view cdg-hybrid/cdginc/p_dti2.val @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti2.val                                                     |
| SOURCE  : "sap\dti2.pdf"                                                 |
| LastModified : "2001-09-19"                                              |
| IdAndVersion : "8411.111.01.002"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:38 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI2_VAL
#define P_DTI2_VAL


#define CDG_ENTER__P_DTI2_VAL

#define CDG_ENTER__FILENAME _P_DTI2_VAL
#define CDG_ENTER__P_DTI2_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI2_VAL__LAST_MODIFIED _2001_09_19
#define CDG_ENTER__P_DTI2_VAL__ID_AND_VERSION _8411_111_01_002

#define CDG_ENTER__P_DTI2_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_38_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI2_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_version
 */
#define DTI_VERSION_10                 (0x1)      /* version 1.0                    */

/*
 * Value constants for VAL_cause
 */
#define DTI_CAUSE_NORMAL_CLOSE         (0x0)      /* connection is closed by the entity */
#define DTI_CAUSE_UNEXPECTED_PRIMITIVE (0x1)      /* unexpected primitive received  */
#define DTI_CAUSE_UNSUPPORTED_VERSION  (0x2)      /* negotiated version is not supported */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_UOS                    (0x0)      /* unstructured octet stream      */

/*
 * Value constants for VAL_st_break_len
 */
#define DTI_BREAK_OFF                  (0x0)      /* No break detected              */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

#include "CDG_LEAVE.h"


#endif