FreeCalypso > hg > freecalypso-schem2
comparison venus/src/MCL @ 28:f28249ee1ee5
Venus MCL: ready for first binding
| author | Mychaela Falconia <falcon@freecalypso.org> | 
|---|---|
| date | Sun, 21 Nov 2021 03:05:26 +0000 | 
| parents | bd28df303f7b | 
| children | 74a89c0a6466 | 
   comparison
  equal
  deleted
  inserted
  replaced
| 27:bd28df303f7b | 28:f28249ee1ee5 | 
|---|---|
| 406 footprint=0805 | 406 footprint=0805 | 
| 407 npins=2 | 407 npins=2 | 
| 408 | 408 | 
| 409 C699: | 409 C699: | 
| 410 hier=mob.core.rf.fem2rita_dcs.C699 | 410 hier=mob.core.rf.fem2rita_dcs.C699 | 
| 411 footprint=0402 | |
| 412 npins=2 | |
| 413 | |
| 414 C701: | |
| 415 hier=usb.usb.FT2232D.VCCIOA_bypass_cap | |
| 416 footprint=0402 | |
| 417 npins=2 | |
| 418 | |
| 419 C702: | |
| 420 hier=usb.usb.FT2232D.VCCIOB_bypass_cap | |
| 421 footprint=0402 | |
| 422 npins=2 | |
| 423 | |
| 424 C703: | |
| 425 hier=usb.usb.FT2232D.AVCC_cap | |
| 426 footprint=0402 | |
| 427 npins=2 | |
| 428 | |
| 429 C704: | |
| 430 hier=usb.usb.FT2232D.FTDI_3V3_cap | |
| 431 footprint=0402 | |
| 432 npins=2 | |
| 433 | |
| 434 C705: | |
| 435 hier=usb.usb.FT2232D.XTIN_cap | |
| 436 footprint=0402 | |
| 437 npins=2 | |
| 438 | |
| 439 C706: | |
| 440 hier=usb.usb.FT2232D.XTOUT_cap | |
| 441 footprint=0402 | |
| 442 npins=2 | |
| 443 | |
| 444 C707: | |
| 445 hier=usb.usb.P_5V_cap | |
| 446 footprint=0402 | |
| 447 npins=2 | |
| 448 | |
| 449 C708: | |
| 450 hier=usb.usb.P_5V_cap2 | |
| 451 footprint=0805 | |
| 452 npins=2 | |
| 453 | |
| 454 C709: | |
| 455 hier=usb.reg_3V3.input_cap | |
| 456 footprint=0603 | |
| 457 npins=2 | |
| 458 | |
| 459 C710: | |
| 460 hier=usb.reg_3V3.output_cap | |
| 461 footprint=0603 | |
| 462 npins=2 | |
| 463 | |
| 464 C711: | |
| 465 hier=usb.buf.bypass_cap | |
| 466 footprint=0402 | |
| 467 npins=2 | |
| 468 | |
| 469 C712: | |
| 470 hier=usb.bctl.od_buf_bypass_cap | |
| 411 footprint=0402 | 471 footprint=0402 | 
| 412 npins=2 | 472 npins=2 | 
| 413 | 473 | 
| 414 # LEDs and other diodes | 474 # LEDs and other diodes | 
| 415 | 475 | 
| 586 L608: | 646 L608: | 
| 587 hier=mob.core.rf.fem2rita_dcs.L608 | 647 hier=mob.core.rf.fem2rita_dcs.L608 | 
| 588 footprint=0402 | 648 footprint=0402 | 
| 589 npins=2 | 649 npins=2 | 
| 590 | 650 | 
| 651 L701: | |
| 652 hier=usb.usb.VBUS_ferrite | |
| 653 manufacturer=Murata | |
| 654 manufacturer_part_number=BLM18AG471SN1D | |
| 655 description=Ferrite bead for USB, 0603 | |
| 656 vendor=Digi-Key | |
| 657 vendor_part_number=490-1013-1-ND | |
| 658 footprint=0603 | |
| 659 npins=2 | |
| 660 | |
| 591 # Transistors | 661 # Transistors | 
| 592 | 662 | 
| 593 part EMB9: | 663 part EMB9: | 
| 594 device=EMB9 | 664 device=EMB9 | 
| 595 footprint=SOT666 | 665 footprint=SOT666 | 
| 708 # part of the voodoo "internal" VCXO circuit | 778 # part of the voodoo "internal" VCXO circuit | 
| 709 hier=mob.core.rf.Rita_vcxo.vcxo_passive.R217 | 779 hier=mob.core.rf.Rita_vcxo.vcxo_passive.R217 | 
| 710 footprint=0402 | 780 footprint=0402 | 
| 711 npins=2 | 781 npins=2 | 
| 712 | 782 | 
| 783 R222: | |
| 784 # VBACKUP pull-down resistor in place of Leonardo C222 | |
| 785 hier=mob.core.bb.abb.VBACKUP_pull_down | |
| 786 value=100k | |
| 787 footprint=0402 | |
| 788 npins=2 | |
| 789 | |
| 713 R251: | 790 R251: | 
| 714 # series resistor in the 26 MHz signal from Rita to Calypso | 791 # series resistor in the 26 MHz signal from Rita to Calypso | 
