FreeCalypso > hg > freecalypso-tools
comparison doc/Loadtools-usage @ 684:7674abe34c25
doc/Loadtools-usage: -t option documented
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 10 Mar 2020 07:24:47 +0000 |
| parents | f3af56eac3f4 |
| children | d2e4a2274497 |
comparison
equal
deleted
inserted
replaced
| 683:ecea01f65146 | 684:7674abe34c25 |
|---|---|
| 251 | 251 |
| 252 This option is specific to fc-xram. It selects the serial line baud | 252 This option is specific to fc-xram. It selects the serial line baud |
| 253 rate which should be set just before the loaded XRAM image is jumped | 253 rate which should be set just before the loaded XRAM image is jumped |
| 254 to; the default is 115200 baud. | 254 to; the default is 115200 baud. |
| 255 | 255 |
| 256 -t num | |
| 257 | |
| 258 This option is common for all utilities in the loadtools suite; it sets | |
| 259 the timeout to be applied to the wait for the Calypso boot ROM response. | |
| 260 Normally the tools wait forever for the Calypso boot ROM to respond to | |
| 261 the interrupt-boot beacons that are being sent continuously at the | |
| 262 interval set with -i; this -t option sets a timeout in ms instead. | |
| 263 This option is intended for automated (unattended) environments where | |
| 264 it is used together with some kind of target boot control, either -P or | |
| 265 external. | |
| 266 | |
| 256 fc-iram & fc-xram 2nd program invokation | 267 fc-iram & fc-xram 2nd program invokation |
| 257 ======================================== | 268 ======================================== |
| 258 | 269 |
| 259 Our fc-iram and fc-xram utilities can take two possible actions after they have | 270 Our fc-iram and fc-xram utilities can take two possible actions after they have |
| 260 loaded the specified S-record image into RAM: | 271 loaded the specified S-record image into RAM: |