FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/fic.init @ 564:42ba9f015d4c
loadtools/scripts/fic.{config,init} created
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 31 Jan 2020 05:51:07 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 563:3f5d7d3ebc69 | 564:42ba9f015d4c |
|---|---|
| 1 # Openmoko's GTA01/02 modem design is based on earlier Calypso phone or modem | |
| 2 # designs by FIC, going back to 2004 according to dated comments in OM's FLUID | |
| 3 # devices.txt file, and that parent design originally supported bigger flash | |
| 4 # chips than the ones used in mass-produced GTA01/02 units. The latter have | |
| 5 # Samsung K5A3240CTM or K5A3281CTM chips populated in them (4 MiB of flash, | |
| 6 # 512 KiB or 1 MiB of RAM), but the PCB footprint actually fits a 16 MiB flash | |
| 7 # chip (Spansion S71PL129J), with the second flash chip select wired to Calypso | |
| 8 # nCS4. That devices.txt file also indicates that this nCS4 wiring was used | |
| 9 # in FIC's 2004 design as well. | |
| 10 # | |
| 11 # This init script sets up Calypso MEMIF to access this maximum possibility of | |
| 12 # 16 MiB of flash (in this particular wiring) or any subset thereof; it may be | |
| 13 # needed if some early GTA01 prototype devices still had the bigger flash in | |
| 14 # them or if someone finds an earlier (pre-Openmoko) FIC phone or modem. | |
| 15 | |
| 16 w16 fffffb00 00A4 | |
| 17 w16 fffffb02 00A4 | |
| 18 w16 fffffb0a 00A4 | |
| 19 w16 fffef006 0008 |