| 715 hier=mob.core.clock_rf2dbb.R251 | 792 hier=mob.core.clock_rf2dbb.R251 | 
| 716 footprint=0402 | 793 footprint=0402 | 
| 717 npins=2 | 794 npins=2 | 
| 771 | 848 | 
| 772 R361: | 849 R361: | 
| 773 # JTAG pull-up/down resistor pack | 850 # JTAG pull-up/down resistor pack | 
| 774 part=MNR04-10k | 851 part=MNR04-10k | 
| 775 slotmap=slotmap/R361 | 852 slotmap=slotmap/R361 | 
| 853 | |
| 854 R401: | |
| 855 hier=mob.uart.Host_TxD_pullup | |
| 856 footprint=0402 | |
| 857 npins=2 | |
| 858 | |
| 859 R402: | |
| 860 hier=mob.uart.Host_DTR_pullup | |
| 861 footprint=0402 | |
| 862 npins=2 | |
| 863 | |
| 864 R403: | |
| 865 hier=mob.uart.Host_TxD2_pullup | |
| 866 footprint=0402 | |
| 867 npins=2 | |
| 868 | |
| 869 R404: | |
| 870 hier=mob.uart.Host_RTS_pulldown | |
| 871 footprint=0402 | |
| 872 npins=2 | |
| 873 | |
| 874 R405: | |
| 875 hier=mob.sim.switch_pullup | |
| 876 footprint=0402 | |
| 877 npins=2 | |
| 776 | 878 | 
| 777 # attenuators in the Tx path from Rita to PA | 879 # attenuators in the Tx path from Rita to PA | 
| 778 part chip_atten: | 880 part chip_atten: | 
| 779 device=RAC101A-3dB | 881 device=RAC101A-3dB | 
| 780 manufacturer=Kamaya | 882 manufacturer=Kamaya | 
| 803 R623: | 905 R623: | 
| 804 hier=mob.core.rf.PA.R623 | 906 hier=mob.core.rf.PA.R623 | 
| 805 footprint=0402 | 907 footprint=0402 | 
| 806 npins=2 | 908 npins=2 | 
| 807 | 909 | 
| 910 R701: | |
| 911 hier=usb.usb.DM_series_R | |
| 912 footprint=0402 | |
| 913 npins=2 | |
| 914 | |
| 915 R702: | |
| 916 hier=usb.usb.DP_series_R | |
| 917 footprint=0402 | |
| 918 npins=2 | |
| 919 | |
| 920 R703: | |
| 921 hier=usb.usb.FT2232D.AVCC_filter_R | |
| 922 footprint=0402 | |
| 923 npins=2 | |
| 924 | |
| 925 R704: | |
| 926 hier=usb.usb.FT2232D.DOUT_series_R | |
| 927 footprint=0402 | |
| 928 npins=2 | |
| 929 | |
| 930 R705: | |
| 931 hier=usb.usb.FT2232D.DOUT_pullup_R | |
| 932 footprint=0402 | |
| 933 npins=2 | |
| 934 | |
| 935 R706: | |
| 936 hier=usb.usb.DP_pullup_R | |
| 937 footprint=0402 | |
| 938 npins=2 | |
| 939 | |
| 940 R707: | |
| 941 hier=usb.buf.jmp_RTS | |
| 942 footprint=0402 | |
| 943 npins=2 | |
| 944 | |
| 945 R708: | |
| 946 hier=usb.bctl.ChanB_RTS_pullup | |
| 947 footprint=0402 | |
| 948 npins=2 | |
| 949 | |
| 950 R709: | |
| 951 hier=usb.bctl.ChanB_DTR_pullup | |
| 952 footprint=0402 | |
| 953 npins=2 | |
| 954 | |
| 955 R710: | |
| 956 hier=VBUS_pulldown | |
| 957 footprint=0402 | |
| 958 npins=2 | |
| 959 | |
| 960 R711: | |
| 961 hier=VCHG_pulldown | |
| 962 footprint=0402 | |
| 963 npins=2 | |
| 964 | |
| 965 # As an original FreeCalypso initiative, we are putting Pi network topologies | |
| 966 # between the outputs of our RF3166 PA and the inputs of our Epcos quadband | |
| 967 # FEM. At PCB design time, we explicitly retain the freedom to populate a | |
| 968 # capacitor, an inductor or a 0R jumper for the series component of each Pi | |
| 969 # network, and as for each of the 4 ground legs in total, leave it unpopulated, | |
| 970 # populate a capacitor, or populate an inductor. We are going to use RLC | |
| 971 # reference designators for these generalized 0402 footprints. | |
| 972 | |
| 973 RLC670: | |
| 974 hier=mob.core.rf.pa2fem_lb.series | |
| 975 footprint=0402 | |
| 976 npins=2 | |
| 977 | |
| 978 RLC671: | |
| 979 hier=mob.core.rf.pa2fem_lb.GND_leg_in | |
