FreeCalypso > hg > fc-tourmaline
changeset 34:32a6a9833bd6
configure.sh: putting it all together
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 17 Oct 2020 03:26:12 +0000 |
| parents | 94ee95dad595 |
| children | 055d2cf216c8 |
| files | configure.sh |
| diffstat | 1 files changed, 464 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/configure.sh Sat Oct 17 03:26:12 2020 +0000 @@ -0,0 +1,464 @@ +#!/bin/sh + +set -e + +if [ ! -f configure.sh ] +then + echo "This script needs to be run from the top of the source tree" 1>&2 + exit 1 +fi + +if [ ! -f helpers/makeline ] +then + echo "Please run make in the helpers directory first" 1>&2 + exit 1 +fi + +# start looking at our invokation line + +if [ "$1" = --clean ] +then + clean_flag=1 + shift +else + clean_flag=0 +fi + +if [ $# -lt 2 ] +then + echo "usage: $0 [--clean] target config [vars]" 1>&2 + exit 1 +fi + +TARGET="$1" +CONFIG="$2" + +if [ ! -f "targets/$TARGET.conf" -o ! -f "targets/$TARGET.h" ] +then + echo "Error: target $TARGET not known" 1>&2 + exit 1 +fi + +if [ ! -f "configs/$CONFIG" ] +then + echo "Error: configuration $CONFIG not known" 1>&2 + exit 1 +fi + +# target defaults that can be overridden by $TARGET.conf + +CHIPSET=10 +DSP=36 +RF=12 +DISABLE_SLEEP=0 +FCHG_STATE=0 +RVTMUX_ON_MODEM=0 + +. "targets/$TARGET.conf" + +# settings derived from the target-defined DSP version + +case "$DSP" in + 33) + AMR=0 + L1_DYN_DSP_DWNLD=0 + L1_VOICE_MEMO_AMR=0 + MELODY_E2=0 + SPEECH_RECO=0 + ;; + 34) + AMR=1 + L1_DYN_DSP_DWNLD=0 + L1_VOICE_MEMO_AMR=0 + MELODY_E2=0 + SPEECH_RECO=0 + ;; + 36) + AMR=1 + L1_DYN_DSP_DWNLD=1 + L1_VOICE_MEMO_AMR=1 + MELODY_E2=1 + SPEECH_RECO=1 + ;; + *) + echo "Error: DSP=$DSP setting not understood" 1>&2 + exit 1 +esac + +# functional configuration part + +# these vars MUST be set by the functional config +GPRS= +MMI= +R2D_STATE= +SRVC= + +# dummy defaults for sans-UI configs +R2D_EMBEDDED_LCD=7 +UI_CONFIG=bigcolor + +# apply functional config + +. "configs/$CONFIG" + +# verify it + +if [ -z "$GPRS" ] +then + echo "Error: configs/$CONFIG must set GPRS=" 1>&2 + exit 1 +fi + +if [ -z "$MMI" ] +then + echo "Error: configs/$CONFIG must set MMI=" 1>&2 + exit 1 +fi + +if [ -z "$R2D_STATE" ] +then + echo "Error: configs/$CONFIG must set R2D_STATE=" 1>&2 + exit 1 +fi + +if [ -z "$SRVC" ] +then + echo "Error: configs/$CONFIG must set SRVC=" 1>&2 + exit 1 +fi + +if [ "$MMI" != 0 ] +then + FCHG_STATE=1 +fi + +# miscellaneous configurable feature settings + +ALLOW_CSIM_GSM=1 +OSL=0 +OSX=0 +SERIAL_DYNAMIC_SWITCH=0 +TI_PROFILER=0 +TRACEMASK_IN_FFS=0 +TR_BAUD_CONFIG=TR_BAUD_115200 +USE_STR2IND=0 + +SUFFIX= + +# allow the user to override these defaults + +shift +shift +while [ $# != 0 ] +do + eval "$1" + shift +done + +BUILD_DIR="build-$TARGET-$CONFIG$SUFFIX" + +echo "Building configuration $CONFIG for target $TARGET in $BUILD_DIR" + +if [ "$clean_flag" = 1 ] +then + rm -rf $BUILD_DIR +fi +mkdir -p $BUILD_DIR + +: > $BUILD_DIR/lcfgen + +# shell functions to be used in the configuration recipe + +build_lib() { + if [ $# != 1 ] + then + echo "Error: build_lib takes 1 argument" 1>&2 + exit 