view src/g23m-aci/aci/cmh_ra.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_RA
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler of Rate Adaptation
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_RA_H
#define CMH_RA_H

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/

typedef struct entRaStatus          /* entity status */
{
  T_ACI_CMD_SRC  entOwn;          /* entity owner */
  T_ACI_AT_CMD   curCmd;          /* current command processing */
  BOOL           isTempDisconnected;            
} T_RA_ENT_STAT;

/*==== PROTOTYPES =================================================*/
EXTERN void         cmhRA_Deactivated( SHORT cId );
EXTERN void         cmhRA_Activated  ( SHORT cId );
EXTERN UBYTE        cmhRA_SelTrfProt ( SHORT cId );
EXTERN UBYTE        cmhRA_SelChnRate ( void );
EXTERN UBYTE        cmhRA_SelUsrRate ( SHORT cId );
EXTERN UBYTE        cmhRA_SelDataBits( SHORT cId );
EXTERN UBYTE        cmhRA_SelStopBits( SHORT cId ); 
EXTERN T_ACI_RETURN cmhRA_Activate   ( T_ACI_CMD_SRC srcId, 
                                       T_ACI_AT_CMD cmdId,
                                       SHORT cId );
EXTERN T_ACI_RETURN cmhRA_Deactivate ( void );
EXTERN T_ACI_RETURN cmhRA_SendBreak  ( T_ACI_CMD_SRC srcId,
                                       USHORT        break_len);
EXTERN T_ACI_RETURN cmhRA_Escape     ( void );

#ifdef FF_FAX
EXTERN UBYTE        cmhRA_SelBitOrder( T_ACI_CMD_SRC srcId );
EXTERN T_ACI_RETURN cmhRA_Modify     ( T_ACI_CMD_SRC srcId,
                                       SHORT         cId );   
#endif /* FF_FAX */

/*==== EXPORT =====================================================*/

/* FAX_AND_DATA related Command Parameters... moved from cmh.h */

typedef struct l2rCmdPrm      /* command parameters related to L2R */
{
  USHORT        CRLPiws;
  USHORT        CRLPmws;
  USHORT        CRLPt1;
  USHORT        CRLPn2;
  T_ACI_DS_DIR  DSdir;
  T_ACI_DS_COMP DScomp;
  LONG          DSmaxDict;
  SHORT         DSmaxStr;
} T_L2R_CMD_PRM;

#ifdef FF_FAX

typedef struct t30CmdPrm      /* command parameters related to T30 */
{
  T_ACI_FCLASS_CLASS  FCLASSclass;
  T_ACI_FCR_VAL       FCRval;
  T_ACI_F_VR          FCCvr;
  T_ACI_F_BR          FCCbr;
  T_ACI_F_WD          FCCwd;
  T_ACI_F_LN          FCCln;
  T_ACI_F_DF          FCCdf;
  T_ACI_F_EC          FCCec;
  T_ACI_F_BF          FCCbf;
  T_ACI_F_ST          FCCst;
  T_ACI_F_JP          FCCjp;
  T_ACI_F_VR          FISvr;
  T_ACI_F_BR          FISbr;
  T_ACI_F_WD          FISwd;
  T_ACI_F_LN          FISln;
  T_ACI_F_DF          FISdf;
  T_ACI_F_EC          FISec;
  T_ACI_F_BF          FISbf;
  T_ACI_F_ST          FISst;
  T_ACI_F_JP          FISjp;
  CHAR                FLIstr[MAX_ID_CHAR];
  CHAR                FPIstr[MAX_ID_CHAR];
  T_ACI_FLP_VAL       FLPval;
  T_ACI_FAP_VAL       FAPsub;
  T_ACI_FAP_VAL       FAPsep;
  T_ACI_FAP_VAL       FAPpwd;
  CHAR                FSAsub[MAX_ID_CHAR];
  CHAR                FPAsep[MAX_ID_CHAR];
  CHAR                FPWpwd[MAX_ID_CHAR];
  UBYTE               FNSoct[MAX_NSF_BYTE];
  UBYTE               FNSlen;
  T_ACI_FCQ_RQ        FCQrq;
  T_ACI_F_BR          FMSbr;
  T_ACI_FPS_PPR       FPSppr;
  T_ACI_FSP_VAL       FSPval;
  T_ACI_FIE_VAL       FIEval;
  T_ACI_FIT_ACT       FITact;
  LONG                FITtime;
  T_ACI_FBO_VAL       FBOval;

} T_T30_CMD_PRM;

#endif /* FF_FAX */

typedef struct fnd_cmhCmdPrm      /* fax_n_data handler command parameter */
{
  T_L2R_CMD_PRM l2rCmdPrm;
#ifdef FF_FAX
  T_T30_CMD_PRM t30CmdPrm;
#endif
} FND_T_CMH_PRM;


#ifdef CMH_RAF_C

GLOBAL T_RA_ENT_STAT raEntStat;
GLOBAL FND_T_CMH_PRM  fnd_cmhPrm[CMD_SRC_MAX];
#else

EXTERN T_RA_ENT_STAT raEntStat;
EXTERN FND_T_CMH_PRM  fnd_cmhPrm[CMD_SRC_MAX];
#endif /* CMH_RAF_C */

#endif /* CMH_RA_H */

/*==== EOF =======================================================*/