FreeCalypso > hg > fc-tourmaline
view src/cs/system/main/mem_load.c @ 275:79cfefc1e2b4
audio mode load: gracefully handle mode files of wrong AEC version
Unfortunately our change of enabling L1_NEW_AEC (which is necessary
in order to bring our Calypso ARM fw into match with the underlying
DSP reality) brings along a change in the audio mode file binary
format and file size - all those new tunable AEC parameters do need
to be stored somewhere, after all. But we already have existing
mode files in the old format, and setting AEC config to garbage when
loading old audio modes (which is what would happen without the
present change) is not an appealing proposition.
The solution implemented in the present change is as follows: the
audio mode loading code checks the file size, and if it differs
from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure
is cleared - set to the default (disabled AEC) for the compiled type
of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure
sits at the end of T_AUDIO_MODE!
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 30 Jul 2021 02:55:48 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * MEM_LOAD.C * * Filename mem_load.c * Version 1.6 * Date 06/20/01 * ************* Revision Controle System Header *************/ #ifndef _WINDOWS #include "chipset.cfg" #include "board.cfg" #include "swconfig.cfg" #endif #include "l1sw.cfg" /* OP_L1_STANDALONE definition */ #if ((((CHIPSET == 3) || (CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || \ (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11)) && (LONG_JUMP != 0)) || \ (CHIPSET == 12) ||(CHIPSET == 15)) /* * USE_GZIP flag is used by modem binaries compression feature on P2. * For P2 build variants it is defined globally - either in master.cfg (HBB) * or P2's configdef *.xml files (UBB). * The following definition is for all other platforms - just to * suppress compilation warnings. */ #ifndef USE_GZIP #define USE_GZIP 0 #endif #if (OP_L1_STANDALONE == 1) #define D_LOAD_START _470_INT_MEM_out_call_load_start #define D_RUN_START _470_INT_MEM_out_call_run_start #define D_RUN_END _470_INT_MEM_out_call_run_end #else #define D_LOAD_START _470_S_MEM_out_call_load_start #define D_RUN_START _470_S_MEM_out_call_run_start #define D_RUN_END _470_S_MEM_out_call_run_end #endif typedef unsigned char UWORD8; typedef unsigned short int UWORD16; typedef unsigned long int UWORD32; UWORD16 d_checksum1; UWORD16 d_checksum2; /* NEW COMPILER MANAGEMENT * INT_memset and INT_memcpy, respectively identical to memset and * memcpy from the rts library of compiler V2.51, are defined in int.s. * They are used to make the initialization of the .bss section and the load * of the internal ram code not dependent to the 32-bit alignment. * The old code used for the initialization and the load used a loop with * 4-byte increment, assuming the 32-bit alignment of the .bss section. * This alignment is not true with compiler V2.51. * This change applies whatever the compiler version. * INT_memset replaces f_zero * INT_memcpy replaces f_download */ extern void INT_memset(void *s, int c, UWORD32 n); extern void INT_memcpy(void *s1, void *s2, UWORD32 n); #if (OP_L1_STANDALONE == 0) && (BOARD == 35) && (USE_GZIP == 1) extern void decompress(unsigned long input_start, unsigned long input_length, unsigned long output_start); #else UWORD16 f_checksum(UWORD8 *p_begin, UWORD32 d_length) { UWORD16 d_checksum = 0x0000; while(d_length > 0) { d_checksum += *(p_begin++); d_length --; } return(d_checksum); } #endif #if (CHIPSET == 12) || (CHIPSET == 15) /* * Load start address of the interrupt vector table from FLASH into Internal SRAM */ #define C_NUMBER_OF_INTERRUPT_VECTOR 7 #pragma DATA_SECTION(d_interrupt_load_start,".intload") const UWORD32 d_interrupt_load_start=0L; extern const UWORD32 IndirectVectorTable[C_NUMBER_OF_INTERRUPT_VECTOR * 2]; #define C_INTERRUPT_VECTOR_LOAD_START (UWORD32)((UWORD32)(&d_interrupt_load_start) + 4) #define C_INTERRUPT_VECTOR_RUN_START (UWORD32)((UWORD32)&IndirectVectorTable[0]) #define C_INTERRUPT_VECTOR_LENGTH (UWORD32)(C_NUMBER_OF_INTERRUPT_VECTOR * 2 * sizeof(UWORD32)) #endif /* (CHIPSET == 12) || (CHIPSET == 15)*/ #if ((LONG_JUMP == 3) || (((CHIPSET==15)||(CHIPSET == 12)) && (LONG_JUMP == 0))) /* * Load start address of the code downloaded from FLASH into Internal SRAM */ #pragma DATA_SECTION(d_application_load_start,".ldfl") const UWORD32 d_application_load_start=0L; #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12) || (CHIPSET==15)) && (LONG_JUMP == 0)) extern UWORD8 D_LOAD_START; #endif /* (((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) */ #endif /* (TOOL_CHOICE == 0) */ #endif /* (OP_WCP == 0) */ /* * Run start address of the code