FreeCalypso > hg > fc-tourmaline

view src/cs/drivers/drv_app/spi/spi_api.c @ 273:5caa86ee2cfa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 34b7059b9337
children
line wrap: on
line source

/*********************************************************************************
*
*	File Name: spi_api.c
*
*	Bridge functions used to send events to the SPI task
*
*	(C) Texas Instruments, all rights reserved
*
*	Version number: 0.1		Date: 25-September-2000
*
*	History: 0.1 - Created by Candice Bazanegue
*
*	Author:
*
*********************************************************************************/

#include "rvf/rvf_api.h"
#include "spi/spi_api.h"
#include "spi/spi_env.h"
#include "spi/spi_process.h"
#include "rvm/rvm_use_id_list.h"


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_read                                           */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_read(UINT16 page, UINT16 address, CALLBACK_FUNC_U16 CallBack)
{
   T_SPI_READ *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB read not possible. Reason: SPI task not started",51, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB read not possible. Reason: SPI Task not ready",49, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   rvf_send_trace("SPI_ABB_READ",12, NULL_PARAM,
                  RV_TRACE_LEVEL_WARNING, SPI_USE_ID);

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_READ),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB read not possible. Reason: Not enough memory",
                      59,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_READ_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = (CALLBACK_FUNC) CallBack;
   msgPtr->page = page;
   msgPtr->address = address;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id,
                 msgPtr);

   return (RV_OK);
}


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_write                                          */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_write(UINT16 page, UINT16 address, UINT16 data)
{
   T_SPI_WRITE *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB write not possible. Reason: SPI task not started",52, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB write not possible. Reason: SPI Task not ready",50, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_WRITE),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB write not possible. Reason: Not enough memory",
                      60,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_WRITE_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = NULL;
   msgPtr->page = page;
   msgPtr->address = address;
   msgPtr->data = data;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id, msgPtr);

   return (RV_OK);
}


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_conf_ADC                                       */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_conf_ADC(UINT16 channels, UINT16 itval)
{
   T_SPI_ABB_CONF_ADC *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB conf ADC not possible. Reason: SPI task not started",55, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB conf ADC not possible. Reason: SPI Task not ready",53, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   rvf_send_trace("SPI_ABB_CONF_ADC",16, NULL_PARAM,
                  RV_TRACE_LEVEL_WARNING, SPI_USE_ID);

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_ABB_CONF_ADC),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB conf ADC not possible. Reason: Not enough memory",
                      63,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_CONF_ADC_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = NULL;
   msgPtr->channels               = channels;
   msgPtr->itval                  = itval;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id, msgPtr);

   return (RV_OK);
}


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_read_ADC                                       */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_read_ADC(UINT16 *Buff, CALLBACK_FUNC_NO_PARAM CallBack)
{
   T_SPI_ABB_READ_ADC *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB read ADC not possible. Reason: SPI task not started",55, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB conf ADC not possible. Reason: SPI Task not ready",53, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   rvf_send_trace("SPI_ABB_READ_ADC",16, NULL_PARAM,
                  RV_TRACE_LEVEL_WARNING, SPI_USE_ID);

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_ABB_READ_ADC),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB read ADC not possible. Reason: Not enough memory",
                      63,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_READ_ADC_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = NULL;
   msgPtr->Buff                   = Buff;
   msgPtr->callback_func          = CallBack;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id, msgPtr);

   return (RV_OK);
}