view cdg-hybrid/msg/t30.mdf @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : t30.mdf
;*** Creation       : Thu Jun 19 15:32:14 CST 2008
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Air Interface Message Specification
;*** Document Name  : t30
;*** Document No.   : 8411.620.98.101
;*** Document Date  : 2000-02-04
;*** Document Status: BEING_PROCESSED
;*** Document Author: UB
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Wed Nov 28 10:21:26 2007"
PRAGMA 	LAST_MODIFIED 	"2000-02-04"
PRAGMA 	ID_AND_VERSION 	"8411.620.98.101"



CONST 	MAX_NSF_LEN 	720 	; number of bits in non-standard facility element.



VALTAB 	VAL_v8
VAL 	0 	v8_not_avail 	"V.8 is not available"
VAL 	1 	v8_avail 	"V.8 is available"

VALTAB 	VAL_n_byte
VAL 	0 	NB_256_BYTES 	"256 octets preferred in ECM"
VAL 	1 	NB_64_BYTES 	"64 octets preferred in ECM"

VALTAB 	VAL_ready_tx_fax
VAL 	0 	RTF_NO_TX_RDY 	"not ready to transmit a facsimile document"
VAL 	1 	RTF_TX_RDY 	"ready to transmit a facsimile document"

VALTAB 	VAL_rec_fax_op
VAL 	0 	RFO_NO_RX_RDY 	"not ready to receive a facsimile document"
VAL 	1 	RFO_RX_RDY 	"ready to receive a facsimile document"

VALTAB 	VAL_data_sig_rate
VAL 	DEF 	 	"undefined signalling rate"
VAL 	0 	DSR_2400_V27 	"signalling rate 2400 bps V.27 ter"
VAL 	4 	DSR_4800_V27 	"signalling rate 4800 bps V.27 ter"
VAL 	12 	DSR_7200_V29 	"signalling rate 7200 bps V.29"
VAL 	13 	DSR_7200_V17 	"signalling rate 7200 bps V.17"
VAL 	8 	DSR_9600_V29 	"signalling rate 9600 bps V.29"
VAL 	9 	DSR_9600_V17 	"signalling rate 9600 bps V.17"
VAL 	5 	DSR_12000_V17 	"signalling rate 12000 bps V.17"
VAL 	1 	DSR_14000_V17 	"signalling rate 14400 bps V.19"

VALTAB 	VAL_R8_lines_pels
VAL 	0 	R8LP_R8_ONLY 	"vertical resolution is specified by R8 only"
VAL 	1 	R8LP_R8_EXTENDED 	"vertical resolution is specified not only by R8"

VALTAB 	VAL_two_dim_coding
VAL 	0 	TDC_NO_2D_CODING 	"no 2D T.4 coding"
VAL 	1 	TDC_2D_CODING 	"2D T.4 coding"

VALTAB 	VAL_rec_width
VAL 	0 	RW_WIDTH_215_MM 	"Scan line length of 215 mm"
VAL 	1 	RW_WIDTH_303_MM 	"Scan line length of 215, 255 and 303 mm"
VAL 	2 	RW_WIDTH_255_MM 	"Scan line length of 215 and 255 mm"
VAL 	3 	RW_WIDTH_INVALID 	"Invalid scan line length"

VALTAB 	VAL_max_rec_len
VAL 	0 	MRL_A4 	"Maximum recording length A4 (297 mm)"
VAL 	1 	MRL_UNLIMITED 	"Unlimited recording length"
VAL 	2 	MRL_B4 	"Maximum recording length B4 (364 mm)"
VAL 	3 	MRL_INVALID 	"Invalid recording length"

VALTAB 	VAL_min_scan_time
VAL 	0 	MST_20_MS 	"20 ms at 3.85 1/mm: T7.7 = T3.85"
VAL 	1 	MST_40_MS 	"40 ms at 3.85 1/mm: T7.7 = T3.85"
VAL 	2 	MST_10_MS 	"10 ms at 3.85 1/mm: T7.7 = T3.85"
VAL 	3 	MST_5_MS 	"5 ms at 3.85 1/mm: T7.7 = T3.85"
VAL 	4 	MST_10_MS_HALF 	"10 ms at 3.85 1/mm: T7.7 = 1/2 T3.85"
VAL 	5 	MST_20_MS_HALF 	"20 ms at 3.85 1/mm: T7.7 = 1/2 T3.85"
VAL 	6 	MST_40_MS_HALF 	"40 ms at 3.85 1/mm: T7.7 = 1/2 T3.85"
VAL 	7 	MST_0_MS 	"0 ms at 3.85 1/mm: T7.7 = T3.85"

