view src/condat/com/include/rx.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM (6301)
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Types definitions for the fieldstrength driver
|             .
+----------------------------------------------------------------------------- 

 $Hist       

    Oct 05, 2006    ER: OMAPS00094496 x0061088(Prachi)
    Description:Enhance RSSI to 3 parameters: Strength, quality, min-access-level
    Solution:In order to provide a more accurate antenna icon on screen, in addition to "signal strength" the parameters
    "signal quality" and "Min-aces-level" are required. 

*/ 

#ifndef RX_H
#define RX_H

/*
 * Signal Values
 */
#define RX_QUAL_UNAVAILABLE   0xFF /* should be kept identically   */ 
                                   /* with the value defined in RR */
#ifdef FF_PS_RSSI
#define RX_ACCE_UNAVAILABLE   0xFF
#endif

/*
 * Signal Types
 */
#define RX_SIGTYPE_RXLEVEL    0

/*
 * Status Type
 */
typedef struct rx_Status_Type
{
  UBYTE actLevel;
  UBYTE gsmLevel;
  UBYTE rxQuality;
#ifdef FF_PS_RSSI
  UBYTE min_access_level;
#endif
} rx_Status_Type;

/*
 * Driver Control Block
 */
typedef struct rx_DCB_Type
{
  UBYTE    Steps;
} rx_DCB_Type;

#if defined (NEW_FRAME)
/*
 * to achieve backward compatibility with older definitions
 */
#define drv_SignalCB_Type           T_DRV_CB_FUNC
#define drv_SignalID_Type           T_DRV_SIGNAL
#define T_VSI_THANDLE               USHORT
#endif
/*
 * Prototypes
 */
EXTERN UBYTE rx_Init        (drv_SignalCB_Type   in_SignalCBPtr);
EXTERN void  rx_Exit        (void);
EXTERN UBYTE rx_SetConfig   (rx_DCB_Type       * in_DCBPtr);
EXTERN UBYTE rx_GetConfig   (rx_DCB_Type       * out_DCBPtr);
EXTERN UBYTE rx_GetStatus   (rx_Status_Type    * out_StatusPtr);
EXTERN void  rx_timeout     (T_VSI_THANDLE       rx_handle);
#endif