FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/tpu_drivers/source/makefile_p @ 268:f2e52cab0a73

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

#    Filename makefile_p                  
#        
#       Makefile for GSM TPU drivers - UNIX version
#
#       Copyright (c) Texas Instruments 2003
#      
#
.SUFFIXES: .obj $(SUFFIXES)


# Grab customer and rf id's
#--------------------------
CUST=$(cust)
RF=$(rf)
CHIPSET=$(bsb)
ANALOG=$(anl)
DSP=$(dsp)
BOARD=$(board)
LONG_JUMP=$(ljump)
TESTMODE=$(testmode)

# Call of external makefile to extract RF_FAM and ANLG_FAM
#---------------------------------------------------------
include ../../tools/define_split.mak


CL470_0 = cl470
CL470_3 = perl ../../tools/icl470.pl cl470

CL470 = $(CL470_$(LONG_JUMP))
AR470 = ar470

# Source code path
#-----------------
SOURCE=../source$(CUST)
PSOURCE=../p_source$(CUST)

# Include file source paths
#--------------------------
INCLUDE = -I../../include -I../../drivers1/common -I../source$(CUST) -I../../cust$(CUST) \
          -I../../tm_include -I../p_source$(CUST) -I../../audio_include \
          -I../../audio_cust$(CUST) -I../../hint -I../../gtt_include
           
DEPEND = $(SOURCE)/tpudrv$(RF_FAM).h ../../include/l1_time.h ../../drivers1/common/iq.h \
         ../../cust$(CUST)/l1_rf$(RF_FAM).h tpudrv.h ../../include/l1_sw.cfg ../../include/l1_hw.cfg \
         ../../include/l1_confg.h

# Object files path
#------------------
OBJ=$(SOURCE)/obj
OBJS=obj

# EXECUTION TARGET
#-----------------
all:	../lib/tpudrv_$(CUST)_$(RF_FAM)_$(CHIPSET)_$(ANLG_FAM)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib 

clean:
	-rm obj/tpudrv.obj $(OBJ)/tpudrv$(RF_FAM).obj $(OBJ)/p_tpudrv$(RF_FAM).obj \
        -rm ../lib/tpudrv_$(CUST)_$(RF_FAM)_$(ANLG_FAM)_$(BOARD)_$(LONG_JUMP).lib

# How to...
#----------

#...generate the library
#-----------------------
../lib/tpudrv_$(CUST)_$(RF_FAM)_$(CHIPSET)_$(ANLG_FAM)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib: obj/tpudrv.obj $(OBJ)/tpudrv$(RF_FAM).obj $(OBJ)/p_tpudr$(RF_FAM).obj
	$(AR470) r $@ obj/tpudrv.obj $(OBJ)/tpudrv$(RF_FAM).obj $(OBJ)/p_tpudr$(RF_FAM).obj

#...generate the common object file
#----------------------------------
obj/tpudrv.obj: $(DEPEND) tpudrv.c
	$(CL470) $(INCLUDE) -i$(ARMTOOLS)  -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr obj -eoobj tpudrv.c


#...generate the target dependant object file
#--------------------------------------------
$(OBJ)/tpudrv$(RF_FAM).obj: $(DEPEND) $(SOURCE)/tpudrv$(RF_FAM).c 
	$(CL470) $(INCLUDE) -i$(ARMTOOLS)  -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) -eoobj $(SOURCE)/tpudrv$(RF_FAM).c 

#...generate the target dependant GPRS object file
#-------------------------------------------------
$(OBJ)/p_tpudr$(RF_FAM).obj: $(DEPEND) $(PSOURCE)/p_tpudr$(RF_FAM).c 
	$(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) -eoobj $(PSOURCE)/p_tpudr$(RF_FAM).c