view src/cs/drivers/drv_core/uart/traceswitch.h @ 263:b5e8dfd114a7

Switch_ON(): go into charging boot mode on either CHGSTS or CHGPRES If someone were to plug and then unplug a charger into a switched-off phone in an extremely brief "glitch" manner, we should do an automatic power-off on boot in this condition. When we were checking only CHGPRES in Switch_ON(), we would go into Misc boot state instead, which is undesirable. Now if we have a CHGSTS but not CHGPRES condition, we will go into charging boot mode, and FCBM will then do the automatic power-off upon detecting absence of the charger in its periodic polling.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 14 May 2021 05:50:36 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
 *
 * TRACESWITCH.H
 *
 * This module defines constants used by UART and USART trace drivers.
 *
 * (C) Texas Instruments 1999
 *
 ******************************************************************************/

#ifndef __TRACESWITCH_H__
#define __TRACESWITCH_H__

typedef enum {
    TR_BAUD_406250,
    TR_BAUD_115200,
    TR_BAUD_57600,
    TR_BAUD_38400,
    TR_BAUD_33900,
    TR_BAUD_28800,
    TR_BAUD_19200,
    TR_BAUD_14400,
    TR_BAUD_9600,
    TR_BAUD_4800,
    TR_BAUD_2400,
    TR_BAUD_1200,
    TR_BAUD_600,
    TR_BAUD_300,
    TR_BAUD_150,
    TR_BAUD_75,
    TR_BAUD_812500	/* FreeCalypso addition */
} T_tr_Baudrate;

#endif /* __TRACESWITCH_H__ */