gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*******************************************************************************
 *
 * TRACESWITCH.H
 *
 * This module defines constants used by UART and USART trace drivers.
 *
 * (C) Texas Instruments 1999
 *
 ******************************************************************************/

#ifndef __TRACESWITCH_H__
#define __TRACESWITCH_H__

typedef enum {
    TR_BAUD_406250,
    TR_BAUD_115200,
    TR_BAUD_57600,
    TR_BAUD_38400,
    TR_BAUD_33900,
    TR_BAUD_28800,
    TR_BAUD_19200,
    TR_BAUD_14400,
    TR_BAUD_9600,
    TR_BAUD_4800,
    TR_BAUD_2400,
    TR_BAUD_1200,
    TR_BAUD_600,
    TR_BAUD_300,
    TR_BAUD_150,
    TR_BAUD_75
} T_tr_Baudrate;

#endif /* __TRACESWITCH_H__ */