FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/m_cc.val @ 268:f2e52cab0a73
abb_inth.c: check all interrupt causes, not just one
The original code used if - else if - else if etc constructs, thus
the first detected interrupt was the only one handled. However,
Iota ITSTATREG is a clear-on-read register, thus if we only handle
the first detected interrupt and skip checking the others, then the
other interrupts will be lost, if more than one interrupt happened
to occur in one ABB interrupt handling cycle - a form of rare race
condition. Change the code to check all interrupts that were read
in this cycle.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 13 Jun 2021 18:17:53 +0000 |
| parents | 35f7a1dc9f7d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_cc.val | | SOURCE : "msg\cc.mdf" | | LastModified : "2004-01-26" | | IdAndVersion : "6147.600.97.110" | | SrcFileTime : "Wed Nov 28 10:18:32 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : M_CC * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO * CCDNAME: CC */ #ifndef M_CC_VAL #define M_CC_VAL #define CDG_ENTER__M_CC_VAL #define CDG_ENTER__FILENAME _M_CC_VAL #define CDG_ENTER__M_CC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_CC_VAL__LAST_MODIFIED _2004_01_26 #define CDG_ENTER__M_CC_VAL__ID_AND_VERSION _6147_600_97_110 #define CDG_ENTER__M_CC_VAL__SRC_FILE_TIME _Wed_Nov_28_10_18_32_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__M_CC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_access_ident */ #define M_CC_VAL_ACCESS_IDENT___DEF (0x0) /* reserved */ #define M_CC_AI_OCT_ID (0x0) /* octet identifier */ /* * Value constants for VAL_state */ #define M_CC_VAL_STATE___DEF (0x0) /* reserved */ #define M_CC_CS_0 (0x0) /* null */ #define M_CC_CS_01 (0x2) /* MM connection pending */ #define M_CC_CS_03 (0x23) /* Wait for network information */ #define M_CC_CS_05 (0x25) /* CC-Establishment confirmed */ #define M_CC_CS_06 (0x26) /* Recall present */ #define M_CC_CS_1 (0x1) /* call initiated */ #define M_CC_CS_3 (0x3) /* mobile originating call proceeding */ #define M_CC_CS_4 (0x4) /* call delivered */ #define M_CC_CS_6 (0x6) /* call present */ #define M_CC_CS_7 (0x7) /* call received */ #define M_CC_CS_8 (0x8) /* connect request */ #define M_CC_CS_9 (0x9) /* mobile terminating call confirmed */ #define M_CC_CS_10 (0xa) /* active */ #define M_CC_CS_11 (0xb) /* disconnect request */ #define M_CC_CS_12 (0xc) /* disconnect indication */ #define M_CC_CS_19 (0x13) /* release request */ #define M_CC_CS_26 (0x1a) /* mobile originating modify */ #define M_CC_CS_27 (0x1b) /* mobile terminating modify */ #define M_CC_CS_28 (0x1c) /* connect indication */ /* * Value constants for VAL_cause */ #define M_CC_CAUSE_UNASSIGN (0x1) /* Unassigned (unallocated) Note 9 number */ #define M_CC_CAUSE_NO_ROUTE (0x3) /* No route to destination */ #define M_CC_CAUSE_CHAN_UNACCEPT (0x6) /* Channel unacceptable */ #define M_CC_CAUSE_BARRED (0x8) /* Operator determined barring */ #define M_CC_CAUSE_CALL_CLEAR (0x10) /* Normal call clearing */ #define M_CC_CAUSE_USER_BUSY (0x11) /* User busy */ #define M_CC_CAUSE_NO_RESPONSE (0x12) /* No user responding */ #define M_CC_CAUSE_ALERT_NO_ANSWER (0x13) /* User alerting, no answer */ #define M_CC_CAUSE_CALL_REJECT (0x15) /* Call rejected */ #define M_CC_CAUSE_NUM_CHANGED (0x16) /* Number changed */ #define M_CC_CAUSE_PREEMPTION (0x19) /* Pre-emption */ #define M_CC_CAUSE_USER_CLEAR (0x1a) /* Non selected user clearing */ #define M_CC_CAUSE_DEST_ORDER (0x1b) /* Destination out of order */ #define M_CC_CAUSE_NUM_FORMAT (0x1c) /* Invalid number format (incomplete number) */ #define M_CC_CAUSE_FACILITY_REJECT (0x1d) /* Facility rejected */ #define M_CC_CAUSE_STATUS_ENQUIRY (0x1e) /* Response to STATUS ENQUIRY */ #define M_CC_CAUSE_UNSPECIFIED (0x1f) /* Normal, unspecified */ #define M_CC_CAUSE_NO_CHAN_AVAIL (0x22) /* No circuit/channel available */ #define M_CC_CAUSE_NETWORK_ORDER (0x26) /* Network out of order */ #define M_CC_CAUSE_TEMP_FAIL (0x29) /* Temporary failure */ #define M_CC_CAUSE_SWITCH_CONGEST (0x2a) /* Switching equipment congestion */ #define M_CC_CAUSE_INFO_DISCARD (0x2b) /* Access information discarded */ #define M_CC_CAUSE_REQ_CHAN_UNAVAIL (0x2c) /* requested circuit/channel not available */ #define M_CC_CAUSE_RESOURCE_UNAVAIL (0x2f) /* Resources unavailable, unspecified */ #define M_CC_CAUSE_QOS_UNAVAIL (0x31) /* Quality of service unavailable */ #define M_CC_CAUSE_FACILITY_UNSUBSCRIB (0x32) /* Requested facility not subscribed */ #define M_CC_CAUSE_BARRED_IN_CUG (0x37) /* Incoming calls barred within the CUG */ #define M_CC_CAUSE_BEARER_CAP_AUTHORIZ (0x39) /* Bearer capability not authorized */ #define M_CC_CAUSE_BEARER_CAP_UNAVAIL (0x3a) /* Bearer capability not presently available */ #define M_CC_CAUSE_SERVICE_UNAVAIL (0x3f) /* Service or option not available, unspecified */ #define M_CC_CAUSE_BEARER_NOT_IMPLEM (0x41) /* Bearer service not implemented */ #define M_CC_CAUSE_ACM_MAX (0x44) /* ACM equal to or greater than ACMmax */ #define M_CC_CAUSE_FACILITY_NOT_IMPLEM (0x45) /* Requested facility not implemented */ #define M_CC_CAUSE_RESTICT_BEARER_CAP (0x46) /* Only restricted digital information bearer capability is available */ #define M_CC_CAUSE_SERVICE_NOT_IMPLEM (0x4f) /* Service or option not implemented, unspecified */ #define M_CC_CAUSE_INVALID_TI (0x51) /* Invalid transaction identifier value */ #define M_CC_CAUSE_USER_NOT_IN_CUG (0x57) /* User not member of CUG */ #define M_CC_CAUSE_INCOMPAT_DEST (0x58) /* Incompatible destination */ #define M_CC_CAUSE_INVALID_TRANS_NET (0x5b) /* Invalid transit network selection */ #define M_CC_CAUSE_INCORRECT_MESSAGE (0x5f) /* Semantically incorrect message */ #define M_CC_CAUSE_INVALID_MAND_INFO (0x60) /* Invalid mandatory information */ #define M_CC_CAUSE_MESSAGE_TYPE_NOT_IMPLEM (0x61) /* Message type non-existent or not implemented */ #define M_CC_CAUSE_MESSAGE_TYPE_INCOMPAT (0x62) /* Message type not compatible with protocol state */ #define M_CC_CAUSE_INFO_ELEM_NOT_IMPLEM (0x63) /* Information element nonistent or not implemented */ #define M_CC_CAUSE_COND_INFO_ELEM (0x64) /* Conditional IE error */ #define M_CC_CAUSE_MESSAGE_INCOMPAT (0x65) /* Message not compatible with protocol state */ #define M_CC_CAUSE_TIMER (0x66) /* Recovery on timer expiry */ #define M_CC_CAUSE_PROTOCOL (0x6f) /* Protocol error, unspecified */ #define M_CC_CAUSE_INTERWORKING (0x7f) /* Interworking, unspecified */ /* * Value constants for VAL_code */ #define M_CC_VAL_CODE___DEF (0x0) /* reserved */ #define M_CC_CSTD_GSM (0x0) /* GSM standardized coding */ /* * Value constants for VAL_cs */ #define M_CC_CS_Q931 (0x0) /* standardized coding as described in CCITT Rec. Q.931 */ #define M_CC_CS_INTERNATIONAL (0x1) /* reserved for other international standards */ #define M_CC_CS_NATIONAL (0x2) /* national standard */ #define M_CC_CS_GSM_PLMN (0x3) /* standard defined for the GSM PLMNS as described in 10.86/GSM 04.08 */ /* * Value constants for VAL_compress */ #define M_CC_COMP_NO (0x0) /* data compression not possible */ #define M_CC_COMP_YES (0x1) /* data compression possible */ /* * Value constants for VAL_config */ #define M_CC_VAL_CONFIG___DEF (0x0) /* reserved */ #define M_CC_CONF_POINT_TO_POINT (0x0) /* point-to-point */ /* * Value constants for VAL_congest_lev */ #define M_CC_VAL_CONGEST_LEV___DEF (0x0) /* reserved */ #define M_CC_CL_RECEIVER_READY (0x0) /* receiver ready */ #define M_CC_CL_RECEIVER_NOT_READY (0xf) /* receiver not ready */ /* * Value constants for VAL_conn_elem */ #define M_CC_CE_TRANSPA (0x0) /* transparent */ #define M_CC_CE_RLP (0x1) /* non transparent (RLP) */ #define M_CC_CE_TRANSPA_PREF (0x2) /* both, transparent preferred */ #define M_CC_CE_RLP_PREF (0x3) /* both, non transparent preferred */ /* * Value constants for VAL_dtmf */ #define M_CC_DTMF_EARLY (0x0) /* Reserved for earlier versions of the protocol. */ #define M_CC_DTMF_CURRENT (0x1) /* The mobile station supports DTMF as specified in section 5.5.7 of GSM 4.08. */ /* * Value constants for VAL_duplex */ #define M_CC_DUPLEX_HALF (0x0) /* half duplex */ #define M_CC_DUPLEX_FULL (0x1) /* full duplex */ /* * Value constants for VAL_establish */ #define M_CC_VAL_ESTABLISH___DEF (0x0) /* reserved */ #define M_CC_ESTAB_DEMAND (0x0) /* demand */ /* * Value constants for VAL_hold */ #define M_CC_HLD_IDLE (0x0) #define M_CC_HLD_HOLD_REQ (0x1) #define M_CC_HLD_CALL_HELD (0x2) #define M_CC_HLD_RETRIEVE_REQ (0x3) /* * Value constants for VAL_trans_cap */ #define M_CC_VAL_TRANS_CAP___DEF (0x0) /* reserved */ #define M_CC_ITC_SPEECH (0x0) /* speech */ #define M_CC_ITC_DIGITAL_UNRESTRICTED (0x1) /* unrestricted digital information */ #define M_CC_ITC_AUDIO (0x2) /* audio 3.1 kHz, ex PLMN */ #define M_CC_ITC_FAX_GROUP_3 (0x3) /* fascimile group 3 */ #define M_CC_ITC_OTHER (0x5) /* Other ITC (See octet 5a) */ #define M_CC_ITC_AUXILIARY_SPEECH (0x6) /* Auxiliary speech */ #define M_CC_ITC_NETWORK_RESERVED (0x7) /* reserved, to be used in the network. */ /* * Value constants for VAL_intermed_rate */ #define M_CC_VAL_INTERMED_RATE___DEF (0x0) /* reserved */ #define M_CC_IR_8_KBIT (0x2) /* 8 kbit/s */ #define M_CC_IR_16_KBIT (0x3) /* 16 kbit/s */ /* * Value constants for VAL_l1_ident */ #define M_CC_VAL_L1_IDENT___DEF (0x0) /* reserved */ #define M_CC_L1_OCT_ID (0x1) /* octet identifier */ /* * Value constants for VAL_l2_ident */ #define M_CC_VAL_L2_IDENT___DEF (0x0) /* reserved */ #define M_CC_L2_OCT_ID (0x2) /* octet identifier */ /* * Value constants for VAL_loc */ #define M_CC_VAL_LOC___DEF (0x0) /* reserved */ #define M_CC_LOC_USER (0x0) /* user */ #define M_CC_LOC_PRIV_NET_LOCAL_USER (0x1) /* private network serving the local user */ #define M_CC_LOC_PUB_NET_LOCAL_USER (0x2) /* public network serving the local user */ #define M_CC_LOC_TRANSIT_NET (0x3) /* transit network */ #define M_CC_LOC_PUB_NET_REMOTE_USER (0x4) /* public network serving the remote user */ #define M_CC_LOC_PRIV_NET_REMOTE_USER (0x5) /* private network serving the remote user */ #define M_CC_LOC_INTERNATIONAL_NET (0x7) /* international network */ #define M_CC_LOC_BEYOND_POINT (0xa) /* network beyond interworking point */ /* * Value constants for VAL_modem_type */ #define M_CC_VAL_MODEM_TYPE___DEF (0x0) /* reserved */ #define M_CC_MT_NONE (0x0) /* none */ #define M_CC_MT_V21 (0x1) /* V.21 */ #define M_CC_MT_V22 (0x2) /* V.22 */ #define M_CC_MT_V22BIS (0x3) /* V.22 bis */ #define M_CC_MT_V23 (0x4) /* V.23, (GSM R97 only) */ #define M_CC_MT_V26TER (0x5) /* V.26 ter */ #define M_CC_MT_V32 (0x6) /* V.32 */ #define M_CC_MT_UNDEF (0x7) /* modem for undefined interface */ #define M_CC_MT_AUTO (0x8) /* autobauding type 1 */ /* * Value constants for VAL_mpty */ #define M_CC_MPTY_IDLE (0x0) #define M_CC_MPTY_REQ (0x1) #define M_CC_MPTY_CALL (0x2) #define M_CC_MPTY_SPLIT (0x3) /* * Value constants for VAL_negotiate */ #define M_CC_VAL_NEGOTIATE___DEF (0x0) /* reserved */ #define M_CC_NEGOTIATE_NO (0x0) /* in-band negotiation not possible */ /* * Value constants for VAL_nirr */ #define M_CC_NIRR_NO_MEANING (0x0) /* No meaning is associated with this value. */ #define M_CC_NIRR_DATA (0x1) /* Data up to and including 4.8 kb/s, full rate, non-transparent, 6 kb/s radio interface rate is requested. */ /* * Value constants for VAL_nic_rx */ #define M_CC_NIC_RX_NO (0x0) /* cannot accept data with network independent clock (i.e. sender does not support this optional procedure) */ #define M_CC_NIC_RX_YES (0x1) /* can accept data with network independent clock (i.e. sender does support this optional procedure) */ /* * Value constants