view src/cs/drivers/drv_app/lcc/lcc_modulate.h @ 300:edcb8364d45b

L1: resurrect TCH tap feature In this new incarnation of our TCH tap feature, we support DL sniffing in all 3 of FR1, HR1 and EFR, and the new implementation will capture every 20 ms frame where the old one silently skipped a frame (sent nothing) during FACCH stealing. The wire interface on RVTMUX changed slightly, and fc-shell tch record will need to be updated to support the new version. TCH UL play or substitution is supported for FR1 and EFR only; support for HR1 can be added later if needed.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 13 Dec 2022 02:44:01 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR SW Modulation
 *
 * $Id: pwr_modulate.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_MODULATE_H__
#define __LCC_MODULATE_H__

#include "lcc/lcc.h"
#include "lcc/lcc_cfg.h"

// SW modulation using the following addresses
#if (USE_PWL_AS_MODULATOR == 1)
// D-Sample - no modulation - just envelope function to simulate GPIO 6
    #define PWL_LEVEL_REG (*(volatile unsigned char*) 0xFFFE8000)
    #define PWL_CTRL_REG  (*(volatile unsigned char*) 0xFFFE8001)
    #define BUZZ_LIGHT_REG (*(volatile short*) 0xFFFE480E) // Enable buzzer (bit 0) and PWL (bit 1)
#endif
/******************************************************************************
 * Function prototypes
 ******************************************************************************/

void pwr_modulate_init(void);
void pwr_modulate_on(void);
void pwr_modulate_off(void);

#endif