FreeCalypso > hg > fc-tourmaline

view src/cs/drivers/drv_app/lcc/lcc_handle_message.h @ 273:5caa86ee2cfa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR Message Processing
 *
 * $Id: pwr_handle_message.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_HANDLE_MESSAGE_H_
#define __LCC_HANDLE_MESSAGE_H_

#include "lcc/lcc.h"

/******************************************************************************
 * Function prototypes
 ******************************************************************************/

T_RVM_RETURN pwr_task_init(void);
T_RV_RET process_pwr_tm_read_request         (T_PWR_REQ *request);
T_RV_RET process_pwr_tm_write_request        (T_PWR_REQ *request);
T_RV_RET process_spi_adc_indication          (T_PWR_REQ *request);
void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID  dest_addr_id);
void pwr_modulate_on(void);
void pwr_modulate_off(void);
void start_q401_charge(void);
void stop_q401_charge(void);

void build_name(const char *ch_pre, char *cfg_id , UINT8 index, const char * ch_post,  char * name);
void cv_charging_house_keeping(void);
void end_charging_house_keeping(void);

#endif