FreeCalypso > hg > fc-tourmaline
view doc/Luna-notes @ 274:fa22012c4a39
CST: remove AT%Nxxxx old AEC control
This crude method of enabling and configuring AEC is not compatible
with L1_NEW_AEC, and even for the old AEC it did not support every
possible combination. It is time for this hack to go. The new and
proper way of enabling and configuring AEC is via RiViera Audio Service
audio mode facility, either audio mode files or full access write,
most directly accessible via fc-tmsh auw 12 for free experimentation.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:57:36 +0000 |
| parents | a62e5bf88434 |
| children |
line wrap: on
line source
FreeCalypso Luna phone handset UI development platform consists of these 3 components: * A Caramel-type Calypso motherboard, either iWOW DSK or FC Caramel2 * An LCD carrier board, currently using HaoRan HT020K1QC36S LCD module * A 5x5 keyswitch matrix board for the keypad function This Luna is our primary official platform for FreeCalypso phone handset UI development. The UI code we got from TI comes in two interesting versions: * Big color version: 176x220 pixels, 16-bit color * Small B&W version: originally 84x48 pixels, we are extending it to 96x64 pix (Originally there was also a third version, large 176x220 pix B&W, but we find it uninteresting and we've removed it from our supported set. It was really nothing more than a hack to display a minimal-effort derivative of the original small B&W UI on the large D-Sample LCD, so we are not removing anything of any real substance here.) FC Luna hardware is required for anyone who wishes to work on the phone handset UI project in FC Tourmaline: it is the only target platform that can display both versions of our work-in-progress UI firmware. Mot C1xx and other similar phones have small LCDs that can only display the small B&W version of our TI-based UI, and in the Mother's opinion working solely on the smallbw version to the exclusion of the bigcolor version is not acceptable.