FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/line_split_intern.h @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 07:39:54 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : line edit +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul ... +----------------------------------------------------------------------------- */ #ifndef LINE_SPLIT_INTERN_H #define LINE_SPLIT_INTERN_H #define LEDIT_MAX_CMD_NAME_LEN (17) #define LEDIT_MAX_S_NAME_LEN (2) #define SEARCH_BAT_LEN (0) #define SEARCH_DIAL_LEN (1) #define SEARCH_EXT_LEN (2) #define BATCMD_NO_SUPP (0) #define BATCMD_SUPPORT (1) #define BATCMD_DIAL (2) /* D <---- SPECIAL */ #define BATCMD_S_PARAM (3) /* S <---- SPECIAL */ #define ANDCMD_NO_SUPP (0) #define ANDCMD_SUPPORT (1) typedef enum { LEDIT_CHAR_TERMINATED = 0x00, LEDIT_CHAR_PERCENT = 0x25, /* '%' */ LEDIT_CHAR_AND = 0x26, /* '&' */ LEDIT_CHAR_PLUS = 0x2B, /* '+' */ LEDIT_CHAR_COMMA = 0x2C, /* ',' */ LEDIT_CHAR_NUMBER = 0x30, /* '0' symbolic for 0..9 */ LEDIT_CHAR_SEPARATOR = 0x3B, /* ';' */ LEDIT_CHAR_SET = 0x3D, /* '=' */ LEDIT_CHAR_READ = 0x3F, /* '?' */ LEDIT_CHAR_CHAR = 0x41, /* 'A' symbolic for A..Z*/ LEDIT_CHAR_EXT = 0x5B, /*'[' symbolic for the rest of characters*/ LEDIT_CHAR_INVALID = 0xFF } T_LEDIT_CHAR_TYPE; typedef enum { LEDIT_BASIC_NAME, /* consists of one char only */ LEDIT_S_NAME, /* first char must be 'S' and then only digits */ LEDIT_EXT_NAME /* multi char name */ } T_LEDIT_NAME_TYPE; typedef enum { LEDIT_BASIC_PARAM, /* consists of digits only */ LEDIT_DIAL_PARAM, /* the ending ';' is important to inform about voice or data call */ LEDIT_EXT_PARAM /* digits ,, "strings" ; */ } T_LEDIT_PARAM_TYPE; EXTERN T_LEDIT_RSLT ledit_split (T_LEDIT_INTERN *leditInt); EXTERN void ledit_free_cmd (T_LEDIT_INTERN *leditInt); #endif