FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/cdginc/p_8010_136_simdrv_sap.val @ 268:f2e52cab0a73

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_136_simdrv_sap.val                                      |
| SOURCE  : "sap\8010_136_SIMDRV_SAP.pdf"                                  |
| LastModified : "2004-06-10"                                              |
| IdAndVersion : "8010.136.03.009"                                         |
| SrcFileTime  : "Thu Nov 29 09:27:56 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : SIMDRV
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: YES
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_136_SIMDRV_SAP_VAL
#define P_8010_136_SIMDRV_SAP_VAL


#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_136_SIMDRV_SAP_VAL
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__LAST_MODIFIED _2004_06_10
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__ID_AND_VERSION _8010_136_03_009

#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_56_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Enum to value table VAL_reset_return_val
 * CCDGEN:WriteEnum_Count==29
 */
#ifndef __T_SIMDRV_VAL_reset_return_val__
#define __T_SIMDRV_VAL_reset_return_val__
typedef enum
{
  SIMDRV_SIM_INSERTED            = 0x0,           /* A SIM is inserted and ATR/PPS was successful */
  SIMDRV_SIM_NOT_INSERTED        = 0x1,           /* No SIM inserted (hardware detected) */
  SIMDRV_INVALID_CARD            = 0x2,           /* Card is not responding or gives unintelligible answers, communications time out. */
  SIMDRV_ME_FAILURE              = 0x3,           /* Power management related problems, e.g. voltage selection */
  SIMDRV_IMPROPER_CALL_BACK      = 0x4,           /* simdrv_register function called with pointer improperly set, e.g. NULL. */
  SIMDRV_ME_READER_NOT_AVAILABLE = 0x5            /* The reader requested is not available */
}T_SIMDRV_VAL_reset_return_val;
#endif

/*
 * Enum to value table VAL_len
 * CCDGEN:WriteEnum_Count==31
 */
#ifndef __T_SIMDRV_VAL_len__
#define __T_SIMDRV_VAL_len__
typedef enum
{
  SIMDRV_VAL_LEN__RANGE_MIN      = 0x0,           /* minimum                        */
  SIMDRV_VAL_LEN__RANGE_MAX      = 0x100,         /* maximum                        */
  SIMDRV_LENGTH_UNKNOWN          = 0xffff         /* Indicating that the length expected is unknown. */
}T_SIMDRV_VAL_len;
#endif

/*
 * Enum to value table VAL_sw1_2
 * CCDGEN:WriteEnum_Count==33
 */
#ifndef __T_SIMDRV_VAL_sw1_2__
#define __T_SIMDRV_VAL_sw1_2__
typedef enum
{
  SIMDRV_ERR_NOCARD              = 0x1,           /* No SIM inserted (hardware detected) */
  SIMDRV_ERR_NOT_RESET           = 0x2,           /* A reset has not been performed on the driver with the requested Id. */
  SIMDRV_ERR_ME_FAIL             = 0x3,           /* Unrecoverable ME failure (for instance interrupt fails to occur) */
  SIMDRV_ERR_RETRY_FAIL          = 0x4,           /* ME/SIM communication failed after certain retries, SIM reset required */
  SIMDRV_ERR_PARAM_WRONG         = 0x5            /* A driver function is called with invalid parameters */
}T_SIMDRV_VAL_sw1_2;
#endif

/*
 * Enum to value table VAL_cla
 * CCDGEN:WriteEnum_Count==35
 */
#ifndef __T_SIMDRV_VAL_cla__
#define __T_SIMDRV_VAL_cla__
typedef enum
{
  SIMDRV_GSM_CLASS_BYTE          = 0xa0,          /* GSM Class byte according to [GSM 11.11 / 3GPP 51.011] */
  SIMDRV_UMTS_CLASS_BYTE         = 0x80,          /* UMTS Class byte according to [ETSI 102 221 10.1.2] */
  SIMDRV_UICC_CLASS_BYTE         = 0x0            /* UICC Class byte according to [ISO 7816-4] */
}T_SIMDRV_VAL_cla;
#endif

