FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/tpu_drivers/source/makefile_pc @ 268:f2e52cab0a73

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

#        Filename makefile_pc
#        Version  1.9
#        Date     09/18/02
#        
#       Makefile for GSM TPU drivers - PC version
#
#       Copyright (c) Texas Instruments 1996
#      
#
.SUFFIXES: .obj $(SUFFIXES)


# Grab customer and rf id's
#--------------------------
CUST=$(cust)
RF=$(rf)
CHIPSET=$(bsb)
ANALOG=$(anl)
DSP=$(dsp)
BOARD=$(board)
LONG_JUMP=$(ljump)
TESTMODE=$(testmode)

# Directories for PC system
#----------------------------
ARMTOOLS =u:/470tools
PTOOL_DIR =u:/470tools/ptool/tools

CL470_0 = $(ARMTOOLS)/cl470
CL470_1 = $(PTOOL_DIR)/pcl470
CL470_2 = $(PTOOL_DIR)/vcl470

CL470 = $(CL470_$(LONG_JUMP))
AR470   =$(ARMTOOLS)/ar470
ASM470  =$(ARMTOOLS)/asm470

# Source code path
#-----------------
SOURCE=../source$(CUST)

# Include file source paths
#--------------------------
INCLUDE = \
	-I../../nucleus/include \
	-I../../include \
	-I../../drivers1/common \
	-I../source$(CUST) \
	-I../../cust$(CUST) \
	-I../../tm_include \
  -I../../audio_include \
  -I../../audio_cust$(CUST) \
  -I../../hint
 
DEPEND = $(SOURCE)/tpudrv$(RF).h \
	../../include/l1_time.h \
	../../drivers1/common/iq.h \
	../../cust$(CUST)/l1_rf$(RF).h \
	tpudrv.h


# Object files path
#------------------
OBJ=$(SOURCE)/obj
OBJS=obj_$(CHIPSET)_$(ANALOG)

# EXECUTION TARGET
#-----------------
all:	../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib 

clean:
	-rm obj/tpudrv.obj_$(ANALOG) $(OBJ)/tpudrv$(RF).obj_$(ANALOG)_$(BOARD) 
	-rm ../lib/tpudrv_$(CUST)_$(RF)_$(ANALOG)_$(BOARD)_$(LONG_JUMP).lib

# How to...
#----------

#...generate the library
#-----------------------
../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib: obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj
	$(AR470) r $@ obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj

#...generate the common object file
#----------------------------------
obj/tpudrv.obj_$(CHIPSET)_$(ANALOG): $(DEPEND) tpudrv.c
	$(CL470) $(INCLUDE) -i$(ARMTOOLS)  -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr obj -eo$(OBJS) tpudrv.c


#...generate the target dependant object file
#--------------------------------------------
$(OBJ)/tpudrv$(RF).obj: $(DEPEND) $(SOURCE)/tpudrv$(RF).c 
	$(CL470) $(INCLUDE) -i$(ARMTOOLS)  -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) $(SOURCE)/tpudrv$(RF).c