view cdg-hybrid/sap/rlp.pdf @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : rlp.pdf
;*** Creation       : Wed Mar 11 09:58:42 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : rlp
;*** Document No.   : 8411.101.98.115
;*** Document Date  : 2002-04-22
;*** Document Status: BEING_PROCESSED
;*** Document Author: slo
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:51:48 2007"
PRAGMA 	LAST_MODIFIED 	"2002-04-22"
PRAGMA 	ID_AND_VERSION 	"8411.101.98.115"



CONST 	RLP_HEADER_LEN 	16 	; Length of RLP header in bits
CONST 	RLP_TRAILER_LEN 	0 	; Length of RLP trailer in bits



VALTAB 	VAL_pt
VAL 	0 	RLP_COMPR_TYPE_V42BIS 	"V.42bis"

VALTAB 	VAL_p0
VAL 	0 	RLP_COMP_DIR_NONE 	"compress in neither direction"
VAL 	1 	RLP_COMP_DIR_TRANSMIT 	"compress in uplink direction only"
VAL 	2 	RLP_COMP_DIR_RECEIVE 	"compress in downlink direction only"
VAL 	3 	RLP_COMP_DIR_BOTH 	"compress in both directions"

VALTAB 	VAL_rate
VAL 	0 	RLP_HALFRATE_4800 	"halfrate 4,8/6 kBit"
VAL 	1 	RLP_FULLRATE_4800 	"fullrate 4,8/6 kBit"
VAL 	2 	RLP_FULLRATE_9600 	"fullrate 9,6/12 kBit"
VAL 	3 	RLP_FULLRATE_14400 	"fullrate 13,4/14,4 kBit"

VALTAB 	VAL_ack_flg
VAL 	0 	RLP_ACK 	"acknowledged"
VAL 	1 	RLP_NAK 	"not acknowledged"

VALTAB 	VAL_cause
VAL 	0xC200 	RLP_ERR_PF_RETRANS 	"Max Retransmissions of Poll reached"
VAL 	0xC201 	RLP_ERR_XID_RETRANS 	"Max Retransmissions of XID reached"
VAL 	0xC202 	RLP_ERR_SABM_RETRANS 	"Max Retransmissions of SABM reached"
VAL 	0xC203 	RLP_ERR_DISC_RETRANS 	"Max Retransmissions of DISC reached"
VAL 	0xC204 	RLP_ERR_REMAP_RETRANS 	"Max Retransmissions of REMAP reached"
VAL 	0xC210 	RLP_ERR_SDU_TO_SMALL 	"Received SDU is to small"
VAL 	0xC220 	RLP_ERR_INTERNAL 	"Internal error"




VAR 	rlp_vers 	"rlp version number" 	B


VAR 	k_ms_iwf 	"window size ms -> iwf" 	S


VAR 	k_iwf_ms 	"window size iwf -> ms" 	S


VAR 	t1 	"acknowledge timer" 	B


VAR 	t2 	"reply delay" 	B


VAR 	n2 	"maximum numer of retransmission attempts" 	B


VAR 	pt 	"type of data compression" 	B

VAL 	@p_rlp - VAL_pt@ 	

VAR 	p0 	"v.42bis data compression direction" 	B

VAL 	@p_rlp - VAL_p0@ 	

VAR 	p1 	"v.42 bis number of possible codewords" 	S


VAR 	p2 	"v.42 bis maximum encodable string length" 	B


VAR 	bytes_per_prim 	"bytes per primitive" 	S


VAR 	rate 	"transmission rate" 	B

VAL 	@p_rlp - VAL_rate@ 	

VAR 	ack_flg 	"acknowledge flag" 	B

VAL 	@p_rlp - VAL_ack_flg@ 	

VAR 	l_buf 	"length of content in bit" 	S


VAR 	o_buf 	"offset of content in bit" 	S


VAR 	buf 	"buffer content" 	B


VAR 	cause 	"cause" 	S

VAL 	@p_rlp - VAL_cause@ 	

VAR 	error_rate 	"error_rate" 	L


VAR 	reserved 	"Reserved" 	B


VAR 	data_size 	"data size" 	S





COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length of content in bit
 	o_buf 	 ; offset of content in bit
 	buf 	[1] 	 ; buffer content
}






