view cdg-hybrid/cdginc/p_ppp.val @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_ppp.val                                                      |
| SOURCE  : "sap\ppp.pdf"                                                  |
| LastModified : "2002-10-21"                                              |
| IdAndVersion : "8441.116.99.016"                                         |
| SrcFileTime  : "Thu Nov 29 09:51:00 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_PPP_VAL
#define P_PPP_VAL


#define CDG_ENTER__P_PPP_VAL

#define CDG_ENTER__FILENAME _P_PPP_VAL
#define CDG_ENTER__P_PPP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_PPP_VAL__LAST_MODIFIED _2002_10_21
#define CDG_ENTER__P_PPP_VAL__ID_AND_VERSION _8441_116_99_016

#define CDG_ENTER__P_PPP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_51_00_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_PPP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_mru
 */
#define PPP_MRU_DEFAULT                (0x5dc)    /* default value for mru          */

/*
 * Value constants for VAL_ap
 */
#define PPP_AP_NO                      (0x0)      /* no authentication              */
#define PPP_AP_PAP                     (0x1)      /* password authentication protocol */
#define PPP_AP_CHAP                    (0x2)      /* challenge handshake authentication protocol */
#define PPP_AP_AUTO                    (0x3)      /* automatic authentication       */

/*
 * Value constants for VAL_accm
 */
#define PPP_ACCM_DEFAULT               (0xffffffff)/* default value for accm         */
#define PPP_ACCM_OFF                   (0x0)      /* disable control character mapping */

/*
 * Value constants for VAL_rt
 */
#define PPP_RT_DEFAULT                 (0x3)      /* default value for restart timer */

/*
 * Value constants for VAL_mc
 */
#define PPP_MC_DEFAULT                 (0xa)      /* default value for max configure */

/*
 * Value constants for VAL_mt
 */
#define PPP_MT_DEFAULT                 (0x2)      /* default value for max terminate */

/*
 * Value constants for VAL_mf
 */
#define PPP_MF_DEFAULT                 (0x5)      /* default value for max failure  */

/*
 * Value constants for VAL_ppp_cause
 */
#define PPP_TERM_OK_MMI                (0xcf01)   /* successful terminated (MMI initiated) */
#define PPP_TERM_OK_PEER               (0xcf02)   /* successful terminated (PPP peer initiated) */
#define PPP_TERM_NO_RESPONSE           (0xcf03)   /* no response from the PPP peer  */
#define PPP_TERM_LOOP_BACK             (0xcf04)   /* looped-back link detected      */
#define PPP_TERM_LCP_NOT_CONVERGE      (0xcf05)   /* LCP configuration is not converging */
#define PPP_TERM_IPCP_NOT_CONVERGE     (0xcf06)   /* IPCP configuration is not converging */
#define PPP_TERM_IPCP_NOT_STARTED      (0xcf07)   /* PPP peer did not start IPCP configuration */
#define PPP_TERM_NO_CHANNEL            (0xcf08)   /* can not open communication channels */
#define PPP_TERM_PROT_REJ_UNEXPECTED   (0xcf09)   /* unexpected Protocol Rejection from PPP peer */
#define PPP_TERM_USE_AUTHED_FAILED     (0xcf0a)   /* user authentication failed     */
#define PPP_TERM_PROT_ERROR_UNSPEC     (0xcf0b)   /* unspecified protocol error     */

/*
 * Value constants for VAL_ppp_hc
 */
#define PPP_HC_OFF                     (0x0)      /* no header compression          */
#define PPP_HC_VJ                      (0x1)      /* Van Jacobson header compression */

/*
 * Value constants for VAL_ip
 */
#define PPP_IP_DYNAMIC                 (0x0)      /* dynaminc IP address negotiation */

/*
 * Value constants for VAL_dns1
 */
#define PPP_DNS1_DYNAMIC               (0x0)      /* dynaminc primary DNS server address negotiation */

/*
 * Value constants for VAL_dns2
 */
#define PPP_DNS2_DYNAMIC               (0x0)      /* dynaminc secondary DNS server address negotiation */

/*
 * Value constants for VAL_mode
 */
#define PPP_CLIENT                     (0x0)      /* start PPP as client            */
#define PPP_SERVER                     (0x1)      /* start PPP as server            */
#define PPP_TRANSPARENT                (0x2)      /* start PPP in transparent mode  */

/*
 * Value constants for VAL_lower_layer
 */
#define PPP_LOWER_LAYER_DOWN           (0x0)      /* lower layer is not available   */
#define PPP_LOWER_LAYER_UP             (0x1)      /* lower layer is available       */

/*
 * Value constants for VAL_connected_direction
 */
#define PPP_DTI_CONN_PEER              (0x0)      /* DTI channel is connected to Peer Layer */
#define PPP_DTI_CONN_PROT              (0x1)      /* DTI channel is connected to Protocol Layer */

/*
 * user defined constants
 */
#define PPP_LOGIN_NAME_LENGTH          (0x21)     
#define PPP_PASSWORD_LENGTH            (0x19)     
#define PPP_ORIGINATING_ENTITY         (0xf)      

#include "CDG_LEAVE.h"


#endif