VALTAB 	VAL_uncomp_mode
VAL 	0 	UCM_COMPRESSED 	"T.4 data (can be send)/(are) in compressed mode"
VAL 	1 	UCM_UNCOMPRESSED 	"T.4 data (can be send)/(are) in uncompressed mode"

VALTAB 	VAL_err_corr_mode
VAL 	0 	ECM_OFF 	"Error correction mode is not possible/off"
VAL 	1 	ECM_ON 	"Error correction mode is possible/on"

VALTAB 	VAL_t6_coding
VAL 	0 	T6_CODING_OFF 	"T.6 coding is not possible/off"
VAL 	1 	T6_CODING_ON 	"T.6 coding is possible/on"

VALTAB 	VAL_R8_lines
VAL 	0 	R8_LINES_OFF 	"R8 x 15.4 lines/mm is not possible/off"
VAL 	1 	R8_LINES_ON 	"R8 x 15.4 lines/mm is possible/on"

VALTAB 	VAL_r_300_pels
VAL 	0 	R300_PELS_OFF 	"Res 300 x 300 pels /25.4 mm is not possible/off"
VAL 	1 	R300_PELS_ON 	"Res 300 x 300 pels /25.4 mm is possible/on"

VALTAB 	VAL_R16_lines_pels
VAL 	0 	R16_LINES_PELS_OFF 	"R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm mode is not possible/off"
VAL 	1 	R16_LINES_PELS_ON 	"R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm mode is possible/on"

VALTAB 	VAL_i_res_pref
VAL 	0 	IRP_NO_INCH_BASED 	"Inch-based resolution not preferred"
VAL 	1 	IRP_INCH_BASED 	"Inch-based resolution preferred"

VALTAB 	VAL_m_res_pref
VAL 	0 	IRP_NO_METRIC_BASED 	"Metric-based resolution not preferred"
VAL 	1 	IRP_METRIC_BASED 	"Metric-based resolution preferred"

VALTAB 	VAL_min_scan_time_hr
VAL 	0 	MST_T154_EQ_T77 	"T15.4 = T7.7"
VAL 	1 	MST_T154_EQ_HALF_T77 	"T15.4 = 0.5 x T7.7"

VALTAB 	VAL_sel_polling
VAL 	0 	SEP_NO_POLLING 	"Selective polling not possible"
VAL 	1 	SEP_POLLING 	"Selective polling possible"

VALTAB 	VAL_subaddr
VAL 	0 	SA_NO_SUBADDRESSING 	"Sub-addressing is not possible/intended"
VAL 	1 	SA_SUBADDRESSNIG 	"Sub-addressing is possible/intended"

VALTAB 	VAL_password
VAL 	0 	PW_NO_PASSWORD 	"Password checking is not possible/intended"
VAL 	1 	PW_PASSWORD 	"Password checking is possible/intended"

VALTAB 	VAL_ready_tx_doc
VAL 	0 	RTD_TX_READY 	"Ready to transmit a data file"
VAL 	1 	RTD_NOT_TX_READY 	"Not ready to transmit a data file"

VALTAB 	VAL_bft
VAL 	0 	BFT_NO_BIN_FILE_TX 	"Not possible/intended to transmit a binary file"
VAL 	1 	BFT_BIN_FILE_TX 	"Possibility/intention to transmit a binary file"

VALTAB 	VAL_dtm
VAL 	0 	DTM_NO_DOC_TX_MODE 	"Not possible/intended to perform the DTM"
VAL 	1 	DTM_DOC_TX_MODE 	"Possibility/intention to perform the DTM"

VALTAB 	VAL_edi
VAL 	0 	EDI_NO_ELEC_DATA_XCHNG 	"Not possible/intended to perform EDI"
VAL 	1 	EDI_ELEC_DATA_XCHNG 	"Possibility/intention to perform EDI"

VALTAB 	VAL_btm
VAL 	0 	BTM_NO_BASIC_TRANS_MODE 	"Not possible/intended to perform the BTM"
VAL 	1 	BTM_BASIC_TRANS_MODE 	"Possibility/intention to perform the BTM"

