view cdg-hybrid/cdginc/p_8010_134_mmpm_sap.val @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_134_mmpm_sap.val                                        |
| SOURCE  : "sap\8010_134_mmpm_sap.pdf"                                    |
| LastModified : "2003-07-29"                                              |
| IdAndVersion : "8010.134.02.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:27:04 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : MMPM
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_134_MMPM_SAP_VAL
#define P_8010_134_MMPM_SAP_VAL


#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_134_MMPM_SAP_VAL
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__LAST_MODIFIED _2003_07_29
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__ID_AND_VERSION _8010_134_02_007

#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_04_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_134_MMPM_SAP_VAL

#undef CDG_ENTER__FILENAME

#include "p_8010_137_nas_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_152_ps_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_153_cause_include.val"   /* Access values independent from the corresponding h-file. */


/*
 * Enum to value table VAL_establish_cause
 * CCDGEN:WriteEnum_Count==26
 */
#ifndef __T_MMPM_VAL_establish_cause__
#define __T_MMPM_VAL_establish_cause__
typedef enum
{
  MMPM_CAUSE_ESTABL_ORIG_CONVERSATIONAL = 0x1,    /* Originating conversational call */
  MMPM_CAUSE_ESTABL_ORIG_STREAMING = 0x2,         /* Originating streaming call     */
  MMPM_CAUSE_ESTABL_ORIG_INTERACTIVE = 0x3,       /* Originating interactive call   */
  MMPM_CAUSE_ESTABL_ORIG_BACKGROUND = 0x4,        /* Originating background call    */
  MMPM_CAUSE_ESTABL_ORIG_HIGH_PRIO_SIGNALLING = 0x5, /* Originating high priority signalling */
  MMPM_CAUSE_ESTABL_ORIG_LOW_PRIO_SIGNALLING = 0x6 /* Originating low priority signalling */
}T_MMPM_VAL_establish_cause;
#endif

/*
 * Enum to value table VAL_reg_state
 * CCDGEN:WriteEnum_Count==27
 */
#ifndef __T_MMPM_VAL_reg_state__
#define __T_MMPM_VAL_reg_state__
typedef enum
{
  MMPM_RS_DEREGISTERED           = 0x0,           /* GMM context for SMS is removed */
  MMPM_RS_REGISTERED             = 0x1            /* GMM context for SMS is built   */
}T_MMPM_VAL_reg_state;
#endif

/*
 * user defined constants
 */
#define MMPM_MAX_N_PDU_NUMBER_LIST     (0x10)     

#include "CDG_LEAVE.h"


#endif