1 + fi + scripts/mk-component.sh "$1" + SUBDIR="$SUBDIR $1" + current_lib=$1/$1.lib + LIBS="$LIBS $current_lib" +} + +blob_lib() { + if [ $# != 1 ] + then + echo "Error: blob_lib takes 1 argument" 1>&2 + exit 1 + fi + current_lib="../blobs/$1.lib" + LIBS="$LIBS $current_lib" +} + +lib_link_magic() { + if [ $# != 1 ] + then + echo "Error: lib_link_magic takes 1 argument" 1>&2 + exit 1 + fi + if [ -z "$current_lib" ] + then + echo "Error: lib_link_magic called before build_lib or blob_lib" 1>&2 + exit 1 + fi + SPECIAL_LINK_LIBS="$SPECIAL_LINK_LIBS $current_lib" + echo "$1" >> $BUILD_DIR/lcfgen +} + +# invoke the configuration recipe + +export BUILD_DIR TARGET USE_STR2IND +export CHIPSET DSP RF +export AMR L1_DYN_DSP_DWNLD L1_VOICE_MEMO_AMR MELODY_E2 SPEECH_RECO +export DISABLE_SLEEP +export FCHG_STATE R2D_STATE +export GPRS MMI SRVC RVTMUX_ON_MODEM +export R2D_EMBEDDED_LCD UI_CONFIG +export ALLOW_CSIM_GSM SERIAL_DYNAMIC_SWITCH TR_BAUD_CONFIG +export TI_PROFILER TRACEMASK_IN_FFS +export OSL + +scripts/config-headers.sh + +SUBDIR= +LIBS= +SPECIAL_LINK_LIBS= +current_lib= + +build_lib ccddata + +# ACI libs +build_lib aci +build_lib aciext +build_lib aci_dti_mng +build_lib atiext +build_lib comlib + +if [ "$GPRS" = 1 ] +then + build_lib config_gprs_fl + build_lib config_gprs_ir +else + build_lib config_gsm_fl + build_lib config_gsm_ir +fi +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +# UI layers +if [ "$MMI" = 2 ] +then + build_lib bmi + build_lib icn + build_lib mfw +fi + +# G23M protocol stack libs +build_lib alr +build_lib cc +build_lib dl +build_lib dti +build_lib l1_pei +build_lib mm +build_lib rr +build_lib sim_b_lib +build_lib sms +build_lib ss +build_lib uart_b_lib + +# fax and data +if [ "$SRVC" != 0 ] +then + build_lib l2r + build_lib ra + build_lib rlp +fi + +# fax specific +if [ "$SRVC" = 1 ] +then + build_lib fad + build_lib t30 +fi + +# GPRS specific +if [ "$GPRS" = 1 ] +then + build_lib cci + build_lib cci_ir + lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + build_lib cl + build_lib gmm + build_lib grlc + build_lib grlc_ir + lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + build_lib grr + build_lib llc + build_lib sm + build_lib sndcp + build_lib ppp + build_lib ppp_ir + lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + build_lib upm +fi + +# Condat drivers +build_lib gdi + +# GPF +build_lib ccd +build_lib frame_fl +build_lib frame_ir +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +build_lib misc_fl +build_lib misc_ir +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +if [ "$OSX" = 1 ] +then + build_lib osx +else + blob_lib osx_na7_db +fi +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +build_lib tif_fl +build_lib tif_ir +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +# core drivers +build_lib drivers_flash + +# Layer 1 +build_lib tpudrv +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' +build_lib l1_ext +lib_link_magic '(BSS_LIBS (.l1s_global))' +build_lib l1_int +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' +build_lib l1_custom_ext +build_lib l1_custom_int +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +build_lib riviera_core_flash +build_lib riviera_cust_flash + +# services +build_lib audio +build_lib audio_bgd +build_lib cst +build_lib dar +build_lib dar_gbl_var +lib_link_magic '(BSS_DAR_LIB (.bss))' +build_lib etm +build_lib lls + +# app drivers +build_lib abb +build_lib buzzer +if [ "$FCHG_STATE" = 1 ] +then + build_lib fchg +fi +build_lib ffs +build_lib ffs_drv +build_lib ffs_pcm +build_lib kpd +build_lib power +if [ "$R2D_STATE" = 1 ] +then + build_lib r2d_drv_custom_flash + build_lib r2d_drv_flash + build_lib r2d_drv_int_ram + lib_link_magic '(CONST_LIBS (.text, .r2dlcd))' +fi +build_lib rtc_drv +build_lib sim_drv +build_lib spi_drv +build_lib uart_drv + +# system glue +build_lib main +build_lib bootloader +lib_link_magic '(CONST_BOOT_LIB (.const, .text, .text:v$3) BSS_BOOT_LIB (.bss))' + +# Nucleus +build_lib nucleus_flash +build_lib nucleus_intram +lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))' + +# TI's libc/libgcc equivalent +blob_lib rts16le_flash +blob_lib rts16le_int_ram +lib_link_magic '(BSS_LIBS (.bss))' + +# generate the top level Makefile! + +helpers/makeline def CONFIG_NAME "$CONFIG$SUFFIX" > $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile +helpers/makeline def TARGET $TARGET >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile +helpers/makeline def SUBDIR $SUBDIR >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile +helpers/makeline def LIBS $LIBS >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile +helpers/makeline def SPECIAL_LINK_LIBS $SPECIAL_LINK_LIBS >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile +helpers/makeline def LINK_SCRIPT_SRC ../$LINK_SCRIPT_SRC >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile + +if [ -n "$RAM_LINK_SCRIPT_SRC" ] +then + helpers/makeline def RAM_LINK_SCRIPT_SRC ../$RAM_LINK_SCRIPT_SRC \ + >> $BUILD_DIR/Makefile + echo >> $BUILD_DIR/Makefile +fi + +helpers/makeline def FLASH_BASE_ADDR $FLASH_BASE_ADDR >> $BUILD_DIR/Makefile +helpers/makeline def FLASH_SECTOR_SIZE $FLASH_SECTOR_SIZE >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile + +if [ "$USE_STR2IND" = 1 ] +then + helpers/makeline def STR2IND_OBJ str2ind.obj >> $BUILD_DIR/Makefile +else + echo 'STR2IND_OBJ=' >> $BUILD_DIR/Makefile +fi +echo >> $BUILD_DIR/Makefile + +cat makefile-frags/first-part >> $BUILD_DIR/Makefile + +if [ "$USE_STR2IND" = 1 ] +then + cat makefile-frags/str2ind >> $BUILD_DIR/Makefile +fi + +cat makefile-frags/link-steps >> $BUILD_DIR/Makefile + +case "$TARGET" in + c11x|c139|j100) + cat makefile-frags/m0-to-bin-c139 >> $BUILD_DIR/Makefile + ;; + c155) + cat makefile-frags/m0-to-bin-c155 >> $BUILD_DIR/Makefile + ;; + *) + cat makefile-frags/m0-to-bin-std >> $BUILD_DIR/Makefile + ;; +esac + +cat makefile-frags/flash-script-gen >> $BUILD_DIR/Makefile + +if [ -n "$RAM_LINK_SCRIPT_SRC" ] +then + cat makefile-frags/ram-link-steps >> $BUILD_DIR/Makefile +fi + +cat makefile-frags/clean-always >> $BUILD_DIR/Makefile +echo >> $BUILD_DIR/Makefile +echo 'FRC:' >> $BUILD_DIR/Makefile + +# All done! + +echo "Run make in $BUILD_DIR to compile the firmware"