view src/g23m-aci/aci/psa_t30.h @ 223:740a8e8fc9d7

startup sync logic rework for the new PWON button boot scheme Previously we added logic to the MMI task to hold off PEI init until R2D is running, and then extended that condition to wait for FCHG init too. However, the dependencies of MMI upon R2D and FCHG don't start until mmiInit(), and that call is driven by Switch_ON() code, hence the wait for R2D and FCHG init can be made in that code path instead of the MMI task. Furthermore, with our new way of signaling PWON button boot to MMI, we need a new wait to ensure that the MMI task is up - previously this assurance was provided by the wait for Kp pointers to be set. Solution: revert our previous PEI init hold-off additions to MMI, add a new flag indicating MMI task init done, and put the combined wait for all needed conditions into our new PWON button boot code in power.c.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 27 Apr 2021 06:24:52 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_T30
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the protocol stack adapter T30
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_T30_H
#define PSA_T30_H

#ifdef FF_FAX

#define REPORT_MAX    128
#define MSG_SIZE_BITS 2880

/*==== CONSTANTS ==================================================*/

typedef enum
{
  NO_VLD_FS = 0,                  /* not a valid fax status */
  FS_IDL,                         /* fax idle */
  FS_SND_DOC,                     /* sending fax document */
  FS_RCV_DOC,                     /* receiving fax document */
  FS_DOC_TRF                      /* fax document transfered */
} T_T30_FXST;

/*==== TYPES ======================================================*/

typedef struct
{
  UBYTE        dir;
  USHORT       l_buf;
  UBYTE        buf[REPORT_MAX];
} T_Report;

typedef struct T30ShrdParm
{
  SHORT         cId;              /* related call id */
  UBYTE         faxStat;          /* status of fax */
  USHORT        trans_rate;       /* t30_activate_req, t30_modify_req */
  UBYTE         half_rate;        /* t30_activate_req, t30_modify_req */
  UBYTE         threshold;        /* t30_activate_req */
  UBYTE         bitord;           /* t30_activate_req */
  USHORT        frames_per_prim;  /* t30_activate_req */
  USHORT        tbs;              /* t30_activate_cnf */
  USHORT        rbs;              /* t30_activate_cnf */
  T_hdlc_info   hdlc_rcv;         /* t30_cap_ind, t30_cap_req */
  T_hdlc_info   hdlc_snd;         /* t30_cap_ind, t30_cap_req */
  UBYTE         sgn_rcv;          /* t30_sgn_ind */
  UBYTE         sgn_snd;          /* t30_sgn_req */
  UBYTE         cmpl;             /* t30_cmpl_ind */
  UBYTE         hdlc_report;      /* t30_config_req */
  U16           test_mode;        /* t30_config_req */
  USHORT        err_cause;        /* t30_error_ind */
  USHORT        eol;              /* t30_info_ind */
  T_Report      report;           /* t30_report_ind */
  UBYTE         bcs_phase;        /* ks */
  UBYTE         msg_phase;
  BOOL          T30_is_activated;
} T_T30_SHRD_PRM;

typedef struct T30TstPrmRef
{
  const char * key;               /* keyword string */
  UBYTE  id;                      /* corresponding id */
} T30_TSTPRM_REF;

/*==== PROTOTYPES =================================================*/

EXTERN SHORT psaT30_Ppm          (void);

#ifdef DTI
EXTERN void psaT30_Dti_Req    (T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn);
#endif /* DTI */

#ifdef FF_FAX
EXTERN void  psaT30_Init         (void);
#endif

EXTERN SHORT psaT30_Ppm       (void);
EXTERN void  psaT30_Modify       (void);
EXTERN void  psaT30_Disconnect   (void);
EXTERN void  psaT30_Config       (void);
EXTERN void  psaT30_Capabilities (void);
EXTERN void  psaT30_Activate     (void);
EXTERN void  psaT30_Deactivate   (void);

#ifdef TRACING
EXTERN void psaT30_shrPrmDump ( void );
#endif

/*==== EXPORT =====================================================*/

#ifdef PSA_T30F_C

GLOBAL T_T30_SHRD_PRM t30ShrdPrm;

#else

EXTERN T_T30_SHRD_PRM t30ShrdPrm;

#endif /* PSA_T30F_C */

#endif /* FF_FAX */

#endif /* PSA_T30_H */

/*==== EOF =======================================================*/