view src/condat/com/include/light.h @ 72:7bf39f5e834d

backlight control on Luna: switch PWL instead of LEDB This change is preliminary toward upcoming rework of backlight control logic in our UI firmware. LEDB does not exist on Tango-based platforms (it is not brought out on Tango modules), thus turning it on and off produces absolutely no effect beyond making L1 disable deep sleep when LEDB is turned on. However, both iWOW DSK and our upcoming FC Caramel2 boards have a PWL LED, so let's switch that LED on and off to indicate the state of the UI firmware's backlight control. Note that we are NOT switching the actual Luna LCD backlight here, even though it is trivially controlled with a GPIO. The reason for this seemingly strange choice is that we don't want to turn this development board LCD backlight off until we bring the higher-level backlight control logic up to par, including new logic to "swallow" the first keypress that turns on the darkened LCD.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 07:39:54 +0000
parents 4e78acac3d88
children 8697f358f505
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM (6301)
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Types definitions for the light emitting driver
|             .
+----------------------------------------------------------------------------- 
*/ 

#ifndef LIGHT_H
#define LIGHT_H

/*
 * devices
 */
#define LIGHT_DEVICE_BACKLIGHT     0
#define LIGHT_DEVICE_INSERVICELED  1

/*
 * device status
 */
#define LIGHT_STATUS_OFF           0
#define LIGHT_STATUS_ON            1
#define LIGHT_STATUS_DIMMED        2
#define LIGHT_STATUS_INTERMEDIATE  3
#define LIGHT_STATUS_BRIGHT        4

#define LIGHT_STATUS_GREEN         5
#define LIGHT_STATUS_ORANGE        6
#define LIGHT_STATUS_RED           7

#if defined (NEW_FRAME)
/*
 * to achieve backward compatibility with older definitions
 */
#define drv_SignalCB_Type           T_DRV_CB_FUNC
#define drv_SignalID_Type           T_DRV_SIGNAL
#define T_VSI_THANDLE               USHORT
#endif
/*
 * Prototypes
 */
EXTERN UBYTE light_Init      (void);
EXTERN void  light_Exit      (void);
EXTERN UBYTE light_SetStatus (UBYTE in_DeviceID, UBYTE in_NewStatus);
EXTERN UBYTE light_GetStatus (UBYTE in_DeviceID, UBYTE * in_StatusPtr);

void light_setBacklightOn( void );
void light_setBacklightIdle( void );
void light_setBacklightOff( void );

#endif