FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_core/timer/timer.h @ 75:8697f358f505
backlight rework: Condat light driver accepts levels
The present change is another intermediate step on the path toward
new FreeCalypso backlight handling. At this intermediate step the
Condat light driver accepts 0-255 backlight levels driven by MFW,
and puts them out on PWL on Luna development boards. At the same
time on C139 it is now possible to turn on the display backlight
with or without the keypad bl - the lsb of the 0-255 backlight level
controls the keypad bl.
MFW presently drives only 0 and 255 backlight levels, thus there is
no visible behavioral change yet - but the plan for subsequent stages
of this backlight rework is to add a dimmed backlight state
(no keypad bl on C139) during active calls.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 20:44:04 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer.h Description : timer.c header Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.3 Date and time : 07/23/98 16:25:53 Previous delta : 07/23/98 16:25:52 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.h Sccs Id (SID) : '@(#) timer.h 1.3 07/23/98 16:25:53 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #define TIMER_CNTL_REG MEM_TIMER_ADDR /* watchdog Control Timer register */ #define TIMER_ST 0x0080 #define TIMER_AR 0x0100 #define TIMER_PTV 0x0e00 #define TIMER_CNTL_MASK 0x0f80 #define TIMER_MODE_MASK 0x80ff #define TIMER_LOAD_REG (MEM_TIMER_ADDR + 0x02) /* Timer load register */ #define TIMER_READ_REG (MEM_TIMER_ADDR + 0x02) /* Timer read register */ #define TIMER_MODE_REG (MEM_TIMER_ADDR + 0x04) /* Timer mode register */ #define TIMER_WDOG 0x8000 /* watch dog */ #define START_STOP 1 /*to start or stop a timer */ #define AR 0x0002 #define PTV 0x001c #define TIMER_CLK_EN 0x0020 #define TIMER1_CNTL (MEM_TIMER1 + 0x00) #define TIMER1_LOAD_TIM (MEM_TIMER1 + 0x02) #define TIMER1_READ_TIM (MEM_TIMER1 + 0x04) #define TIMER2_CNTL (MEM_TIMER2 + 0x00) #define TIMER2_LOAD_TIM (MEM_TIMER2 + 0x02) #define TIMER2_READ_TIM (MEM_TIMER2 + 0x04) /*-------------------------------------------------------------- * TIMER_START_STOP () *-------------------------------------------------------------- * Parameters : start or stop command * Return : none * Functionality : Start or Stop the timer *--------------------------------------------------------------*/ #define TIMER_START_STOP(startStop) ((startStop) ? ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) |= TIMER_ST) : \ ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) &= ~TIMER_ST)) /* Prototype of the functions */ void TM_ResetTimer (SYS_UWORD16 timerNum, SYS_UWORD16 countValue, SYS_UWORD16 autoReload, SYS_UWORD16 clockScale); void TM_StopTimer (int timerNum); void TM_StartTimer (int timerNum); SYS_UWORD16 TM_ReadTimer (int timerNum); void TM_DisableWatchdog(void); void TM_EnableWatchdog(void); void TM_ResetWatchdog(SYS_UWORD16 cnt); void TM_EnableTimer (int timerNum); void TM_DisableTimer (int timerNum); SYS_UWORD16 TIMER_Read (unsigned short); void TIMER_WriteValue (SYS_UWORD16); unsigned short TIMER_ReadValue (void);