VALTAB 	VAL_ready_tx_mixed
VAL 	0 	RTM_NO_READY_TX_MIXED 	"Not ready to transmit a character or mixed mode document"
VAL 	1 	RTM_READY_TX_MIXED 	"Ready to transmit a character or mixed mode document"

VALTAB 	VAL_char_mode
VAL 	0 	CM_NO_CHARACTER_MODE 	"Not possible/intended to perform the character mode"
VAL 	1 	CM_CHARACTER_MODE 	"Possibility/intention to perform the character mode"

VALTAB 	VAL_mixed_mode
VAL 	0 	MM_NO_MIXED_MODE 	"Not possible/intended to perform the mixed mode"
VAL 	1 	MM_MIXED_MODE 	"Possibility/intention to perform the mixed mode"

VALTAB 	VAL_proc_mode_26
VAL 	0 	PM_NO_PROC_MODE_26 	"Not possible/intended to perform the processable mode 26"
VAL 	1 	PM_PROC_MODE_26 	"Possibility/intention to perform the processable mode 26"

VALTAB 	VAL_dig_network_cap
VAL 	0 	DNC_NO_DIGITAL_NETWORK 	"Terminal is not on a digital network"
VAL 	1 	DNC_DIGITAL_NETWORK 	"Terminal is on a digital network"

VALTAB 	VAL_duplex
VAL 	0 	DUP_HALF_DUPLEX 	"Operate in half duplex mode only"
VAL 	1 	DUP_FULL_DUPLEX 	"Operate in full-duplex or half duplex mode"

VALTAB 	VAL_jpeg
VAL 	0 	JPG_NO_CODING 	"Not able/intent to code documents in JPEG"
VAL 	1 	JPG_CODING 	"Able/intent to code documents in JPEG"

VALTAB 	VAL_full_colour
VAL 	0 	FC_NO_FULL_COLOR_MODE 	"Not able/intent to work in full colour mode"
VAL 	1 	FC_FULL_COLOR_MODE 	"Able/intent to work in full colour mode"

VALTAB 	VAL_r_12_bits_pel_comp
VAL 	0 	BPP_8_BITS_PER_PEL 	"Images must/are digitised with 8 bits/pel"
VAL 	1 	BPP_12_BITS_PER_PEL 	"Images may be/are digitised with up to 12 bits/pel"

VALTAB 	VAL_no_subsamp
VAL 	0 	NS_USE_4_1_1_SUB 	"Use the 4:1:1 sub-sampling ratio for the chrominance components in the image data"
VAL 	1 	NS_NO_SUBSAMPLING 	"Use no sub-sampling ratio for the chrominance components in the image data"

VALTAB 	VAL_cust_illum
VAL 	0 	CI_USE_D50_ILLUM 	"Only the standard D50 illuminant for colour images supported/used"
VAL 	1 	CI_CUSTOM_ILLUM 	"Standard D50 illuminant and other illuminants are supported/used for colour images"

VALTAB 	VAL_cust_gamut
VAL 	0 	CG_STD_GAMUT_RNG 	"Only the default gamut range for colour images supported/used"
VAL 	1 	CG_CUST_GAMUT_RNG 	"Other gamut  ranges are supported/used for colour images"

VALTAB 	VAL_na_letter
VAL 	0 	NLT_NO_NORTH_AMERICAN_LETTER 	"No North American Letter format is supported/used"
VAL 	1 	NLT_NORTH_AMERICAN_LETTER 	"No North American Letter format is supported/used"

VALTAB 	VAL_na_legal
VAL 	0 	NLG_NO_NORTH_AMERICAN_LEGAL 	"No North American Legal format is supported/used"
VAL 	1 	NLG_NORTH_AMERICAN_LEGAL 	"No North American Legal format is supported/used"

VALTAB 	VAL_sing_prog_seq_coding_basic
VAL 	0 	SPG_NO_SINGLE_PROG_BASIC 	"No single-progression sequential coding basic is supported/used"
VAL 	1 	SPG_SINGLE_PROG_BASIC 	"Single-progression sequential coding basic is supported/used"

VALTAB 	VAL_sing_prog_seq_coding_L0
VAL 	0 	SPG_NO_SINGLE_PROG_L0 	"No single-progression sequential coding optional L0 is supported/used"
VAL 	1 	SPG_SINGLE_PROG_L0 	"Single-progression sequential coding optional L0 is supported/used"

