view cdg-hybrid/cdginc/p_8010_142_smreg_sap.val @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_142_smreg_sap.val                                       |
| SOURCE  : "sap\8010_142_smreg_sap.pdf"                                   |
| LastModified : "2003-08-22"                                              |
| IdAndVersion : "8010.142.02.011"                                         |
| SrcFileTime  : "Thu Nov 29 09:28:36 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : SMREG
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_142_SMREG_SAP_VAL
#define P_8010_142_SMREG_SAP_VAL


#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_142_SMREG_SAP_VAL
#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__LAST_MODIFIED _2003_08_22
#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__ID_AND_VERSION _8010_142_02_011

#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_28_36_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_142_SMREG_SAP_VAL

#undef CDG_ENTER__FILENAME

#include "p_8010_152_ps_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_137_nas_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_153_cause_include.val"   /* Access values independent from the corresponding h-file. */


/*
 * Enum to value table VAL_pdp_type
 * CCDGEN:WriteEnum_Count==69
 */
#ifndef __T_SMREG_VAL_pdp_type__
#define __T_SMREG_VAL_pdp_type__
typedef enum
{
  SMREG_PDP_PPP                  = 0x1,           /* PDP type PPP                   */
  SMREG_PDP_EMPTY                = 0xf,           /* Dynamic address assignment in effect */
  SMREG_PDP_IPV4                 = 0x21,          /* IP version 4                   */
  SMREG_PDP_IPV6                 = 0x57           /* IP version 6                   */
}T_SMREG_VAL_pdp_type;
#endif

#include "CDG_LEAVE.h"


#endif