view scripts/cfg-template @ 244:96784b8974eb

Switch_ON(): detect charging mode by CHGPRES bit Consider the following scenario: the phone is on, the user plugs in the charger, and then executes the power-off operation. In the Iota VRPC this sequence translates to a switch-off immediately followed by another switch-on - but the CHGSTS bit doesn't get set on the second switch-on cycle! Disassembly of Pirelli's fw shows that they check the CHGPRES bit, and furthermore, if both CHGPRES and ONBSTS are set, the code they pass to their modified Power_ON_Button() function is the one for charging - so let's adopt the same CHGPRES check and the same priority order for switch-on causes.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 03 May 2021 06:51:29 +0000
parents b55b47f49638
children
line wrap: on
line source

[board.cfg]

BOARD 41

[chipset.cfg]

ANLG_FAM 2
ANLG_PG 0
CHIPSET var

[debug.cfg]

TI_NUC_MONITOR 0
TI_PROFILER var

[dio.cfg]

DIOIL_CONFIG 0

[ffs.cfg]

TARGET 1
_RVF 1

[l1sw.cfg]

AMR var
CUST 0
DCO_ALGO 0
IDS var
L1_12NEIGH 1
L1_EOTD 0
L1_EOTD_QBIT_ACC 0
L1_GPRS var
L1_GTT 0
L1_MIDI 0
L1_VOICE_MEMO_AMR var
MELODY_E2 var
OP_L1_STANDALONE 0
OP_RIV_AUDIO 1
ORDER2_TX_TEMP_CAL 1
RAZ_VULSWITCH_REGAUDIO 0
SECURITY 0
SPEECH_RECO var
TESTMODE 1
TRACE_TYPE 4
VCXO_ALGO 1

[r2d.cfg]

R2D_ASM 0
R2D_EMBEDDED_LCD var
R2D_LCD_TEST 0

[rf.cfg]

RF var
RF_FAM var
RF_PA var
RF_PG var

[rv.cfg]

RVTOOL 0
TEST 0
_GSM 1

[swconfig.cfg]

ALR 1
BT 0
DP 0
DWNLD 1
GSMLITE 0
L1_DYN_DSP_DWNLD var
LONG_JUMP 3
MOVE_IN_INTERNAL_RAM 1
OP_WCP 0
PMODE var
RVDATA_INTERNALRAM 0
SRVC var
TR_BAUD_CONFIG var
WCP_PROF 0

[sys.cfg]

DSP var
STD 6

[trace.cfg]

LAYER_DBG 0xFFFFFFFF
TRACE_LEVEL_FILTER 5