FreeCalypso > hg > freecalypso-tools

comparison doc/Host-tools-overview @ 737:6d97866bad79

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
first round of documentation for DUART28C boot control addition
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 16 Sep 2020 06:10:39 +0000
parents 6ae3ad8865f4
children 9e3b1ef1f440
comparison
equal deleted inserted replaced
736:7d1df6d831e4 737:6d97866bad79
140 either the old TM3 version or the new ETM one. It works with 140 either the old TM3 version or the new ETM one. It works with
141 FreeCalypso Citrine, with TCS211-based firmwares including 141 FreeCalypso Citrine, with TCS211-based firmwares including
142 FreeCalypso Magnetite, with really old TI firmwares which 142 FreeCalypso Magnetite, with really old TI firmwares which
143 predate ETM, and with Mot C1xx original firmwares. It works 143 predate ETM, and with Mot C1xx original firmwares. It works
144 through rvinterf. 144 through rvinterf.
145
146 fc-pulse-dtr This trivial utility opens a serial port, asserts DTR for 50 ms,
147 then negates it and exits. See the DUART28-boot-control article
148 for the explanation.
149
150 fc-pulse-rts This trivial utility opens a serial port, asserts RTS for 50 ms,
151 then negates it and exits. See the DUART28-boot-control article
152 for the explanation.
145 153
146 fc-readcal This program attempts to read a bunch of RF calibration tables 154 fc-readcal This program attempts to read a bunch of RF calibration tables
147 out of a running firmware through Test Mode commands: first 155 out of a running firmware through Test Mode commands: first
148 tms 1, then rfpw 7 for each band, then rftr and ttr commands to 156 tms 1, then rfpw 7 for each band, then rftr and ttr commands to
149 read various tables. The primary intended purpose is extracting 157 read various tables. The primary intended purpose is extracting