view target-utils/libload/cmd_blankchk.c @ 923:10b4bed10192

gsm-fw/L1: fix for the DSP patch corruption bug The L1 code we got from the LoCosto fw contains a feature for DSP CPU load measurement. This feature is a LoCosto-ism, i.e., not applicable to earlier DBB chips (Calypso) with their respective earlier DSP ROMs. Most of the code dealing with that feature is conditionalized as #if (DSP >= 38), but one spot was missed, and the MCU code was writing into an API word dealing with this feature. In TCS211 this DSP API word happens to be used by the DSP code patch, hence that write was corrupting the patched DSP code.
author Mychaela Falconia <falcon@ivan.Harhan.ORG>
date Mon, 19 Oct 2015 17:13:56 +0000
parents d67bfcb9e351
children
line wrap: on
line source

/*
 * Flash blank check command
 */

#include <sys/types.h>
#include "types.h"

void
cmd_blankchk(argbulk)
	char *argbulk;
{
	char *argv[3];
	u_long start, length;
	u_long addr;
	int c;

	if (parse_args(argbulk, 2, 2, argv, 0) < 0)
		return;
	if (parse_hexarg(argv[0], 8, &start) < 0) {
		printf("ERROR: arg1 must be a valid 32-bit hex address\n");
		return;
	}
	if (parse_hexarg(argv[1], 8, &length) < 0) {
	    printf("ERROR: arg2 must be a valid 32-bit hex value (length)\n");
		return;
	}
	for (addr = start; addr < start + length; addr++) {
		c = *(volatile u8 *)addr;
		if (c != 0xFF) {
			printf("Not blank: %02X at %08X\n", c, addr);
			return;
		}
	}
	printf("OK\n");
}