view src/cs/layer1/gtt_include/ctm/ctm_defines.h @ 275:79cfefc1e2b4

audio mode load: gracefully handle mode files of wrong AEC version Unfortunately our change of enabling L1_NEW_AEC (which is necessary in order to bring our Calypso ARM fw into match with the underlying DSP reality) brings along a change in the audio mode file binary format and file size - all those new tunable AEC parameters do need to be stored somewhere, after all. But we already have existing mode files in the old format, and setting AEC config to garbage when loading old audio modes (which is what would happen without the present change) is not an appealing proposition. The solution implemented in the present change is as follows: the audio mode loading code checks the file size, and if it differs from the active version of T_AUDIO_MODE, the T_AUDIO_AEC_CFG structure is cleared - set to the default (disabled AEC) for the compiled type of AEC. We got lucky in that this varying T_AUDIO_AEC_CFG structure sits at the end of T_AUDIO_MODE!
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 02:55:48 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*******************************************************************************
*
*      File          : ctm_defines.h
*      Purpose       : Global constants for the Cellular Text Telephone Modem
*
*******************************************************************************
*/
#ifndef ctm_defines_h
#define ctm_defines_h "$Id: $"

#ifndef MAX
#define MAX(A, B)  ((A) > (B) ? (A) : (B))
#endif

#define MAX_IDLE_SYMB        5  /* Number of Idle Symbols at End of Burst    */
#define CHC_RATE             4  /* Rate of the Error Protection              */
#define CHC_K                5  /* Constraint length of Error Protection     */
#define SYMB_LEN            40  /* Length of one CTM symbol                  */

/* The following constant determines whether the signal processing takes */
/* place sample-by-sample or frame-by-frame (160 samples per frame)      */
// #define LENGTH_TONE_VEC  160  /* signal frame size                         */
#define LENGTH_TONE_VEC      1  /* signal frame size                         */

/* Number of bits that are processed during each call of the main loop   */
//LN March 13, 2002
//#define LENGTH_TX_BITS  MAX(2, 2*LENGTH_TONE_VEC/SYMB_LEN) 
#define LENGTH_TX_BITS   2
//LN  

#define BITS_PER_SYMB        8  /* bits per symbol                           */

#define NCYCLES_0            2  /* Number of periods for symbol #0           */
#define NCYCLES_1            3  /* Number of periods for symbol #1           */
#define NCYCLES_2            4  /* Number of periods for symbol #2           */
#define NCYCLES_3            5  /* Number of periods for symbol #3           */

#define THRESHOLD_RELIABILITY_FOR_SUPPRESSING_OUTPUT  100
#define THRESHOLD_RELIABILITY_FOR_XCORR                 1
#define THRESHOLD_RELIABILITY_FOR_GOING_OFFLINE       100
#define MAX_NUM_UNRELIABLE_GROSS_BITS                 400

#define NUM_BITS_GUARD_INTERVAL   6       /* length of silence after a burst */

#define WAIT_SYNC_REL_THRESHOLD_0 20316   /* = 0.62*32768 */
#define WAIT_SYNC_REL_THRESHOLD_1 17039   /* = 0.52*32768 */
#define WAIT_SYNC_REL_THRESHOLD_2 23265   /* = 0.71*32768 */
#define RESYNC_REL_THRESHOLD      26542   /* = 0.81*32768 */

#define GUARD_BIT_SYMBOL     0  /* "magic number" indicating that a          */
//                              /* bit shall be muted                        */

#define intlvB               8  /* Interleaver block length                  */
#define intlvD               2  /* Interleaver block distance (interlace)    */

#define demodSyncLns         1  /* Nr of demodulator sync lines              */
#define deintSyncLns         0  /* Nr of deinterleaver sync lines            */

#define IDLE_SYMB         0x16  /* UCS code for Idle Symbol                  */
#define ENQU_SYMB         0x05  /* UCS code for Enquiry Symbol               */

#if LENGTH_TONE_VEC==160
#define ENQUIRY_TIMEOUT     20  /* number of frames for negotiation          */
#else
#define ENQUIRY_TIMEOUT   (1320/5) //19*160 
#endif

#define NUM_ENQUIRY_BURSTS   3  /* number of enquiry attempts                */

#define NUM_MUTE_ROWS        4  /* duration of muting interval, 4 rows=80ms  */
#define RESYNC_SEQ_LENGTH   32  /* must be a multiple of intlvB              */

#define NUM_BITS_BETWEEN_RESYNC  352 // 352 = 320+32
/* 352 is a multiple of CHC_RATE, intlvB, and BITS_PER_SYMB,                 */
/* and must be greater than  intlvB*((intlvB-1)*intlvD+NUM_MUTE_ROWS         */

#define SILENCE_PERIOD 32
#define EARLY_SILENCE_PERIOD SILENCE_PERIOD-2 
#define LATE_SILENCE_PERIOD SILENCE_PERIOD+2
#define PLAYBACK_VOLUME      0xC000 /* volume for sound card playback        */

//#define DEBUG_OUTPUT  /* comment this out for regular operation mode!     */

#endif