VALTAB 	VAL_frame_size
VAL 	0 	FS_256_OCTETS 	"Frame size of 256 octets is used if ECM is active"
VAL 	1 	FS_64_OCTETS 	"Frame size of 64 octets is used if ECM is active"

VALTAB 	VAL_resolution_type
VAL 	0 	RT_METRIC_BASED 	"Metric based resolution"
VAL 	1 	RT_INCH_BASED 	"Inch based resolution"

VALTAB 	VAL_huffman_tables
VAL 	0 	HT_NO_HUFFMAN_TABLES 	"No default Huffman tables used"
VAL 	1 	HT_HUFFMAN_TABLES 	"Default Huffman tables used"




VAR 	fcf 	"Facsimile control field" 	
 	8


VAR 	cld_sub_nr 	"called subscriber number" 	
 	8


VAR 	clg_sub_nr 	"calling subscriber number" 	
 	8


VAR 	tra_sub_nr 	"transmitting subscriber number" 	
 	8


VAR 	pm_sub_addr 	"Polling mode sub-address" 	
 	8


VAR 	sub_addr 	"Sub-address" 	
 	8


VAR 	non_std_fac 	"Non-standard facility content" 	
 	MAX_NSF_LEN


VAR 	pm_pword 	"Password for polling" 	
 	8


VAR 	sm_pword 	"Password for sendingf" 	
 	8


VAR 	v8 	"V.8" 	
 	1

VAL 	@m_t30 - VAL_v8@ 	

VAR 	n_byte 	"no. of octets preferred" 	
 	1

VAL 	@m_t30 - VAL_n_byte@ 	

VAR 	ready_tx_fax 	"Ready to transmit a facsimile document (polling)" 	
 	1

VAL 	@m_t30 - VAL_ready_tx_fax@ 	

VAR 	rec_fax_op 	"Receiver fax operation" 	
 	1

VAL 	@m_t30 - VAL_rec_fax_op@ 	

VAR 	data_sig_rate 	"data signalling rate" 	
 	4

VAL 	@m_t30 - VAL_data_sig_rate@ 	

VAR 	R8_lines_pels 	"R8 x 7.7 lines/mm and/or 200 x 200 pels/25.4 mm" 	
 	1

VAL 	@m_t30 - VAL_R8_lines_pels@ 	

VAR 	two_dim_coding 	"two dimensional coding" 	
 	1

VAL 	@m_t30 - VAL_two_dim_coding@ 	

VAR 	rec_width 	"recording width" 	
 	2

VAL 	@m_t30 - VAL_rec_width@ 	

VAR 	max_rec_len 	"maximum recording length" 	
 	2

VAL 	@m_t30 - VAL_max_rec_len@ 	

VAR 	min_scan_time 	"minimum scan line time" 	
 	3

VAL 	@m_t30 - VAL_min_scan_time@ 	

VAR 	uncomp_mode 	"uncompressed mode" 	
 	1

VAL 	@m_t30 - VAL_uncomp_mode@ 	

VAR 	err_corr_mode 	"error correction mode" 	
 	1

VAL 	@m_t30 - VAL_err_corr_mode@ 	

VAR 	t6_coding 	"T6 coding" 	
 	1

VAL 	@m_t30 - VAL_t6_coding@ 	

VAR 	R8_lines 	"R8 lines" 	
 	1

VAL 	@m_t30 - VAL_R8_lines@ 	

VAR 	r_300_pels 	"Res 300 x 300 pels/25.4 mm" 	
 	1

VAL 	@m_t30 - VAL_r_300_pels@ 	

VAR 	R16_lines_pels 	"R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm" 	
 	1

