view src/g23m-aci/aci/psa_l2r.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_L2R
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the protocol stack adapter
|             Layer 2 Relay ( L2R )
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_L2R_H
#define PSA_L2R_H

/*==== CONSTANTS ==================================================*/

typedef enum
{
  L2R_DEACTIVATED = 0,
  L2R_ACTIVATE,
  L2R_CONNECT,
  L2R_CONNECTED,
  L2R_ENABLE,
  L2R_ENABLED,
//  L2R_DISABLE,
  L2R_DETACH,
  L2R_DISCONNECT,
  L2R_DEACTIVATE,
  L2R_ESCAPE
} T_L2R_STATE;


/*==== TYPES ======================================================*/

typedef struct
{
  UBYTE  rlp_vers;                /* L2R_XID_IND */
  USHORT k_ms_iwf;                /* L2R_ACTIVATE_REQ, L2R_XID_IND */
  USHORT k_iwf_ms;
  UBYTE  t1;
  UBYTE  t2;
  UBYTE  n2;
  UBYTE  pt;
  UBYTE  p0;
  USHORT p1;
  UBYTE  p2;
  UBYTE  uil2p;
  UBYTE  rate;
  USHORT err_cause;               /* L2R_ERROR_IND */ 
  ULONG  error_rate;              /* L2R_STATISTIC_IND */
  USHORT reset;                   /* L2R_RESET_IND */
} T_L2R_SET_PRM;

typedef struct L2RShrdParm
{
  UBYTE         owner;
  UBYTE         state;
  UBYTE         uart_conn;
  T_L2R_SET_PRM set_prm[OWN_SRC_MAX];
  T_L2R_SET_PRM set_prm_use;
} T_L2R_SHRD_PRM;

typedef struct L2RTstPrmRef
{
  const char * key;               /* keyword string */
  UBYTE  id;                      /* corresponding id */
} L2R_TSTPRM_REF;

/*==== PROTOTYPES =================================================*/

#ifdef DTI
GLOBAL SHORT psaL2R_Enable( T_DTI_CONN_LINK_ID  link_id, UBYTE peer );
#endif /* DTI */

GLOBAL SHORT psaL2R_Activate( UBYTE srcId );
GLOBAL SHORT psaL2R_Deactivate( void );
void  psaL2R_Init (void);

GLOBAL SHORT psaL2R_ESC( UBYTE src_id );

/*==== EXPORT =====================================================*/

#ifdef PSA_L2RF_C

GLOBAL T_L2R_SHRD_PRM l2rShrdPrm;

#else

EXTERN T_L2R_SHRD_PRM l2rShrdPrm;

#endif /* PSA_L2RF_C */


#endif /* PSA_L2R_H */

/*==== EOF =======================================================*/