downloaded from FLASH into Internal SRAM */ #pragma DATA_SECTION(d_application_run_start,"S_P_Mem") const UWORD32 d_application_run_start = 0L; #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) extern UWORD8 D_RUN_START; #endif /* (((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) */ #endif /* (TOOL_CHOICE == 0) */ #endif /* (OP_WCP == 0) */ /* * Run end address of the code downloaded from FLASH into Internal SRAM */ #pragma DATA_SECTION(d_application_run_end,"E_P_Mem") const UWORD32 d_application_run_end = 0L; #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) extern UWORD8 D_RUN_END; #endif /* (((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) */ #endif /* (TOOL_CHOICE == 0) */ #endif /* (OP_WCP == 0) */ /* * Application download */ #define C_APPLICATION_LOAD_START (UWORD32)((UWORD32 *)(&d_application_load_start) + 2) #define C_APPLICATION_RUN_START (UWORD32)((UWORD32)(&d_application_run_start) + sizeof(UWORD32)) #define C_APPLICATION_RUN_END (UWORD32)((UWORD32)(&d_application_run_end) + sizeof(UWORD32)) #define C_APPLICATION_LENGTH (UWORD32)(C_APPLICATION_RUN_END - C_APPLICATION_RUN_START - sizeof(UWORD32)) #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) /* * Trampoline download */ #define C_TRAMPOLINE_LOAD_START (UWORD32)(&D_LOAD_START) #define C_TRAMPOLINE_RUN_START (UWORD32)(&D_RUN_START) #define C_TRAMPOLINE_RUN_END (UWORD32)(&D_RUN_END) #define C_TRAMPOLINE_LENGTH (UWORD32)(&D_RUN_END - &D_RUN_START) #endif /* (((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) */ #endif /* (TOOL_CHOICE == 0) */ #endif /* (OP_WCP == 0) */ void f_load_int_mem(void) { /* * Reset checksum of code downloaded */ d_checksum1 = 0; /* Load checksum */ d_checksum2 = 0; /* Run checksum */ /* * Reset the Internal memory where the code must be downloaded */ INT_memset((void *)(C_APPLICATION_RUN_START),0,C_APPLICATION_LENGTH); #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) INT_memset((void *)(C_TRAMPOLINE_RUN_START),0,C_TRAMPOLINE_LENGTH); #endif #endif /* (TOOL_CHOICE == 0) */ #if ((CHIPSET == 12)||(CHIPSET==15)) INT_memset((void *)(C_INTERRUPT_VECTOR_RUN_START),0,C_INTERRUPT_VECTOR_LENGTH); #endif #endif /* (OP_WCP == 0) */ #if (OP_L1_STANDALONE == 0) && (BOARD == 35) && (USE_GZIP == 1) #define C_GZIP_START (C_APPLICATION_LOAD_START) #define C_GZIP_LENGTH (*(UWORD32*)C_APPLICATION_LOAD_START) #define C_GZIP_OUT (C_APPLICATION_RUN_START - sizeof(UWORD32)) /* De-compress on-the-fly and load to internal RAM */ decompress(C_GZIP_START, /* load start (compressed) */ C_GZIP_LENGTH, /* compressed length */ C_GZIP_OUT); /* run start */ #else /* * Compute checksum on code in FLASH (code and trampoline functions) */ d_checksum1 = f_checksum((UWORD8 *)(C_APPLICATION_LOAD_START), C_APPLICATION_LENGTH); #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) d_checksum1 += f_checksum((UWORD8 *)(C_TRAMPOLINE_LOAD_START), C_TRAMPOLINE_LENGTH); #endif #endif /* (TOOL_CHOICE == 0) */ #if ((CHIPSET == 12)||(CHIPSET==15)) d_checksum1 += f_checksum((UWORD8 *)(C_INTERRUPT_VECTOR_LOAD_START), C_INTERRUPT_VECTOR_LENGTH); #endif #endif /* (OP_WCP == 0) */ /* * Download code from FLASH into Internal RAM (both code and trampoline functions) */ INT_memcpy((void *)(C_APPLICATION_RUN_START),(void *)(C_APPLICATION_LOAD_START),C_APPLICATION_LENGTH); #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) INT_memcpy((void *)(C_TRAMPOLINE_RUN_START),(void *)(C_TRAMPOLINE_LOAD_START),C_TRAMPOLINE_LENGTH); #endif #endif /* (TOOL_CHOICE == 0) */ #if ((CHIPSET == 12)||(CHIPSET==15)) INT_memcpy((void *)(C_INTERRUPT_VECTOR_RUN_START),(void *)(C_INTERRUPT_VECTOR_LOAD_START),C_INTERRUPT_VECTOR_LENGTH); #endif #endif /* (OP_WCP == 0) */ /* * Compute checksum on code in FLASH (code and trampoline functions) */ d_checksum2 = f_checksum((UWORD8 *)(C_APPLICATION_RUN_START), C_APPLICATION_LENGTH); #if ((OP_WCP == 0) || (OP_L1_STANDALONE == 1)) #if (TOOL_CHOICE == 0) /* NEW COMPILER MANAGEMENT * If use of VISUAL LINKER, needs to manage trampoline download. * Case of: * - TOOL_CHOICE == 0 => compiler v1.22e with vlinker v1.9902 */ #if !(((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0)) d_checksum2 += f_checksum((UWORD8 *)(C_TRAMPOLINE_RUN_START), C_TRAMPOLINE_LENGTH); #endif #endif /* (TOOL_CHOICE == 0) */ #if ((CHIPSET == 12)||(CHIPSET==15)) d_checksum2 += f_checksum((UWORD8 *)(C_INTERRUPT_VECTOR_RUN_START), C_INTERRUPT_VECTOR_LENGTH); #endif #endif /* (OP_WCP == 0) */ #endif /* (OP_L1_STANDALONE == 0) && (BOARD == 35) && (USE_GZIP == 1) */ } /* f_load_int_mem() */ #endif /* ((LONG_JUMP == 3) || (((CHIPSET == 12)||(CHIPSET==15)) && (LONG_JUMP == 0))) */ #endif /* ((((CHIPSET == 3) || (CHIPSET == 4) || ... (CHIPSET == 12) || (CHIPSET == 15)) */