VAL 	@m_t30 - VAL_R16_lines_pels@ 	

VAR 	i_res_pref 	"Inch-based resolution preferred" 	
 	1

VAL 	@m_t30 - VAL_i_res_pref@ 	

VAR 	m_res_pref 	"Metric-based resolution preferred" 	
 	1

VAL 	@m_t30 - VAL_m_res_pref@ 	

VAR 	min_scan_time_hr 	"Minimum scan line time for higher resolutions" 	
 	1

VAL 	@m_t30 - VAL_min_scan_time_hr@ 	

VAR 	sel_polling 	"Selective polling" 	
 	1

VAL 	@m_t30 - VAL_sel_polling@ 	

VAR 	subaddr 	"Sub-addressing" 	
 	1

VAL 	@m_t30 - VAL_subaddr@ 	

VAR 	password 	"Password flag" 	
 	1

VAL 	@m_t30 - VAL_password@ 	

VAR 	ready_tx_doc 	"Ready to transmit a data file" 	
 	1

VAL 	@m_t30 - VAL_ready_tx_doc@ 	

VAR 	bft 	"Binary file transfer" 	
 	1

VAL 	@m_t30 - VAL_bft@ 	

VAR 	dtm 	"Document transfer mode" 	
 	1

VAL 	@m_t30 - VAL_dtm@ 	

VAR 	edi 	"Electronic data interchange" 	
 	1

VAL 	@m_t30 - VAL_edi@ 	

VAR 	btm 	"Basic transfer mode" 	
 	1

VAL 	@m_t30 - VAL_btm@ 	

VAR 	ready_tx_mixed 	"Ready to transmit a character or mixed mode document" 	
 	1

VAL 	@m_t30 - VAL_ready_tx_mixed@ 	

VAR 	char_mode 	"Character mode" 	
 	1

VAL 	@m_t30 - VAL_char_mode@ 	

VAR 	mixed_mode 	"Mixed mode" 	
 	1

VAL 	@m_t30 - VAL_mixed_mode@ 	

VAR 	proc_mode_26 	"Processable mode" 	
 	1

VAL 	@m_t30 - VAL_proc_mode_26@ 	

VAR 	dig_network_cap 	"Digital network capability" 	
 	1

VAL 	@m_t30 - VAL_dig_network_cap@ 	

VAR 	duplex 	"Duplex and half duplex capabilities" 	
 	1

VAL 	@m_t30 - VAL_duplex@ 	

VAR 	jpeg 	"JPEG coding" 	
 	1

VAL 	@m_t30 - VAL_jpeg@ 	

VAR 	full_colour 	"Full color mode" 	
 	1

VAL 	@m_t30 - VAL_full_colour@ 	

VAR 	r_12_bits_pel_comp 	"Digitise 12 Bits/pel component" 	
 	1

VAL 	@m_t30 - VAL_r_12_bits_pel_comp@ 	

VAR 	no_subsamp 	"No sub-sampling" 	
 	1

VAL 	@m_t30 - VAL_no_subsamp@ 	

VAR 	cust_illum 	"Custom illuminant" 	
 	1

VAL 	@m_t30 - VAL_cust_illum@ 	

VAR 	cust_gamut 	"Custom gamut range" 	
 	1

VAL 	@m_t30 - VAL_cust_gamut@ 	

VAR 	na_letter 	"North American Letter" 	
 	1

VAL 	@m_t30 - VAL_na_letter@ 	

VAR 	na_legal 	"North American Legal" 	
 	1

VAL 	@m_t30 - VAL_na_legal@ 	

VAR 	sing_prog_seq_coding_basic 	"Single-progression sequential Coding basic" 	
 	1

VAL 	@m_t30 - VAL_sing_prog_seq_coding_basic@ 	

VAR 	sing_prog_seq_coding_L0 	"Single-progression sequential Coding Optional L0" 	
 	1

VAL 	@m_t30 - VAL_sing_prog_seq_coding_L0@ 	

VAR 	frame_size 	"Frame size" 	
 	1

VAL 	@m_t30 - VAL_frame_size@ 	

VAR 	resolution_type 	"Resolution type selection" 	
 	1

VAL 	@m_t30 - VAL_resolution_type@ 	

VAR 	huffman_tables 	"Preferred Huffman tables" 	
 	1

VAL 	@m_t30 - VAL_huffman_tables@ 	




COMP 	cap0_rcv 	"Basic facsimile capabilities receiver"
{
 	.00000  ; reserved bits
 	 	v8 	 ; V.8
 	 	n_byte 	 ; no. of octets preferred
 	.0  ; reserved bits
 	 	ready_tx_fax 	 ; ready to transmit a facsimile document (polling)
 	 	rec_fax_op 	 ; receiver fax operation
 	 	data_sig_rate 	 ; data signalling rate
 	 	R8_lines_pels 	 ; R8 x 7.7 lines/mm and/or 200 x 200 pels/25.4 mm
 	 	two_dim_coding 	 ; two-dimensional coding
 	 	rec_width 	 ; recording-width
 	 	max_rec_len 	 ; maximum recording length
 	 	min_scan_time 	 ; minimum scan line time
}



