on these phones: the XRAM bank sits on |
| 147 Calypso nCS3 instead of the usual nCS1. |