FreeCalypso > hg > freecalypso-tools
comparison loadtools/loadtool.help @ 1012:11391cb6bdc0
patch from fixeria: doc change from SE K2x0 to K2xx
Since their discovery in late 2022, Sony Ericsson K200 and K220 phones
were collectively referred to as SE K2x0 in FreeCalypso documentation.
However, now that SE K205 has been discovered as yet another member
of the same family (same PCBA in different case), it makes more sense
to refer to the whole family as SE K2xx.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 23 Sep 2024 12:23:20 +0000 |
| parents | 162d2cf394e2 |
| children |
comparison
equal
deleted
inserted
replaced
| 1011:6d9b10633f10 | 1012:11391cb6bdc0 |
|---|---|
| 143 === flash2 | 143 === flash2 |
| 144 The primary end use of fc-loadtool is for reading and writing the NOR flash | 144 The primary end use of fc-loadtool is for reading and writing the NOR flash |
| 145 memories of the supported GSM devices. Most Calypso phones and modems have | 145 memories of the supported GSM devices. Most Calypso phones and modems have |
| 146 only one flash bank (as in chip select), and are manipulated with the flash | 146 only one flash bank (as in chip select), and are manipulated with the flash |
| 147 command. FreeCalypso development boards and some complex phones (Pirelli | 147 command. FreeCalypso development boards and some complex phones (Pirelli |
| 148 DP-L10, Sony Ericsson K2x0) have two flash banks (as in chip selects) of 8 MiB | 148 DP-L10, Sony Ericsson K2xx) have two flash banks (as in chip selects) of 8 MiB |
| 149 each; they are manipulated with flash and flash2 commands. | 149 each; they are manipulated with flash and flash2 commands. |
| 150 | 150 |
| 151 The following flash operations are available: | 151 The following flash operations are available: |
| 152 | 152 |
| 153 flash blankchk Blank-check a region of flash | 153 flash blankchk Blank-check a region of flash |