COMP 	cap1_rcv 	"Extended facsimile capabilities 1 receiver"
{
 	.0  ; reserved bit
 	 	uncomp_mode 	 ; uncompressed mode
 	 	err_corr_mode 	 ; error correction mode
 	.000  ; reserved bits
 	 	t6_coding 	 ; T.6 coding
}



COMP 	cap2_rcv 	"Extended facsimile capabilities 2 receiver"
{
 	.0000000  ; reserved bits
}



COMP 	cap3_rcv 	"Extended facsimile capabilities 3 receiver"
{
 	 	R8_lines 	 ; R8 x 15.4 lines/mm
 	 	r_300_pels 	 ; Res 300 x 300 pels/25.4 mm
 	 	R16_lines_pels 	 ; R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm
 	 	i_res_pref 	 ; inch-based resolution preferred
 	 	m_res_pref 	 ; metric-based resolution preferred
 	 	min_scan_time_hr 	 ; minimum scan line time for higher resolutions
 	 	sel_polling 	 ; selective polling
}



COMP 	cap4_rcv 	"Extended facsimile capabilities 4 receiver"
{
 	 	subaddr 	 ; subaddressing
 	 	password 	 ; password flag
 	 	ready_tx_doc 	 ; ready to transmit a data file (polling)
 	.0  ; reserved bit
 	 	bft 	 ; Binary File Transfer (BFT)
 	 	dtm 	 ; Document Transfer Mode (DTM)
 	 	edi 	 ; Electronic Data Interchange (EDI)
}



COMP 	cap5_rcv 	"Extended facsimile capabilities 5 receiver"
{
 	 	btm 	 ; Basic Transfer Mode (BTM)
 	.0  ; reserved bit
 	 	ready_tx_mixed 	 ; ready to transmit a character or mixed mode document (polling)
 	 	char_mode 	 ; character mode
 	.0  ; reserved bit
 	 	mixed_mode 	 ; mixed mode (Annex E/T.4)
 	.0  ; reserved bit
}



COMP 	cap6_rcv 	"Extended facsimile capabilities 6 receiver"
{
 	 	proc_mode_26 	 ; processable mode 26
 	 	dig_network_cap 	 ; digital network capability
 	 	duplex 	 ; duplex and half duplex capabilities
 	 	jpeg 	 ; JPEG coding
 	 	full_colour 	 ; full colour mode
 	.0  ; reserved bit
 	 	r_12_bits_pel_comp 	 ; Digitise 12 bits/pel component
}



COMP 	cap7_rcv 	"Extended facsimile capabilities 7 receiver"
{
 	 	no_subsamp 	 ; no subsampling
 	 	cust_illum 	 ; custom illuminant
 	 	cust_gamut 	 ; custom gamut range
 	 	na_letter 	 ; North American Letter (215.9 x 279.4 mm)
 	 	na_legal 	 ; North American Legal (215.9 x 355.6 mm)
 	 	sing_prog_seq_coding_basic 	 ; single-progression sequential coding basic
 	 	sing_prog_seq_coding_L0 	 ; single-progression sequential coding optional L0
}



COMP 	cap0_snd 	"Basic facsimile capabilities sender"
{
 	.000000000  ; reserved bits
 	 	rec_fax_op 	 ; receiver fax operation
 	 	data_sig_rate 	 ; data signalling rate
 	 	R8_lines_pels 	 ; R8 x 7.7 lines/mm and/or 200 x 200 pels/25.4 mm
 	 	two_dim_coding 	 ; two-dimensional coding
 	 	rec_width 	 ; recording-width
 	 	max_rec_len 	 ; maximum recording length
 	 	min_scan_time 	 ; minimum scan line time
}



COMP 	cap1_snd 	"Extended facsimile capabilities 1 sender"
{
 	.0  ; reserved bit
 	 	uncomp_mode 	 ; uncompressed mode
 	 	err_corr_mode 	 ; error correction mode
 	 	frame_size 	 ; frame size
 	.00  ; reserved bits
 	 	t6_coding 	 ; T.6 coding
}



COMP 	cap2_snd 	"Extended facsimile capabilities 2 sender"
{
 	.0000000  ; reserved bits
}