for VAL_nic_tx */ #define M_CC_NIC_TX_NO (0x0) /* does not require to send data with network independent clock */ #define M_CC_NIC_TX_YES (0x1) /* requires to send data with network independent clock */ /* * Value constants for VAL_nd */ #define M_CC_VAL_ND___DEF (0x0) /* reserved */ #define M_CC_ND_USER_SUSPEND (0x0) #define M_CC_ND_USED_RESUME (0x1) #define M_CC_ND_BEARER_CHANGE (0x2) /* * Value constants for VAL_npi */ #define M_CC_VAL_NPI___DEF (0x0) /* reserved */ #define M_CC_NPI_UNKNOWN (0x0) /* unknown */ #define M_CC_NPI_ISDN (0x1) /* ISDN/telephony numbering plan (Rec. E.164/E.163) */ #define M_CC_NPI_X121 (0x3) /* data numbering plan (Recommendation X.121) */ #define M_CC_NPI_F69 (0x4) /* telex numbering plan (Recommendation F.69) */ #define M_CC_NPI_NATIONAL (0x8) /* national numbering plan */ #define M_CC_NPI_PRIVATE (0x9) /* private numbering plan */ #define M_CC_NPI_CTS (0xb) /* Reserved for CTS */ #define M_CC_NPI_EXTENSTION (0xf) /* reserved for extension */ /* * Value constants for VAL_num_data */ #define M_CC_NDATA_7 (0x0) /* 7 bits */ #define M_CC_NDATA_8 (0x1) /* 8 bits (this value is also used in the case of bit oriented protocols) */ /* * Value constants for VAL_num_stop */ #define M_CC_NSTOP_1 (0x0) /* 1 bit (This value is also used in the case of synchronous mode) */ #define M_CC_NSTOP_2 (0x1) /* 2 bits */ /* * Value constants for VAL_odd_even */ #define M_CC_OE_EVEN (0x0) /* even number of address signals */ #define M_CC_OE_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_parity */ #define M_CC_VAL_PARITY___DEF (0x0) /* reserved */ #define M_CC_PARITY_ODD (0x0) /* odd */ #define M_CC_PARITY_EVEN (0x2) /* even */ #define M_CC_PARITY_NONE (0x3) /* none */ #define M_CC_PARITY_0 (0x4) /* forced to 0 */ #define M_CC_PARITY_1 (0x5) /* forced to 1 */ /* * Value constants for VAL_present */ #define M_CC_VAL_PRESENT___DEF (0x0) /* reserved */ #define M_CC_PRES_ALLOWED (0x0) /* Presentation allowed */ #define M_CC_PRES_RESTRICTED (0x1) /* Presentation restricted */ #define M_CC_PRES_NOT_AVAIL (0x2) /* Number not available due to interworking */ /* * Value constants for VAL_progress_desc */ #define M_CC_VAL_PROGRESS_DESC___DEF (0x0) /* Unspecific */ #define M_CC_PROG_NO_END_TO_END_PLMN (0x1) /* Call is not end-to-end PLMN/ISDN, further call progress information may be available in-band */ #define M_CC_PROG_DEST_NON_PLMN (0x2) /* Destination address in non-PLMN/ISDN */ #define M_CC_PROG_ORIGIN_NON_PLMN (0x3) /* Origination address in non-PLMN/ISDN */ #define M_CC_PROG_RETURN_TO_PLMN (0x4) /* Call has returned to the PLMN/ISDN */ #define M_CC_PROG_INBAND_AVAIL (0x8) /* In-band information or appropriate pattern now available */ #define M_CC_PROG_END_TO_END_PLMN (0x20) /* Call is end-to-end PLMN/ISDN */ #define M_CC_PROG_QUEUEING (0x40) /* Queueing */ /* * Value constants for VAL_rad_chan_req */ #define M_CC_VAL_RAD_CHAN_REQ___DEF (0x0) /* reserved */ #define M_CC_RCR_FULL_ONLY (0x1) /* full rate support only mobile station */ #define M_CC_RCR_HALF_PREF (0x2) /* dual rate support mobile station/half rate preferred */ #define M_CC_RCR_FULL_PREF (0x3) /* dual rate support mobile station/full rate preferred */ /* * Value constants for VAL_rate_adapt */ #define M_CC_RA_NONE (0x0) /* no rate adaption */ #define M_CC_RA_V110 (0x1) /* V.110/X.30 rate adaption */ #define M_CC_RA_X31 (0x2) /* CCITT X.31 flag stuffing */ #define M_CC_RA_OTHER (0x3) /* Other rate adaption */ /* * Value constants for VAL_repeat */ #define M_CC_VAL_REPEAT___DEF (0x0) /* Reserved */ #define M_CC_REPEAT_CIRCULAR (0x1) /* Circular for successive selection 'mode 1 alternate mode 2' */ #define M_CC_REPEAT_FALLBACK (0x2) /* Support of fallback - mode 1 preferred, mode 2 if setup of mode 1 fails */ #define M_CC_REPEAT_SEQUENTIAL (0x3) /* Sequential for successive selection 'mode 1 and then mode 2' (GSM R97 only) */ /* * Value constants for VAL_screen */ #define M_CC_SCR_USER_UNSCREENED (0x0) /* User-provided, not screened */ #define M_CC_SCR_USER_PASSED (0x1) /* User-provided, verified and passed */ #define M_CC_SCR_USER_FAILED (0x2) /* User-provided, verified and failed */ #define M_CC_SCR_NETWORD (0x3) /* Network provided */ /* * Value constants for VAL_signal */ #define M_CC_VAL_SIGNAL___DEF (0x0) /* reserved */ #define M_CC_SIGNAL_DIAL_ON (0x0) /* dial tone on */ #define M_CC_SIGNAL_BACK_ON (0x1) /* ring back tone on */ #define M_CC_SIGNAL_INTERCEPT_ON (0x2) /* intercept tone on */ #define M_CC_SIGNAL_CONGEST_ON (0x3) /* network congestion tone on */ #define M_CC_SIGNAL_BUSY_ON (0x4) /* busy tone on */ #define M_CC_SIGNAL_CONFIRM_ON (0x5) /* confirm tone on */ #define M_CC_SIGNAL_ANSWER_ON (0x6) /* answer tone on */ #define M_CC_SIGNAL_WAITING_ON (0x7) /* call waiting tone on */ #define M_CC_SIGNAL_HOOK_OFF_ON (0x8) /* off-hook warning tone on */ #define M_CC_SIGNAL_TONES_OFF (0x3f) /* tones off */ #define M_CC_SIGNAL_ALERT_OFF (0x4f) /* alerting off */ /* * Value constants for VAL_sig_access_prot */ #define M_CC_VAL_SIG_ACCESS_PROT___DEF (0x0) /* reserved */ #define M_CC_SIAP_I440 (0x1) /* I.440/450 */ #define M_CC_SIAP_X28_INDIV_NUI (0x3) /* X.28 - dedicated PAD, individual NUI (GSM R97 only) */ #define M_CC_SIAP_X28_UNIV_NUI (0x4) /* X.28 - dedicated PAD, universal NUI (GSM R97 only) */ #define M_CC_SIAP_X28_NON_DEDIC (0x5) /* X.28 - non dedicated PAD (GSM R97 only) */ #define M_CC_SIAP_X32 (0x6) /* X.32 */ /* * Value constants for VAL_structure */ #define M_CC_VAL_STRUCTURE___DEF (0x0) /* reserved */ #define M_CC_STRC_SERV_DATA_INTEG (0x0) /* service data unit integrity */ #define M_CC_STRC_UNSTRUCTURED (0x3) /* unstructured */ /* * Value constants for VAL_sync_async */ #define M_CC_SYNCHRONOUS (0x0) /* synchronous */ #define M_CC_ASYNCHRONOUS (0x1) /* asynchronous */ /* * Value constants for VAL_trans_mode */ #define M_CC_TM_CIRCUIT (0x0) /* circuit mode */ #define M_CC_TM_PACKET (0x1) /* packet mode */ /* * Value constants for VAL_ton */ #define M_CC_VAL_TON___DEF (0x0) /* reserved */ #define M_CC_TON_UNKNOWN (0x0) /* unknown */ #define M_CC_TON_INTERNATIONAL (0x1) /* international number */ #define M_CC_TON_NATIONAL (0x2) /* national number */ #define M_CC_TON_NETWORK (0x3) /* network specific number */ #define M_CC_TON_DEDICATED (0x4) /* dedicated access, short code */ #define M_CC_TON_EXTENSION (0x7) /* reserved for extention */ /* * Value constants for VAL_tos */ #define M_CC_VAL_TOS___DEF (0x0) /* reserved */ #define M_CC_TOS_NSAP (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define M_CC_TOS_USER (0x2) /* User specified */ /* * Value constants for VAL_user_inf_l1_prot */ #define M_CC_VAL_USER_INF_L1_PROT___DEF (0x0) /* reserved */ #define M_CC_L1_DEFAULT (0x0) /* default layer 1 protocol */ /* * Value constants for VAL_user_inf_l2_prot */ #define M_CC_VAL_USER_INF_L2_PROT___DEF (0x0) /* reserved */ #define M_CC_L2_X25 (0x6) /* recommendation X.25, link level */ #define M_CC_L2_ISO6429 (0x8) /* ISO 6429, codeset 0 (DC1/DC3) */ #define M_CC_L2_VIDEOTEX (0xa) /* videotex profile 1 */ #define M_CC_L2_COPFC (0xc) /* COPnoFlCt (Character oriented Protocol with no Flow Control mechanism) */ #define M_CC_L2_X75 (0xd) /* X.75 layer 2 modified (CAPI) */ /* * Value constants for VAL_user_rate */ #define M_CC_VAL_USER_RATE___DEF (0x0) /* reserved */ #define M_CC_UR_0_3_KBIT (0x1) /* rate : 0.3 kbit/s Recommendation X.1 and V.110 */ #define M_CC_UR_1_2_KBIT (0x2) /* rate : 1.2 kbit/s Recommendation X.1 and V.110 */ #define M_CC_UR_2_4_KBIT (0x3) /* rate : 2.4 kbit/s Recommendation X.1 and V.110 */ #define M_CC_UR_4_8_KBIT (0x4) /* rate : 4.8 kbit/s Recommendation X.1 and V.110 */ #define M_CC_UR_9_6_KBIT (0x5) /* rate : 9.6 kbit/s Recommendation X.1 and V.110 */ #define M_CC_UR_12_0_KBIT_TRANS (0x6) /* rate : 12.0 kbit/s transparent */ #define M_CC_UR_1_2_KBIT_V23 (0x7) /* rate: 1.2 kbit/s, 75bit/s V.23, X.1, V.110 (GSM R97 only) */ /* * Value constants for VAL_pd */ #define M_CC_VAL_PD___DEF (0x0) /* reserved */ #define M_CC_PD_USER (0x0) /* User specific protocol */ #define M_CC_PD_HIGH_LAYER (0x1) /* OSI high layer protocols */ #define M_CC_PD_X244 (0x2) /* X.244 */ #define M_CC_PD_SYS_MANAGE (0x3) /* Reserved for system management convergence function */ #define M_CC_PD_IA5 (0x4) /* IA5 characters */ #define M_CC_PD_V120 (0x7) /* Rec.V.120 rate adaption */ #define M_CC_PD_Q931 (0x8) /* Q.931 (I.451) user-network call control messages */ /* * Value constants for VAL_speech_vers1 */ #define M_CC_SPEECH_VERS_FR (0x0) /* full rate speech version 1 */ #define M_CC_SPEECH_VERS_HR (0x1) /* half rate speech version 1 */ #define M_CC_SPEECH_VERS_EFR (0x2) /* full rate speech version 2 (enhanced full rate) */ #define M_CC_SPEECH_VERS_AMR_HR (0x5) /* half rate speech version 3 (AHS) */ #define M_CC_SPEECH_VERS_AMR_FR (0x4) /* full rate speech version 3 (AFS) */ #define M_CC_SPEECH_VERS_NONE (0xf) /* no speech version given */ /* * Value constants for VAL_modem_type_2 */ #define M_CC_OTHER_MODEM_TYPE_NONE (0x0) /* No other modem type specified */ #define M_CC_OTHER_MODEM_TYPE_V32BIS (0x1) /* V.32bis (GSM R97 only) */ #define M_CC_OTHER_MODEM_TYPE_V34 (0x2) /* V.34 */ /* * Value constants for VAL_fnur */ #define M_CC_FNUR_NOT_APPLICABLE (0x0) /* Fixed network user rate not applicable */ #define M_CC_FNUR_9600 (0x1) /* FNUR 9.6 kbit/s */ #define M_CC_FNUR_14400 (0x2) /* FNUR 14.4 kbit/s */ #define M_CC_FNUR_19200 (0x3) /* FNUR 19.2 kbit/s */ #define M_CC_FNUR_28800 (0x4) /* FNUR 28.8 kbit/s */ #define M_CC_FNUR_38400 (0x5) /* FNUR 38.4 kbit/s */ #define M_CC_FNUR_48000 (0x6) /* FNUR 48.0 kbit/s */ #define M_CC_FNUR_56000 (0x7) /* FNUR 56.0 kbit/s */ #define M_CC_FNUR_64000 (0x8) /* FNUR 64.0 kbit/s */ #define M_CC_FNUR_33600 (0x9) /* FNUR 33.6 kbit/s - bit transparent (UMTS only) */ #define M_CC_FNUR_32000 (0xa) /* FNUR 32.0 kbit/s - I.460 */ #define M_CC_FNUR_31200 (0xb) /* FNUR 31.2 kbit/s - V.34 (UMTS and 3,1 khz only) */ /* * Value constants for VAL_acc */ #define M_CC_ACC_EMPTY (0x0) /* No channel codings acceptable */ #define M_CC_ACC_48 (0x1) /* TCH 4.8 acceptable */ #define M_CC_ACC_96 (0x2) /* TCH 9.6 acceptable */ #define M_CC_ACC_144 (0x8) /* TCH 14.4 acceptable */ #define M_CC_ACC_ALL (0xb) /* All channel codings acceptable */ // VALTAB-FF: REL99 // // Value constants for VAL_acc_ext_288 // // VAL-FF: REL99 // #define M_CC_acc_ext_288_not_ok (0x0) /* TCH/28.8 not acceptable */ // VAL-FF: REL99 // #define M_CC_acc_ext_288_ok (0x1) /* TCH/28.8 acceptable */ // VALTAB-FF: REL99 // // Value constants for VAL_acc_ext_320 // // VAL-FF: REL99 // #define M_CC_acc_ext_320_not_ok (0x0) /* TCH/32.0 not acceptable */ // VAL-FF: REL99 // #define M_CC_acc_ext_320_ok (0x1) /* TCH/32.0 acceptable */ // VALTAB-FF: REL99 // // Value constants for VAL_acc_ext_432 // // VAL-FF: REL99 // #define M_CC_acc_ext_432_not_ok (0x0) /* TCH/43.2 not acceptable */ // VAL-FF: REL99 // #define M_CC_acc_ext_432_ok (0x1) /* TCH/43.2 acceptable */ // VALTAB-FF: REL99 // // Value constants for VAL_ch_cod_asym // // VAL-FF: REL99 // #define M_CC_CH_COD_SYM_PREF (0x0) /* Channel coding symmetry preferred */ // VAL-FF: REL99 // #define M_CC_CH_COD_DL_BIAS (0x1) /* Downlink biased channel coding asymmetry preferred */ // VAL-FF: REL99 // #define M_CC_CH_COD_UL_BIAS (0x2) /* Uplink biased channel coding asymmetry preferred */ // VAL-FF: REL99 // #define M_CC_CH_COD_SYM_PREFX (0x3) /* Unused, interpret as Channel coding symmetry preferred */ /* * Value constants for VAL_mTch */ #define M_CC_MAX_TCH_1 (0x0) /* Maximum of 1 TCH */ #define M_CC_MAX_TCH_2 (0x1) /* Maximum of 2 TCH */ #define M_CC_MAX_TCH_3 (0x2) /* Maximum of 3 TCH */ #define