# HG changeset patch
# User Mychaela Falconia <falcon@freecalypso.org>
# Date 1639201101 0
# Node ID 0a26e46b2fc244e8fd3446420f874bf6bb3c60c4
# Parent  148fab6e07e31d35140b8310219567d5c8957745
change VSP tap header to 6 pins, add CLK13M

diff -r 148fab6e07e3 -r 0a26e46b2fc2 venus/src/MCL
--- a/venus/src/MCL	Sat Dec 11 04:48:30 2021 +0000
+++ b/venus/src/MCL	Sat Dec 11 05:38:21 2021 +0000
@@ -794,13 +794,12 @@
 # VSP internal interface tap
 J404:
  hier=mob.core.bb.VSP_tap
- footprint=JUMPER5
- description=Header, 0.100", single row, 5 posts
+ description=Header, 0.100", dual row, 6 posts
  manufacturer=Molex
- manufacturer_part_number=0901200125
+ manufacturer_part_number=0901310123
  vendor=Digi-Key
- vendor_part_number=WM8075-ND
- npins=5
+ vendor_part_number=WM50035-06-ND
+ npins=6
 
 # VBAT tap for calibration measurements
 J405:
diff -r 148fab6e07e3 -r 0a26e46b2fc2 venus/src/core/baseband.v
--- a/venus/src/core/baseband.v	Sat Dec 11 04:48:30 2021 +0000
+++ b/venus/src/core/baseband.v	Sat Dec 11 05:38:21 2021 +0000
@@ -267,12 +267,16 @@
 /* there needs to be a pull-down resistor on the MCUDI/UDX net */
 resistor R216 (USP_abb2dbb_data, GND);
 
-/* VSP tap header */
-header_5pin VSP_tap (	.pin_1(VSP_clock),
+/*
+ * VSP tap header - the pinout is preliminary, PCB layout engineer
+ * should feel free to change it for best layout.
+ */
+header_6pin VSP_tap (	.pin_1(VSP_clock),
 			.pin_2(VSP_UL_data),
 			.pin_3(VSP_DL_data),
 			.pin_4(VSP_sync),
-			.pin_5(GND)
+			.pin_5(CLK13M_OUT),
+			.pin_6(GND)
 	);
 
 /* RTC domain test points */
diff -r 148fab6e07e3 -r 0a26e46b2fc2 venus/src/primitives
--- a/venus/src/primitives	Sat Dec 11 04:48:30 2021 +0000
+++ b/venus/src/primitives	Sat Dec 11 05:38:21 2021 +0000
@@ -63,7 +63,7 @@
 /* headers */
 header_2pin		numpins 2;
 header_3pin		numpins 3;
-header_5pin		numpins 5;
+header_6pin		numpins 6;
 header_10pin		numpins 10;
 header_14pin		numpins 14;