view src/g23m-aci/aci/cmh_mmi.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_MMI_H
#define CMH_MMI_H

/*==== CONSTANTS ==================================================*/
 
 
/*==== TYPES ======================================================*/

#ifdef ACI /* for for ATI only version */
typedef enum
{
  AUDIO_IN  =  75, /* audio in   */
  AUDIO_OUT = 175, /* audio out  */
  KEY_BEEP  = 100, /* key beep   */
  DTMF_TONE = 100, /* dtmf tone  */
  RINGER    = 100  /* ringer     */
}
T_VOLUME_TYPE;

typedef enum
{
  SWITCH_AUDIO_NONE,
  SWITCH_AUDIO_OFF,
  SWITCH_AUDIO_ALERT,
  SWITCH_AUDIO_BUSY,
  SWITCH_AUDIO_CALLWAIT
}
T_ACI_IBT_ACT;

typedef struct
{
  T_ACI_CPI_IBT ati_currIbt;
  T_ACI_CPI_TCH ati_currTch;
  T_ACI_IBT_ACT last_action;
} T_IBT_TYPE;

#endif

/*==== PROTOTYPES =================================================*/
GLOBAL void cmhMMI_keyIndication ( void );
GLOBAL void cmhMMI_rxIndication  ( void );
GLOBAL void cmhMMI_btIndication  ( void );

#ifdef ACI
GLOBAL void cmhMMI_setAudioVolume (  BYTE          audioIn, 
                                     BYTE          audioOut );

GLOBAL void cmhMMI_handleAudioTone ( T_ACI_AT_CMD  cmdId,
																		 UBYTE         response,
                                     T_ACI_CPI_MSG msgType );


/*==== EXPORT =====================================================*/

#ifdef CMH_MMIS_C
GLOBAL T_IBT_TYPE ibt_params;
#else
EXTERN T_IBT_TYPE ibt_params;
#endif

#endif /* ACI */

#endif /* CMH_MMI_H */

/*==== EOF =======================================================*/