gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*
 * Commands which don't belong anywhere else
 */

#include <sys/types.h>
#include <stdio.h>
#include <string.h>
#include <strings.h>
#include <stdlib.h>
#include "pktmux.h"
#include "etm.h"
#include "tmffs1.h"

void
cmd_check_ffs1(argc, argv)
	char **argv;
{
	u_char cmdpkt[5];

	cmdpkt[1] = ETM_FFS1;
	cmdpkt[2] = FPI_TMFFS_VERSION;
	cmdpkt[3] = FPI_END;
	send_etm_cmd(cmdpkt, 3);
}