/*
 * Enum to value table VAL_ins
 * CCDGEN:WriteEnum_Count==37
 */
#ifndef __T_SIMDRV_VAL_ins__
#define __T_SIMDRV_VAL_ins__
typedef enum
{
  SIMDRV_INS_SELECT              = 0xa4,          /* Select Instruction             */
  SIMDRV_INS_STATUS              = 0xf2,          /* Status Instruction             */
  SIMDRV_INS_READ_BINARY         = 0xb0,          /* Read Binary Instruction        */
  SIMDRV_INS_UPDATE_BINARY       = 0xd6,          /* Update Binary Instruction      */
  SIMDRV_INS_READ_RECORD         = 0xb2,          /* Read Record Instruction        */
  SIMDRV_INS_UPDATE_RECORD       = 0xdc,          /* Update Record Instruction      */
  SIMDRV_INS_SEEK                = 0xa2,          /* Seek Instruction               */
  SIMDRV_INS_INCREASE            = 0x32,          /* Increase Instruction           */
  SIMDRV_INS_VERIFY_CHV          = 0x20,          /* Verify Chv Instruction         */
  SIMDRV_INS_CHANGE_CHV          = 0x24,          /* Change Chv Instruction         */
  SIMDRV_INS_DISABLE_CHV         = 0x26,          /* Disable Chv Instruction        */
  SIMDRV_INS_ENABLE_CHV          = 0x28,          /* Ensable Chv Instruction        */
  SIMDRV_INS_UNBLOCK_CHV         = 0x2c,          /* Unblock Chv Instruction        */
  SIMDRV_INS_INVALIDATE          = 0x4,           /* Invalidate Instruction         */
  SIMDRV_INS_REHABILITATE        = 0x44,          /* Rehabilitate Instruction       */
  SIMDRV_INS_AUTHENTICATE        = 0x88,          /* Run GSM Algorithm (2/2.5G) / Authenticate (3G) Instruction */
  SIMDRV_INS_TERMINAL_PROFILE    = 0x10,          /* Terminal Profile Instruction   */
  SIMDRV_INS_ENVELOPE            = 0xc2,          /* Envelope Instruction           */
  SIMDRV_INS_FETCH               = 0x12,          /* Fetch Instruction              */
  SIMDRV_INS_TERMINAL_RESPONSE   = 0x14,          /* Terminal Response Instruction  */
  SIMDRV_INS_GET_RESPONSE        = 0xc0           /* Get Response Instruction       */
}T_SIMDRV_VAL_ins;
#endif

/*
 * Enum to value table VAL_voltage_select
 * CCDGEN:WriteEnum_Count==39
 */
#ifndef __T_SIMDRV_VAL_voltage_select__
#define __T_SIMDRV_VAL_voltage_select__
typedef enum
{
  SIMDRV_REQ_VOLTAGE_SEL         = 0x0,           /* The SIM reader driver shall perform voltage selection */
  SIMDRV_OMIT_VOLTAGE_SEL        = 0x1            /* The SIM reader driver shall restart with the current voltage */
}T_SIMDRV_VAL_voltage_select;
#endif

/*
 * Enum to value table VAL_config_requested
 * CCDGEN:WriteEnum_Count==41
 */
#ifndef __T_SIMDRV_VAL_config_requested__
#define __T_SIMDRV_VAL_config_requested__
typedef enum
{
  SIMDRV_OMIT_CONFIG_CHARACTERISTICS = 0x0,       /* PS Shall not retrieve Configuration Characteristics */
  SIMDRV_REQUEST_CONFIG_CHARACTERISTICS = 0x1     /* PS Shall retrieve Configuration Characteristics */
}T_SIMDRV_VAL_config_requested;
#endif

/*
 * Enum to value table VAL_reader_id
 * CCDGEN:WriteEnum_Count==43
 */
#ifndef __T_SIMDRV_VAL_reader_id__
#define __T_SIMDRV_VAL_reader_id__
typedef enum
{
  SIMDRV_VAL_READER_ID__RANGE_MIN = 0x1,          /* minimum                        */
  SIMDRV_VAL_READER_ID__RANGE_MAX = 0x2           /* maximum                        */
}T_SIMDRV_VAL_reader_id;
#endif

/*
 * user defined constants
 */
#define SIMDRV_SIZE_ATR_INFO           (0x21)     
#define SIMDRV_MIN_RESULT              (0x1)      
#define SIMDRV_MAX_RESULT              (0x100)    
#define SIMDRV_MIN_DATA_SIZE           (0x1)      
#define SIMDRV_MAX_DATA_SIZE           (0xff)     
#define SIMDRV_MAX_READERS             (0x2)      

#include "CDG_LEAVE.h"


#endif