view src/g23m-fad/l2r/tra.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  CSD (8411)
|  Modul   :  tra.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the Protocol Stack Entity
|             TRA
+----------------------------------------------------------------------------- 
*/ 

#ifndef TRA_H
#define TRA_H

/*
 * States of the entity process MGT
 */
#define MGT_IDLE            0
#define MGT_INACTIVE        1
#define MGT_ACTIVE          2

 /*
 * States of the entity processes UP & DN
 */
#define UP_INACTIVE 0
#define UP_IDLE     1
#define UP_WAIT     2
#define UP_SEND     3

#define DN_INACTIVE 0
#define DN_IDLE     1
#define DN_WAIT     2
#define DN_SEND     3

/*==== TYPES ======================================================*/

/*
* derived constants
*/

/* global user specific constants */

#define FL_INACTIVE 0
#define FL_ACTIVE   1

/*
* Bitoffset for encoding/decoding, taken from RLP
*/
#define ENCODE_OFFSET 0

typedef enum
{
  NONTRANSP = 0,
  TRANSP    = 1
} T_MODE;


/*lint -e767 macro 'ENTITY_DATA' was defined differently in another module */
#define ENTITY_DATA tra_data

/*
 *  MANAGEMENT signal processing
 */
#ifdef OPTION_MULTITHREAD
#define sig_mgt_tra_up_send_break_req _ENTITY_PREFIXED(sig_mgt_tra_up_send_break_req)
#define sig_mgt_tra_up_break_req      _ENTITY_PREFIXED(sig_mgt_tra_up_break_req)
#define sig_mgt_tra_dn_break_req      _ENTITY_PREFIXED(sig_mgt_tra_dn_break_req)

#define sig_any_tra_dn_send_break_req _ENTITY_PREFIXED(sig_any_tra_dn_send_break_req)
#define sig_up_tra_mgt_break_ind      _ENTITY_PREFIXED(sig_up_tra_mgt_break_ind)
#define sig_dn_tra_mgt_break_ind      _ENTITY_PREFIXED(sig_dn_tra_mgt_break_ind)
#endif

EXTERN void sig_mgt_tra_up_send_break_req(USHORT break_len);
EXTERN void sig_mgt_tra_up_break_req(void);
EXTERN void sig_mgt_tra_dn_break_req(void);

EXTERN void sig_any_tra_dn_send_break_req (void);

EXTERN void sig_up_tra_mgt_break_ind(USHORT break_len);
EXTERN void sig_dn_tra_mgt_break_ind(U8 sa, U8 sb, U8 flow, USHORT break_len);

/*
 *  MANAGEMENT procedures
 */

EXTERN void send_tra_deactivate_cnf(void);
EXTERN void send_tra_dti_cnf(T_TRA_DTI_REQ *tra_dti_req);

/*
 *  DN signal processing
 */

#ifdef OPTION_MULTITHREAD
#define sig_mgt_tra_dn_dti_conn_setup _ENTITY_PREFIXED(sig_mgt_tra_dn_dti_conn_setup)
#define sig_mgt_tra_dn_dti_conn_open  _ENTITY_PREFIXED(sig_mgt_tra_dn_dti_conn_open)
#define sig_mgt_tra_dn_dti_disc       _ENTITY_PREFIXED(sig_mgt_tra_dn_dti_disc)
#endif

EXTERN void sig_mgt_tra_dn_dti_conn_setup(void);
EXTERN void sig_mgt_tra_dn_dti_conn_open(void);
EXTERN void sig_mgt_tra_dn_dti_disc(void);

/*
 *  DN procedures
 */
#ifdef OPTION_MULTITHREAD
#define dl_init                       _ENTITY_PREFIXED(dl_init)
#define rbm_init                      _ENTITY_PREFIXED(rbm_init)
#define dl_send_data_ind              _ENTITY_PREFIXED(dl_send_data_ind )
#define dl_prep_data_ind              _ENTITY_PREFIXED(dl_prep_data_ind)
#endif

EXTERN void dl_init(T_TRA_DN *ddl);
EXTERN void rbm_init(T_TRA_DN *ddl);

EXTERN BOOL dl_send_data_ind (void);
EXTERN void dl_prep_data_ind (T_FD *pFD);

/*
 *  UP signal processing
 */
#ifdef OPTION_MULTITHREAD
#define sig_mgt_tra_up_dti_conn_setup _ENTITY_PREFIXED(sig_mgt_tra_up_dti_conn_setup)
#define sig_mgt_tra_up_dti_conn_open _ENTITY_PREFIXED(sig_mgt_tra_up_dti_conn_open)
#define sig_mgt_tra_up_dti_disc _ENTITY_PREFIXED(sig_mgt_tra_up_dti_disc)
#endif

EXTERN void sig_mgt_tra_up_dti_conn_setup(void);
EXTERN void sig_mgt_tra_up_dti_conn_open(void);
EXTERN void sig_mgt_tra_up_dti_disc(void);

/*
 *  UP procedures
 */
#ifdef OPTION_MULTITHREAD
#define ul_init                   _ENTITY_PREFIXED(ul_init          )
#define snd_data_to_RA            _ENTITY_PREFIXED(snd_data_to_RA   )
#define snd_break_to_RA           _ENTITY_PREFIXED(snd_break_to_RA  )
#define up_start_dti_flow         _ENTITY_PREFIXED(up_start_dti_flow)
#endif

EXTERN void ul_init(T_TRA_UP *dul);
EXTERN void snd_data_to_RA();
EXTERN void snd_break_to_RA(USHORT break_len);
EXTERN void up_start_dti_flow(void);

EXTERN T_MODE l2r_data_mode;

/*
* number of signals (max. signalNum which occurs in pei_signal)
*/

EXTERN DTI_HANDLE l2r_hDTI; /* DTI connection handle for DTI library      */

EXTERN T_FD *tra_get_next_FrameDesc(void);

#endif