view src/ui/mfw/mfw_tim.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 67bfe9f274f6
children 92abb46dc1ba
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: mfw_tim.h       $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 8               $|
| CREATED: 21.09.98                     $Modtime:: 2.03.00 11:50    $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : MFW_TIM

   PURPOSE : Timer types & constants

   EXPORT  :

   TO DO   :

   $History:: mfw_tim.h                                             $
 * 
 * *****************  Version 8  *****************
 * User: Es           Date: 3.03.00    Time: 12:10
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * timStart(), timSignal() etc.: safer handling of simultaneous
 * timeouts; additional chain in timer control block.
 *
 * *****************  Version 7  *****************
 * User: Nm           Date: 18.02.00   Time: 12:34
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * change the name timSetup to
 * timSetTime
 *
 * *****************  Version 6  *****************
 * User: Nm           Date: 18.02.00   Time: 12:21
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * add timSetup()
 *
 * *****************  Version 5  *****************
 * User: Es           Date: 14.06.99   Time: 12:14
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 4  *****************
 * User: Es           Date: 17.02.99   Time: 19:11
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 3  *****************
 * User: Es           Date: 14.01.99   Time: 17:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 2  *****************
 * User: Es           Date: 23.12.98   Time: 16:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
*/

#ifndef _DEF_MFW_TIM_H_
#define _DEF_MFW_TIM_H_

typedef struct MfwTimTag                /* TIMER CONTROL BLOCK      */
{
    S32 time;                           /* timeout time             */
    S32 left;                           /* time left before timeout */
    MfwCb handler;                      /* event handler            */
    struct MfwTimTag *next;             /* next in active chain     */
    struct MfwTimTag *next2;            /* next in timeout chain    */
    // PATCH LE 06.06.00
    // add pointer to MFW header element
    MfwHdr * mfwHeader;                /* Associated header.  SPR#1597 - SH - Change mfw_header to mfwHeader */
    // END PATCH LE 06.06.00
} MfwTim;

                                        /* PROTOTYPES               */
MfwRes timInit (void);
MfwRes timExit (void);
MfwHnd timCreate (MfwHnd w, S32 t, MfwCb f);
MfwRes timDelete (MfwHnd h);
MfwRes timStart (MfwHnd tim);
MfwRes timStop (MfwHnd tim);
MfwRes timSetTime (MfwHnd tim, S32 t);
S32 timTime (MfwHnd h);
void timSignal (void);

/* Added to remove warning */
EXTERN UBYTE dspl_Enable (UBYTE   in_Enable);

#endif