/********************************************************************************/
/*                                                                              */
/*      File Name:   rtc_config.h                                               */
/*                                                                              */
/*      Purpose:   This file contains adresses for RTC register access.         */
/*                 and defined value                                            */
/*                                                                              */
/*      Note:      None.                                                        */
/*                                                                              */
/*      Revision History:                                                       */
/*      05/31/01   Laurent Sollier      Create.                                 */
/*                                                                              */
/*   (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved  */
/*                                                                              */
/********************************************************************************/

#ifndef _RTC_CONFIG_H_
#define _RTC_CONFIG_H_

#ifndef _WINDOWS
	#include "chipset.cfg"
#endif


#include "memif/mem.h" 
#include "rv/general.h"



/* FOR ULYSSE AND CALYPSO CHIP */
#define RTC_SECONDS_REG			(UINT8 *)(RTC_XIO_START)				/* Seconds register */
#define RTC_MINUTES_REG			((UINT8 *)(RTC_XIO_START) +  0x01)		/* Minutes register */
#define RTC_HOURS_REG			((UINT8 *)(RTC_XIO_START) +  0x02)		/* Hours register */
#define RTC_DAYS_REG				((UINT8 *)(RTC_XIO_START) +  0x03)		/* Days register */
#define RTC_MONTHS_REG			((UINT8 *)(RTC_XIO_START) +  0x04)		/* Months register */
#define RTC_YEARS_REG			((UINT8 *)(RTC_XIO_START) +  0x05)		/* Years register */
#define RTC_WEEK_REG				((UINT8 *)(RTC_XIO_START) +  0x06)		/* Week register */
#define RTC_ALARM_SECONDS_REG	((UINT8 *)(RTC_XIO_START) + 0x08) /* Alarms seconds register */
#define RTC_ALARM_MINUTES_REG	((UINT8 *)(RTC_XIO_START) + 0x09)	/* Alarms minutes register */
#define RTC_ALARM_HOURS_REG	((UINT8 *)(RTC_XIO_START) + 0x0A)	/* Alarms hours register */
#define RTC_ALARM_DAYS_REG		((UINT8 *)(RTC_XIO_START) + 0x0B)	/* Alarms days register */
#define RTC_ALARM_MONTHS_REG	((UINT8 *)(RTC_XIO_START) + 0x0C)	/* Alarms months register */
#define RTC_ALARM_YEARS_REG	((UINT8 *)(RTC_XIO_START) + 0x0D) /* Alarms years register */
#define RTC_CTRL_REG				((UINT8 *)(RTC_XIO_START) + 0x10) /* Control register */
#define RTC_STATUS_REG			((UINT8 *)(RTC_XIO_START) + 0x11) /* Status register */
#define RTC_INTERRUPTS_REG		((UINT8 *)(RTC_XIO_START) + 0x12) /* Interrupts register */
#define RTC_COMP_LSB_REG		((UINT8 *)(RTC_XIO_START) + 0x13) /* LSB compensation register */
#define RTC_COMP_MSB_REG		((UINT8 *)(RTC_XIO_START) + 0x14) /* MSB compensation register */

/* RTC Control register description */

#define RTC_START_RTC		0x0001	/* 1 => RTC is running */
#define RTC_ROUND_30S		0x0002	/* Time rounded to the closest minute */
#define RTC_AUTO_COMP		0x0004	/* Auto compensation enabled or not */
#define RTC_MODE_12_24		0x0008	/* 12 hours mode*/
#define RTC_TEST_MODE		0x0010	/* Test mode */
#define RTC_SET_32_COUNTER	0x0020 	/* set 32 KHz counter with comp_reg */
#if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11))
	#define RTC_nDELTA_OMEGA 0x0040  /* Analog Baseband Type */
#endif


/* RTC Interrupt register description */

#define RTC_EVERY		0x0003		/* Define period of periodic interrupt
												(second, minute, hour, day) */
#define RTC_IT_TIMER	0x0004		/* Enable periodic interrupt */
#define RTC_IT_ALARM	0x0008		/* Alarm interrupt enabled or not */	

/* RTC Status register description */

#define RTC_BUSY		0x0001
#define RTC_RUN		0x0002		/* RTC is running */
#define RTC_1S_EVENT	0x0004		/* One second has occured */
#define RTC_1M_EVENT 0x0008		/* One minute has occured */
#define RTC_1H_EVENT	0x0010		/* One hour has occured */
#define RTC_1D_EVENT	0x0020		/* One day has occrued */
#define RTC_ALARM		0x0040		/* Alarm interrupt has been generated */
#define RTC_POWER_UP	0x0080		/* Indicates that a reset occured */

#define RTC_EVERY_SEC	0x0000
#define RTC_EVERY_MIN  	0x0001
#define RTC_EVERY_HR		0x0002
#define RTC_EVERY_DAY	0x0003

/* 32 Khz and HF clock definition */
#define RTC_CLOCK_32K 32768.0

	/* HF clock definition */
#if ((CHIPSET == 3) || (CHIPSET == 5) || (CHIPSET == 6))
	#define RTC_CLOCK_HF 65000000.0
#elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8))
	#define RTC_CLOCK_HF 78000000.0
#elif ((CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
	#define RTC_CLOCK_HF 104000000.0
#endif



#endif /* #ifndef _RTC_CONFIG_H_ */