FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_core/timer/timer1.h @ 72:7bf39f5e834d
backlight control on Luna: switch PWL instead of LEDB
This change is preliminary toward upcoming rework of backlight control
logic in our UI firmware. LEDB does not exist on Tango-based platforms
(it is not brought out on Tango modules), thus turning it on and off
produces absolutely no effect beyond making L1 disable deep sleep
when LEDB is turned on. However, both iWOW DSK and our upcoming
FC Caramel2 boards have a PWL LED, so let's switch that LED on and off
to indicate the state of the UI firmware's backlight control.
Note that we are NOT switching the actual Luna LCD backlight here,
even though it is trivially controlled with a GPIO. The reason for
this seemingly strange choice is that we don't want to turn this
development board LCD backlight off until we bring the higher-level
backlight control logic up to par, including new logic to "swallow"
the first keypress that turns on the darkened LCD.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 07:39:54 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer1.h Description :TIMER1 Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.7 Date and time : 02/15/01 15:47:06 Previous delta : 02/15/01 15:47:06 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/mod/emu_p/EMU_P_FRED/drivers1/common/SCCS/s.timer1.h Sccs Id (SID) : '@(#) timer1.h 1.7 02/15/01 15:47:06 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif /**** DIONE TIMERs configuration register ****/ #define D_TIMER_ADDR 0xfffe3800 #define D_TIMER_CNTL_MASK 0x001f #define CNTL_D_TIMER_OFFSET 0x0000 #define LOAD_D_TIMER_OFFSET 0x0002 #define READ_D_TIMER_OFFSET 0x0004 #define D_TIMER_CNTL (D_TIMER_ADDR+CNTL_D_TIMER_OFFSET) #define D_TIMER_LOAD (D_TIMER_ADDR+LOAD_D_TIMER_OFFSET) #define D_TIMER_READ (D_TIMER_ADDR+READ_D_TIMER_OFFSET) #define D_TIMER_ST 0x0001 /* bit 0 */ #define D_TIMER_AR 0x0002 /* bit 1 */ #define D_TIMER_PTV 0x001c /* bits 4:2 */ #define D_TIMER_CLK_EN 0x0020 /* bit 5 */ #define D_TIMER_RUN 0x0021 /* bit 5 ,0 */ #define LOAD_TIM 0xffff /* bits 15:0 */ /* ----- Prototypes ----- */ SYS_UWORD16 Dtimer1_Get_cntlreg(void); void Dtimer1_AR(SYS_UWORD16 Ar); void Dtimer1_PTV(SYS_UWORD16 Ptv); void Dtimer1_Clken(SYS_UWORD16 En); void Dtimer1_Start (SYS_UWORD16 startStop); void Dtimer1_Init_cntl (SYS_UWORD16 St, SYS_UWORD16 Reload, SYS_UWORD16 clockScale, SYS_UWORD16 clkon); void Dtimer1_WriteValue (SYS_UWORD16 value); SYS_UWORD16 Dtimer1_ReadValue (void);