FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/gtt_include/ctm/viterbi.h @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Jul 2021 18:32:40 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* ******************************************************************************* * * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH * * The program(s) may be used and/or copied only with the * written permission from Ericsson or in accordance * with the terms and conditions stipulated in the agreement or * contract under which the program(s) have been supplied. * ******************************************************************************* * * File : viterbi.h * Purpose : Header file for viterbi.c * Author : Francisco Javier Gil Gomez * * Revision history * * $Log: $ * ******************************************************************************* */ #ifndef viterbi_h #define viterbi_h "$Id: $" #include <stdio.h> #include <math.h> #include "conv_poly.h" /* definition of viterbi_t */ /***********************************************************************/ /* viterbi_init() */ /* ************** */ /* Initialization of the Viterbi decoder. */ /* */ /* output variables: */ /* *viterbi_state initialized state variable of the decoder */ /* */ /***********************************************************************/ void viterbi_init(viterbi_t* viterbi_state); /***********************************************************************/ /* viterbi_reinit() */ /* **************** */ /* Re-Initialization of the Viterbi decoder. This function should be */ /* used for re-setting a Viterbi decoder that has already been */ /* initialized. In contrast to viterbi_init(), this reinit function */ /* does not calculate the values of all members of viterbi_state that */ /* do not change during the execution of the Viterbi algorithm. */ /* */ /* output variables: */ /* *viterbi_state initialized state variable of the decoder */ /* */ /***********************************************************************/ void viterbi_reinit(viterbi_t* viterbi_state); /***********************************************************************/ /* viterbi_exec() */ /* ************** */ /* Execution of the Viterbi decoder */ /* */ /* input variables: */ /* inputword Vector with gross bits */ /* length_input Number of valid gross bits in vector inputword.*/ /* length_input must be an integer multiple of */ /* CHC_RATE */ /* */ /* output variables: */ /* out Vector with the decoded net bits. The net bits */ /* are either 0 or 1. */ /* *num_valid_out_bits Number of valid bits in vector out */ /* */ /* input/output variables: */ /* *viterbi_state State variable of the decoder */ /* */ /***********************************************************************/ void viterbi_exec(WORD16* inputword, WORD16 length_input, WORD16* out, WORD16* num_valid_out_bits, viterbi_t* viterbi_state); #endif