# HG changeset patch # User Mychaela Falconia # Date 1611184714 0 # Node ID ac33ec9a07d958eef94b8a80ad535d225164f66c # Parent db344818b323e605026ca1567bbc77a961d02021 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey diff -r db344818b323 -r ac33ec9a07d9 DUART28-with-FCDEV3B --- a/DUART28-with-FCDEV3B Tue Oct 13 06:42:23 2020 +0000 +++ b/DUART28-with-FCDEV3B Wed Jan 20 23:18:34 2021 +0000 @@ -8,13 +8,13 @@ The main connection of two UARTs is made with a 10-wire ribbon cable. You should have received the correct cable from Falconia Partners LLC together with your FCDEV3B+DUART28 board kit - it is a rainbow-colored 10-wire ribbon cable -with two different end terminations: one end is terminated with a blue IDC -connector, the other end is terminated with a black connector into which -individual wires are inserted from the top. The blue connector goes to the -DUART28, the black connector goes to the FCDEV3B. +with two different end terminations: one end is terminated with a blue or grey +IDC connector, the other end is terminated with a black connector into which +individual wires are inserted from the top. The blue or grey connector goes to +the DUART28, the black connector goes to the FCDEV3B. -The blue connector going to the DUART28 board is keyed such that it can be -inserted in only one orientation, hence that one is expected to be always +The blue or grey connector going to the DUART28 board is keyed such that it can +be inserted in only one orientation, hence that one is expected to be always correct. The black connector goes to the middle of the three headers on FCDEV3B (J301), and in this case you are responsible for ensuring the correct orientation. If you are using the official DUART28 to FCDEV3B cable from