--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/fluid-mnf/efluid.c	Sat Feb 29 05:36:07 2020 +0000
@@ -0,0 +1,62 @@
+/* This file is autogenerated --- do not edit. */
+
+#include "fluid.h"
+
+char *main_strerror(int error)
+{
+    switch (error) {
+    case E_OK: return "Ok"; /* 0 */
+    case E_DRIVER_INIT: return "Driver failed to initialize"; /* -3 */
+    case E_DRIVER_WAIT: return "Driver recv_wait() failed"; /* -4 */
+    case E_UART_INIT: return "UART failed to initialize"; /* -5 */
+    case E_UART_PARAM: return "UART parameter bad or unsupported"; /* -6 */
+    case E_UART_DRV_SEND: return "UART driver transmit error"; /* -7 */
+    case E_UART_DRV_RECV: return "UART driver receive error"; /* -8 */
+    case E_RECV_TIMEOUT: return "Receive timeout (no target reply)"; /* -10 */
+    case E_RECV_ANTITIMEOUT: return "Receive anti-timeout (target replied!?)"; /* -11 */
+    case E_SEND_CHECKSUM: return "Transmit checksum error"; /* -12 */
+    case E_RECV_CHECKSUM: return "Receive checksum error"; /* -13 */
+    case E_PROTO_ERROR: return "Protocol error (bad char from target)"; /* -14 */
+    case E_INVALID: return "Invalid command parameter"; /* -15 */
+    case E_FIFO_OVERFLOW: return "RX FIFO overflow in target"; /* -16 */
+    case E_FLASH_UNKNOWN: return "Flash device unknown"; /* -20 */
+    case E_FLASH_TIMEOUT: return "Flash operation timeout"; /* -21 */
+    case E_FLASH_VERIFY: return "Flash verify error"; /* -22 */
+    case E_FLASH_COMMAND: return "Flash command sequence error"; /* -23 */
+    case E_FLASH_VPPRANGE: return "Flash Vpp range error"; /* -24 */
+    case E_FLASH_LOCKED: return "Flash block locked error"; /* -25 */
+    case E_FLASH_ERROR: return "Flash error (unknown!?)"; /* -26 */
+    case E_TARGET_TYPE: return "Target type not detected, unspecified or unknown"; /* -27 */
+    case E_TARGET_MEMORY: return "Target out of memory"; /* -28 */
+    case E_PARSER_EOF: return "Unexpected end of file"; /* -30 */
+    case E_PARSER_KEYWORD: return "Syntax error: keyword expected"; /* -31 */
+    case E_PARSER_STRING: return "Syntax error: string expected"; /* -32 */
+    case E_PARSER_NUMBER: return "Syntax error: number expected"; /* -33 */
+    case E_PARSER_END_BRACE: return "Syntax error: missing end brace"; /* -34 */
+    case E_PARSER_SYNTAX: return "Syntax error"; /* -35 */
+    case E_PARSER_MEMMAP: return "Undefined flash memmap"; /* -36 */
+    case E_PARSER_ALGORITHM: return "Undefined flash algorithm"; /* -37 */
+    case E_BOOTLOADER: return "Unsupported bootloader"; /* -40 */
+    case E_FILE_OPEN: return "File open error"; /* -50 */
+    case E_FILE_CLOSE: return "File close error"; /* -52 */
+    case E_FILE_READ: return "File read error"; /* -53 */
+    case E_FILE_WRITE: return "File write error"; /* -54 */
+    case E_FILE_FORMAT: return "File format/syntax error"; /* -55 */
+    case E_FILE_EMPTY: return "File empty or unreadable?"; /* -56 */
+    case E_FILE_BUF_SMALL: return "File buffer too small"; /* -57 */
+    case E_FILE_INPUT: return "No input file name supplied"; /* -58 */
+    case E_FILE_OUTPUT: return "No output file name supplied"; /* -59 */
+    case E_ADDR_RANGE: return "Bad address range"; /* -70 */
+    case E_ERASE_SPEC: return "Bad erase override specifier"; /* -71 */
+    case E_READ_SPEC: return "Bad memory read specifier"; /* -72 */
+    case E_WRITE_SPEC: return "Bad memory write specifier"; /* -73 */
+    case E_BADARG: return "Bad argument or out of range"; /* -80 */
+    case E_ARG_MULTI: return "Multiple ambiguous arguments supplied"; /* -81 */
+    case E_ARG_TOOMANY: return "Too many arguments supplied"; /* -82 */
+    case E_MEMORY: return "Out of memory"; /* -85 */
+    case E_BUFFER: return "Internal (static) buffer too small"; /* -86 */
+    case E_ROM_SSERVICE: return "Secure ROM service error"; /* -90 */
+    case E_INTERNAL: return "Internal program state error"; /* -99 */
+    default: return "unknown error code!";
+    }
+}