FreeCalypso > hg > freecalypso-reveng
comparison pirelli/vibrator-ctrl @ 369:66a6cb976076
pirelli/vibrator-ctrl
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 29 May 2021 07:42:17 +0000 |
| parents | |
| children | 844f884e0171 |
comparison
equal
deleted
inserted
replaced
| 368:82d5cc869bf1 | 369:66a6cb976076 |
|---|---|
| 1 Pirelli fw behaviour on incoming calls: when the vibrating alert mode is | |
| 2 selected, the vibrator runs in pulses, each pulse appears to be 1 s in total | |
| 3 period, duty cycle too difficult to determine. If the alert mode is set to | |
| 4 vibe and ring, then these vibrator cycles run in parallel with the ringer on/off | |
| 5 cycles - the vibrator cycle is faster, and the two cycles appear to be | |
| 6 independent, as in not explicitly synchronized. If the alert mode is set to | |
| 7 vibe then ring, in that case only one vibration pulse is produced, followed by | |
| 8 ringing only, with no more vibration. | |
| 9 | |
| 10 Pirelli fw behaviour on incoming SMS: when the alert mode is vibrate only, then | |
| 11 a total of 4 vibration pulses are produced. If the alert mode is set to vibe | |
| 12 and ring, then only 3 vibration pulses are produced instead of 4, and this | |
| 13 vibration cycle coincides with SMS alert ringtone playing. If the alert mode | |
| 14 is set to vibe then ring, in that case only one vibration pulse is produced, | |
| 15 followed by the SMS alert ringtone. |