M_CC_MAX_TCH_4 (0x3) /* Maximum of 4 TCH */ #define M_CC_MAX_TCH_5 (0x4) /* Maximum of 5 TCH */ #define M_CC_MAX_TCH_6 (0x5) /* Maximum of 6 TCH */ #define M_CC_MAX_TCH_7 (0x6) /* Maximum of 7 TCH */ #define M_CC_MAX_TCH_8 (0x7) /* Maximum of 8 TCH */ /* * Value constants for VAL_uimi */ #define M_CC_UIMI_NOT_ALLOWED (0x0) /* User initiated modification not allowed/required */ #define M_CC_UIMI_MAX_1_TCH (0x1) /* User initiated modification up to 1 TCH/F */ #define M_CC_UIMI_MAX_2_TCH (0x2) /* User initiated modification up to 2 TCH/F */ #define M_CC_UIMI_MAX_3_TCH (0x3) /* User initiated modification up to 3 TCH/F */ #define M_CC_UIMI_MAX_4_TCH (0x4) /* User initiated modification up to 4 TCH/F */ /* * Value constants for VAL_waiur */ #define M_CC_VAL_WAIUR___DEF (0x0) /* Reserved */ #define M_CC_WAIUR_NOT_APPLICABLE (0x0) /* Wanted Air Interface user rate not applicable */ #define M_CC_WAIUR_9600 (0x1) /* WAIUR 9.6 kbit/s */ #define M_CC_WAIUR_14400 (0x2) /* WAIUR 14.4 kbit/s */ #define M_CC_WAIUR_19200 (0x3) /* WAIUR 19.2 kbit/s */ #define M_CC_WAIUR_28800 (0x5) /* WAIUR 28.8 kbit/s */ #define M_CC_WAIUR_38400 (0x6) /* WAIUR 38.4 kbit/s */ #define M_CC_WAIUR_43200 (0x7) /* WAIUR 43.2 kbit/s */ #define M_CC_WAIUR_57600 (0x8) /* WAIUR 57.6 kbit/s */ #define M_CC_WAIUR_38400_INT_1 (0x9) /* Interpreted as 38.4 kbps by the network */ #define M_CC_WAIUR_38400_INT_2 (0xa) /* Interpreted as 38.4 kbps by the network */ #define M_CC_WAIUR_38400_INT_3 (0xb) /* Interpreted as 38.4 kbps by the network */ #define M_CC_WAIUR_38400_INT_4 (0xc) /* Interpreted as 38.4 kbps by the network */ /* * Value constants for VAL_ccbs_act */ #define M_CC_CCBS_NO (0x0) /* CCBS is not possible */ #define M_CC_CCBS_YES (0x1) /* CCBS is possible */ /* * Value constants for VAL_pcp */ #define M_CC_PCP_NO (0x0) /* Mobile does not support prolonged clearing procedure */ #define M_CC_PCP_YES (0x1) /* Mobile supports prolonged clearing procedure */ /* * Value constants for VAL_rcl_type */ #define M_CC_CCBS (0x0) /* CCBS */ #define M_CC_CCBS_1 (0x1) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define M_CC_CCBS_2 (0x2) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define M_CC_CCBS_3 (0x3) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define M_CC_CCBS_4 (0x4) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define M_CC_CCBS_5 (0x5) /* Shall be treated as CCBS (intended for other similar types of Recall) */ #define M_CC_CCBS_6 (0x6) /* Shall be treated as CCBS (intended for other similar types of Recall) */ /* * Value constants for VAL_coding_bc3x1 */ #define M_CC_CODING_BC3X_SPEECH (0x0) /* Octet 3x of IE Bearer Capabilities indicates speech codec version */ #define M_CC_CODING_BC3X_OTHER (0x1) /* Octet 3x of IE Bearer Capabilities used for other extension of octet 3 */ /* * Value constants for VAL_ctm */ #define M_CC_CTM_NO (0x0) /* Mobile does not support prolonged clearing procedure */ #define M_CC_CTM_YES (0x1) /* Mobile supports prolonged clearing procedure */ // VALTAB-FF: REL99 // // Value constants for VAL_other_itc // // #define M_CC_VAL_OTHER_ITC___DEF (0x0) /* Reserved */ // VAL-FF: REL99 // #define M_CC_ITC_DIGITAL_RESTRICTED (0x0) /* Restricted digital information */ // VALTAB-FF: REL99 // // Value constants for VAL_other_ra // // #define M_CC_VAL_OTHER_RA___DEF (0x0) /* Reserved */ // VAL-FF: REL99 // #define M_CC_RA_V120 (0x0) /* V.120 */ // VAL-FF: REL99 // #define M_CC_RA_H223_H245 (0x1) /* H.223 and H.245 */ // VAL-FF: REL99 // #define M_CC_RA_PIAFS (0x2) /* PIAFS */ // VALTAB-FF: REL99 // // Value constants for VAL_ra_header // // VAL-FF: REL99 // #define M_CC_RA_NO_HEADER (0x0) /* Rate adaption header not included */ // VAL-FF: REL99 // #define M_CC_RA_HEADER_INCLUDED (0x1) /* Rate adaption header included */ // VALTAB-FF: REL99 // // Value constants for VAL_multiple_frame // // VAL-FF: REL99 // #define M_CC_MULTIPLE_FRAME_NO (0x0) /* Multiple frame establishment not supported, only UI frames allowed */ // VAL-FF: REL99 // #define M_CC_MULTIPLE_FRAME_YES (0x1) /* Multiple frame establishment supported */ // VALTAB-FF: REL99 // // Value constants for VAL_mode_of_operation // // VAL-FF: REL99 // #define M_CC_BIT_TRANSPARENT (0x0) /* Bit transparent mode of operation */ // VAL-FF: REL99 // #define M_CC_PROTOCOL_SENSITIVE (0x1) /* Protocol sensitive mode of operation */ // VALTAB-FF: REL99 // // Value constants for VAL_lli_negotiation // // VAL-FF: REL99 // #define M_CC_LLI_DEFAULT (0x0) /* Default LLI=256 only */ // VAL-FF: REL99 // #define M_CC_LLI_FULL (0x1) /* Full protocol negotiation */ // VALTAB-FF: REL99 // // Value constants for VAL_assignor_assignee // // VAL-FF: REL99 // #define M_CC_DEFAULT_ASSIGNEE (0x0) /* Message originator is default assignee */ // VAL-FF: REL99 // #define M_CC_ASSIGNOR_ONLY (0x1) /* Message originator is assignor only */ // VALTAB-FF: REL99 // // Value constants for VAL_in_out_band_negotiation // // VAL-FF: REL99 // #define M_CC_INBAND_NEGOTIATION (0x0) /* Negotiation is done inband using logical link zero */ // VAL-FF: REL99 // #define M_CC_OUTBAND_NEGOTIATION (0x1) /* Negotiation is done with USER INFORMATION messages on a temporary signalling connection */ /* * Value constants for VAL_max_nof_supp_bearers */ #define M_CC_VAL_MAX_NOF_SUPP_BEARERS___DEF (0x0) /* Reserved */ #define M_CC_MAX_NOF_SUPP_BEARER_1 (0x1) /* 1 bearer suppported */ /* * Value constants for VAL_max_nof_supp_speech_bearers */ #define M_CC_VAL_MAX_NOF_SUPP_SPEECH_BEARERS___DEF (0x0)/* Reserved */ #define M_CC_MAX_NOF_SUPP_SPEECH_BEARER_0 (0x0) /* 0 speech bearer suppported */ #define M_CC_MAX_NOF_SUPP_SPEECH_BEARER_1 (0x1) /* 1 speech bearer suppported */ // VALTAB-FF: REL99 // // Value constants for VAL_cause_no_cli // // #define M_CC_VAL_CAUSE_NO_CLI___DEF (0x0) /* Other values shall be interpreted as Unavailable */ // VAL-FF: REL99 // #define M_CC_CAUSE_NO_CLI_UNAVAILABLE (0x0) /* CLI is unavailable */ // VAL-FF: REL99 // #define M_CC_CAUSE_NO_CLI_USER_REJECT (0x1) /* CLI rejected by remote user */ // VAL-FF: REL99 // #define M_CC_CAUSE_NO_CLI_INTERACT_OTHER_SERVICE (0x2)/* Interaction with other service */ // VAL-FF: REL99 // #define M_CC_CAUSE_NO_CLI_PAYPHONE (0x3) /* Coin line/payphone */ // VALTAB-FF: REL99 // // Value constants for VAL_priority_grant // // VAL-FF: REL99 // #define M_CC_PRIO_NONE (0x0) /* no priority applied */ // VAL-FF: REL99 // #define M_CC_PRIO_4 (0x1) /* call priority level 4 */ // VAL-FF: REL99 // #define M_CC_PRIO_3 (0x2) /* call priority level 3 */ // VAL-FF: REL99 // #define M_CC_PRIO_2 (0x3) /* call priority level 2 */ // VAL-FF: REL99 // #define M_CC_PRIO_1 (0x4) /* call priority level 1 */ // VAL-FF: REL99 // #define M_CC_PRIO_0 (0x5) /* call priority level 0 */ // VAL-FF: REL99 // #define M_CC_PRIO_B (0x6) /* call priority level B */ // VAL-FF: REL99 // #define M_CC_PRIO_A (0x7) /* call priority level A */ // VALTAB-FF: REL99 // // Value constants for VAL_alerting_pat // // #define M_CC_VAL_ALERTING_PAT___DEF (0x0) /* Reserved */ // VAL-FF: REL99 // #define M_CC_ALERT_1 (0x0) /* alerting pattern 1 */ // VAL-FF: REL99 // #define M_CC_ALERT_2 (0x1) /* alerting pattern 2 */ // VAL-FF: REL99 // #define M_CC_ALERT_3 (0x2) /* alerting pattern 3 */ // VAL-FF: REL99 // #define M_CC_ALERT_5 (0x4) /* alerting pattern 5 */ // VAL-FF: REL99 // #define M_CC_ALERT_6 (0x5) /* alerting pattern 6 */ // VAL-FF: REL99 // #define M_CC_ALERT_7 (0x6) /* alerting pattern 7 */ // VAL-FF: REL99 // #define M_CC_ALERT_8 (0x7) /* alerting pattern 8 */ // VAL-FF: REL99 // #define M_CC_ALERT_9 (0x8) /* alerting pattern 9 */ /* * user defined constants */ #define M_CC_L3MAX (0xfb) #define M_CC_MAX_SS_VERSION (0x1) #define M_CC_MAX_USER_USER_LENGTH (0x80) #include "CDG_LEAVE.h" #endif