; RLP_ATTACH_REQ 	0x80000011
; RLP_DETACH_REQ 	0x80010011
; RLP_DETACH_CNF 	0x80004011
; RLP_CONNECT_REQ 	0x80020011
; RLP_CONNECT_IND 	0x80014011
; RLP_CONNECT_RES 	0x80030011
; RLP_CONNECT_CNF 	0x80024011
; RLP_DISC_REQ 	0x80040011
; RLP_DISC_IND 	0x80034011
; RLP_DISC_CNF 	0x80044011
; RLP_RESET_REQ 	0x80050011
; RLP_RESET_IND 	0x80054011
; RLP_RESET_RES 	0x80060011
; RLP_RESET_CNF 	0x80064011
; RLP_READY_IND 	0x80074011
; RLP_DATA_REQ 	0x80070011
; RLP_GETDATA_REQ 	0x80080011
; RLP_DATA_IND 	0x80084011
; RLP_UI_REQ 	0x80090011
; RLP_UI_IND 	0x80094011
; RLP_XID_IND 	0x800A4011
; RLP_ERROR_IND 	0x800B4011
; RLP_STATISTIC_IND 	0x800C4011
; RLP_REMAP_REQ 	0x800A0011
; RLP_REMAP_CNF 	0x800D4011
; RLP_REMAP_DATA_IND 	0x800E4011
; RLP_REMAP_DATA_RES 	0x800B0011



PRIM 	RLP_ATTACH_REQ 	0x80000011
{
 	k_ms_iwf 	 ; window size ms->iwf
 	k_iwf_ms 	 ; window size iwf->ms
 	t1 	 ; acknowledge timer
 	t2 	 ; reply delay
 	n2 	 ; retransmission attempts
 	pt 	 ; type of data compression
 	p0 	 ; v.42 bis data compression request
 	p1 	 ; v.42 bis number of possible codewords
 	p2 	 ; v.42 bis maximum encodable data string length
 	bytes_per_prim 	 ; bytes per primitive
 	rate 	 ; transmission rate
}






PRIM 	RLP_DETACH_REQ 	0x80010011
{
}






PRIM 	RLP_DETACH_CNF 	0x80004011
{
}






PRIM 	RLP_CONNECT_REQ 	0x80020011
{
}






PRIM 	RLP_CONNECT_IND 	0x80014011
{
}






PRIM 	RLP_CONNECT_RES 	0x80030011
{
 	ack_flg 	 ; acknowledge flag
}






PRIM 	RLP_CONNECT_CNF 	0x80024011
{
 	ack_flg 	 ; acknowledge flag
}






PRIM 	RLP_DISC_REQ 	0x80040011
{
}






PRIM 	RLP_DISC_IND 	0x80034011
{
}






PRIM 	RLP_DISC_CNF 	0x80044011
{
}






PRIM 	RLP_RESET_REQ 	0x80050011
{
}






PRIM 	RLP_RESET_IND 	0x80054011
{
}






PRIM 	RLP_RESET_RES 	0x80060011
{
}






PRIM 	RLP_RESET_CNF 	0x80064011
{
}






PRIM 	RLP_READY_IND 	0x80074011
{
}






PRIM 	RLP_DATA_REQ 	0x80070011
{
 	reserved 	[4] 	 ; reserved
 	sdu 	 ; service data unit
}






PRIM 	RLP_GETDATA_REQ 	0x80080011
{
}






PRIM 	RLP_DATA_IND 	0x80084011
{
 	data_size 	 ; data size
 	reserved 	[2] 	 ; reserved
 	sdu 	 ; service data unit
}






PRIM 	RLP_UI_REQ 	0x80090011
{
 	sdu 	 ; service data unit
}






PRIM 	RLP_UI_IND 	0x80094011
{
 	sdu 	 ; service data unit
}






PRIM 	RLP_XID_IND 	0x800A4011
{
 	rlp_vers 	 ; RLP version no.
 	k_ms_iwf 	 ; window size ms->iwf
 	k_iwf_ms 	 ; window size iwf->ms
 	t1 	 ; acknowledge timer
 	t2 	 ; reply delay
 	n2 	 ; retransmission attempts
 	pt 	 ; type of data compression
 	p0 	 ; v.42 bis data compression request
 	p1 	 ; v.42 bis number of possible codewords
 	p2 	 ; v.42 bis maximum encodable data string length
}






PRIM 	RLP_ERROR_IND 	0x800B4011
{
 	cause 	 ; error cause
}






PRIM 	RLP_STATISTIC_IND 	0x800C4011
{
 	error_rate 	 ; error rate
}






PRIM 	RLP_REMAP_REQ 	0x800A0011
{
 	rate 	 ; transmission rate
}






PRIM 	RLP_REMAP_CNF 	0x800D4011
{
}






PRIM 	RLP_REMAP_DATA_IND 	0x800E4011
{
 	data_size 	 ; data size
 	reserved 	[2] 	 ; reserved
 	sdu 	 ; service data unit
}






PRIM 	RLP_REMAP_DATA_RES 	0x800B0011
{
}