COMP 	cap3_snd 	"Extended facsimile capabilities 3 sender"
{
 	 	R8_lines 	 ; R8 x 15.4 lines/mm
 	 	r_300_pels 	 ; Res 300 x 300 pels/25.4 mm
 	 	R16_lines_pels 	 ; R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm
 	 	resolution_type 	 ; resolution type selection
 	.000  ; reserved bits
}



COMP 	cap4_snd 	"Extended facsimile capabilities 4 sender"
{
 	 	subaddr 	 ; subaddressing
 	 	password 	 ; password flag
 	.00  ; reserved bits
 	 	bft 	 ; Binary File Transfer (BFT)
 	 	dtm 	 ; Document Transfer Mode (DTM)
 	 	edi 	 ; Electronic Data Interchange (EDI)
}



COMP 	cap5_snd 	"Extended facsimile capabilities 5 sender"
{
 	 	btm 	 ; Basic Transfer Mode (BTM)
 	.00  ; reserved bit
 	 	char_mode 	 ; character mode
 	.0  ; reserved bit
 	 	mixed_mode 	 ; mixed mode (Annex E/T.4)
 	.0  ; reserved bit
}



COMP 	cap6_snd 	"Extended facsimile capabilities 6 sender"
{
 	 	proc_mode_26 	 ; processable mode 26
 	 	dig_network_cap 	 ; digital network capability
 	 	duplex 	 ; duplex and half duplex capabilities
 	 	jpeg 	 ; JPEG coding
 	 	full_colour 	 ; full colour mode
 	 	huffman_tables 	 ; preferred Huffman tables
 	 	r_12_bits_pel_comp 	 ; Digitise 12 bits/pel component
}



COMP 	cap7_snd 	"Extended facsimile capabilities 7 sender"
{
 	 	no_subsamp 	 ; no subsampling
 	 	cust_illum 	 ; custom illuminant
 	 	cust_gamut 	 ; custom gamut range
 	 	na_letter 	 ; North American Letter (215.9 x 279.4 mm)
 	 	na_legal 	 ; North American Legal (215.9 x 355.6 mm)
 	 	sing_prog_seq_coding_basic 	 ; single-progression sequential coding basic
 	 	sing_prog_seq_coding_L0 	 ; single-progression sequential coding optional L0
}






MSG 	BCS_DIS 	both 	0b00000001 ; BCS Digital identification signal
{
 	 	fcf 	 ; Facsimile control field
 	 	cap0_rcv 	 ; basic facsimile capabilities receiver
 	! 	 	cap1_rcv 	 ; extended facsimile capabilities 1 receiver
 	! 	 	cap2_rcv 	 ; extended facsimile capabilities 2 receiver
 	! 	 	cap3_rcv 	 ; extended facsimile capabilities 3 receiver
 	! 	 	cap4_rcv 	 ; extended facsimile capabilities 4 receiver
 	! 	 	cap5_rcv 	 ; extended facsimile capabilities 5 receiver
 	! 	 	cap6_rcv 	 ; extended facsimile capabilities 6 receiver
 	# 	 	cap7_rcv 	 ; extended facsimile capabilities 7 receiver
}



MSG 	BCS_CSI 	both 	0b00000010 ; BCS Called subscriber identification
{
 	 	fcf 	 ; Facsimile control field
 	T30_IDENT  	cld_sub_nr 	[0..20] 	 ; called subscriber number
}



MSG 	BCS_NSF 	both 	0b00000100 ; BCS Non standard facilities
{
 	 	fcf 	 ; Facsimile control field
 	 	non_std_fac 	[.MAX_NSF_LEN] 	 ; Non standard facilities
}



MSG 	BCS_DTC 	both 	0b10000001 ; BCS Digital transmit command
{
 	 	fcf 	 ; Facsimile control field
 	 	cap0_rcv 	 ; basic facsimile capabilities receiver
 	! 	 	cap1_rcv 	 ; extended facsimile capabilities 1 receiver
 	! 	 	cap2_rcv 	 ; extended facsimile capabilities 2 receiver
 	! 	 	cap3_rcv 	 ; extended facsimile capabilities 3 receiver
 	! 	 	cap4_rcv 	 ; extended facsimile capabilities 4 receiver
 	! 	 	cap5_rcv 	 ; extended facsimile capabilities 5 receiver
 	! 	 	cap6_rcv 	 ; extended facsimile capabilities 6 receiver
 	# 	 	cap7_rcv 	 ; extended facsimile capabilities 7 receiver
}