| 980 footprint=0402 | |
| 981 npins=2 | |
| 982 | |
| 983 RLC672: | |
| 984 hier=mob.core.rf.pa2fem_lb.GND_leg_out | |
| 985 footprint=0402 | |
| 986 npins=2 | |
| 987 | |
| 988 RLC673: | |
| 989 hier=mob.core.rf.pa2fem_hb.series | |
| 990 footprint=0402 | |
| 991 npins=2 | |
| 992 | |
| 993 RLC674: | |
| 994 hier=mob.core.rf.pa2fem_hb.GND_leg_in | |
| 995 footprint=0402 | |
| 996 npins=2 | |
| 997 | |
| 998 RLC675: | |
| 999 hier=mob.core.rf.pa2fem_hb.GND_leg_out | |
| 1000 footprint=0402 | |
| 1001 npins=2 | |
| 1002 | |
| 808 # charging power slide switch | 1003 # charging power slide switch | 
| 809 S701: | 1004 S701: | 
| 810 hier=chg_switch | 1005 hier=chg_switch | 
| 811 manufacturer=C&K | 1006 manufacturer=C&K | 
| 812 manufacturer_part_number=L101011MS02Q | 1007 manufacturer_part_number=L101011MS02Q | 
| 845 description=Quad buffer IC, DHVQFN14 package | 1040 description=Quad buffer IC, DHVQFN14 package | 
| 846 vendor=Digi-Key | 1041 vendor=Digi-Key | 
| 847 vendor_part_number=1727-3481-1-ND | 1042 vendor_part_number=1727-3481-1-ND | 
| 848 pinout=74LVC125A.pinout | 1043 pinout=74LVC125A.pinout | 
| 849 npins=14 | 1044 npins=14 | 
| 1045 slotmap=slotmap/U401 | |
| 850 | 1046 | 
| 851 U402: | 1047 U402: | 
| 852 hier=mob.sim.inv.pkg | 1048 hier=mob.sim.inv.pkg | 
| 853 device=74LVC1G04 | 1049 device=74LVC1G04 | 
| 854 manufacturer=Nexperia | 1050 manufacturer=Nexperia | 
| 919 description=Octal buffer IC, DHVQFN20 package | 1115 description=Octal buffer IC, DHVQFN20 package | 
| 920 vendor=Digi-Key | 1116 vendor=Digi-Key | 
| 921 vendor_part_number=1727-7048-1-ND | 1117 vendor_part_number=1727-7048-1-ND | 
| 922 pinout=74LVC541A.pinout | 1118 pinout=74LVC541A.pinout | 
| 923 npins=20 | 1119 npins=20 | 
| 1120 slotmap=slotmap/U705 | |
| 924 | 1121 | 
| 925 U707: | 1122 U707: | 
| 926 device=74LVC2G07 | 1123 device=74LVC2G07 | 
| 927 manufacturer=Nexperia | 1124 manufacturer=Nexperia | 
| 928 manufacturer_part_number=74LVC2G07GM | 1125 manufacturer_part_number=74LVC2G07GM | 
| 929 description=Dual open drain buffer IC, SOT886 package | 1126 description=Dual open drain buffer IC, SOT886 package | 
| 930 vendor=Digi-Key | 1127 vendor=Digi-Key | 
| 931 vendor_part_number=1727-7008-1-ND | 1128 vendor_part_number=1727-7008-1-ND | 
| 932 pinout=74LVC2G07.pinout | 1129 pinout=74LVC2G07.pinout | 
| 933 npins=6 | 1130 npins=6 | 
| 1131 slotmap=slotmap/U707 | |
| 934 | 1132 | 
| 935 X201: | 1133 X201: | 
| 936 hier=mob.core.bb.dbb.xtal.xtal | 1134 hier=mob.core.bb.dbb.xtal.xtal | 
| 937 manufacturer=Micro Crystal Switzerland | 1135 manufacturer=Micro Crystal Switzerland | 
| 938 manufacturer_part_number=CC7V-T1A | 1136 manufacturer_part_number=CC7V-T1A | 
| 944 manufacturer=NDK | 1142 manufacturer=NDK | 
| 945 manufacturer_part_number=W-168-405 | 1143 manufacturer_part_number=W-168-405 | 
| 946 description=Crystal resonator, 26 MHz, made for GSM VCXO | 1144 description=Crystal resonator, 26 MHz, made for GSM VCXO | 
| 947 source=Jotrin | 1145 source=Jotrin | 
| 948 npins=4 | 1146 npins=4 | 
| 1147 | |
| 1148 X701: | |
| 1149 hier=usb.usb.FT2232D.xtal | |
| 1150 manufacturer=IQD | |
| 1151 manufacturer_part_number=LFXTAL026900 | |
| 1152 description=Crystal, 6.0 MHz, 16 pF, HC-49 SMT | |
| 1153 vendor=Digi-Key | |
| 1154 vendor_part_number=1923-1509-1-ND | |
| 1155 footprint=HC49_SMT | |
| 1156 npins=2 | 