MSG 	BCS_CIG 	both 	0b10000010 ; BCS Called subscriber identification
{
 	 	fcf 	 ; Facsimile control field
 	T30_IDENT  	clg_sub_nr 	[0..20] 	 ; calling subscriber number
}



MSG 	BCS_NSC 	both 	0b10000100 ; BCS Non standard facilities command
{
 	 	fcf 	 ; Facsimile control field
 	 	non_std_fac 	[.MAX_NSF_LEN] 	 ; Non standard facilities
}



MSG 	BCS_PWD_POLL 	both 	0b10000011 ; BCS password send
{
 	 	fcf 	 ; Facsimile control field
 	T30_IDENT  	pm_pword 	[0..20] 	 ; Password for polling
}



MSG 	BCS_SEP 	both 	0b10000101 ; BCS Selective polling
{
 	 	fcf 	 ; Facsimile control field
 	T30_IDENT  	pm_sub_addr 	[0..20] 	 ; Sub address
}



MSG 	BCS_DCS 	both 	0b01000001 ; BCS Digital command signal
{
 	 	fcf 	 ; Facsimile control field
 	 	cap0_snd 	 ; basic facsimile capabilities sender
 	! 	 	cap1_snd 	 ; extended facsimile capabilities 1 sender
 	! 	 	cap2_snd 	 ; extended facsimile capabilities 2 sender
 	! 	 	cap3_snd 	 ; extended facsimile capabilities 3 sender
 	! 	 	cap4_snd 	 ; extended facsimile capabilities 4 sender
 	! 	 	cap5_snd 	 ; extended facsimile capabilities 5 sender
 	! 	 	cap6_snd 	 ; extended facsimile capabilities 6 sender
 	# 	 	cap7_snd 	 ; extended facsimile capabilities 7 sender
}



MSG 	BCS_TSI 	both 	0b01000010 ; BCS Transmitting Subscriber Identification
{
 	 	fcf 	 ; Facsimile control field
 	T30_IDENT  	tra_sub_nr 	[0..20] 	 ; transmitter subscriber number
}



MSG 	BCS_NSS 	both 	0b01000100 ; BCS Non standard facilities set up
{
 	 	fcf 	 ; Facsimile control field
 	 	non_std_fac 	[.MAX_NSF_LEN] 	 ; Non standard facilities
}



MSG 	BCS_SUB 	both 	0b01000011 ; BCS Sub address
{
 	 	fcf 	 ; Facsimile control field
 	T30_IDENT  	sub_addr 	[0..20] 	 ; Sub address
}



MSG 	BCS_PWD_SND 	both 	0b01000101 ; BCS password receive
{
 	GSM3_V  	fcf 	 ; Facsimile control field
 	T30_IDENT  	sm_pword 	[0..20] 	 ; Password for sending
}



MSG 	BCS_CFR 	both 	0b00100001 ; BCS Confirmation to receive
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_FTT 	both 	0b00100010 ; BCS Failure to train
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_EOM 	both 	0b01110001 ; BCS End of message
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_MPS 	both 	0b01110010 ; BCS Multiple page signal
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_EOP 	both 	0b01110100 ; BCS End of procedure
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_PRI_EOM 	both 	0b01111001 ; BCS Procedure interrupt EOM
{
 	GSM3_V  	fcf 	 ; Facsimile control field
}



MSG 	BCS_PRI_MPS 	both 	0b01111010 ; BCS Procedure interrupt MPS
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_PRI_EOP 	both 	0b01111100 ; BCS Procedure interrupt EOP
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_MCF 	both 	0b00110001 ; BCS Message confirmation
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_RTP 	both 	0b00110011 ; BCS Retrain positive
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_RTN 	both 	0b00110010 ; BCS Retrain negative
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_PIP 	both 	0b00110101 ; BCS Procedure interrupt positive
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_PIN 	both 	0b00110100 ; BCS Procedure interrupt negative
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_DCN 	both 	0b01011111 ; BCS Disconnect
{
 	 	fcf 	 ; Facsimile control field
}



MSG 	BCS_CRP 	both 	0b01011000 ; BCS Command repeat
{
 	 	fcf 	 ; Facsimile control field
}