view src/cs/drivers/drv_core/timer/timer.c @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
                                                                             
   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
   product  is  protected  under  copyright  law  and  trade  secret law as an 
   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
   rights reserved.                                                            
                  
                                                           
   Filename         : timer.c

   Description      : timer.c

   Project          : drivers

   Author           : pmonteil@tif.ti.com  Patrice Monteil.

   Version number   : 1.3

   Date and time    : 07/23/98 16:25:32
   Previous delta   : 07/23/98 16:25:32

   SCCS file        : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.c

   Sccs Id  (SID)       : '@(#) timer.c 1.3 07/23/98 16:25:32 '

 
*****************************************************************************/

#include "l1sw.cfg"

#if (OP_L1_STANDALONE == 0)
  #include "main/sys_types.h"
#else
  #include "sys_types.h"
#endif
#include "memif/mem.h"
#include "inth/iq.h"
#include "timer.h"


/*--------------------------------------------------------------
 *  TIMER_Read()
 *--------------------------------------------------------------
 * Parameters :	num of the register to be read
 * Return     :value of the timer register read
 * Functionality :  read one of the TIMER register
 *--------------------------------------------------------------*/
SYS_UWORD16 TIMER_Read (unsigned short regNum)
{
   volatile SYS_UWORD16 timerReg;

   switch (regNum) {
   case 0:
      timerReg = (( * (SYS_UWORD16 *) TIMER_CNTL_REG) & TIMER_CNTL_MASK);
      break;
   case 1:
      timerReg = ( * (SYS_UWORD16 *) TIMER_READ_REG);
      break;
   case 2:
      timerReg = (( * (SYS_UWORD16 *) TIMER_MODE_REG) & TIMER_MODE_MASK);
      break;
   default:
       break;
   }
   return(timerReg);
}
/*--------------------------------------------------------------
 *  TM_ResetTimer()
 *--------------------------------------------------------------
 * Parameters : timer number (1 or 2) 
 *              timer value, reload yes or not, scale
 * Return     : none
 * Functionality : Give the timewr state
 *--------------------------------------------------------------*/
void  TM_ResetTimer (SYS_UWORD16 timerNum,  SYS_UWORD16 countValue, 
                     SYS_UWORD16 autoReload, SYS_UWORD16 clockScale)
{
     volatile SYS_UWORD16 *cntl;
    
    if (timerNum == 1) 
    {
        cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL; 

        *cntl &= ~(START_STOP | PTV);        /* stop and reset values */

        (autoReload) ? (*cntl |= AR) : (*cntl &= ~AR);

        *cntl |= (clockScale << 2 );


        * (SYS_UWORD16 *) TIMER1_LOAD_TIM = countValue;  /*load the value */

        *cntl |= START_STOP;    
    }
    else 
    {
        cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL; 

        *cntl &= ~(START_STOP | PTV);        /* stop and reset values */

        (autoReload) ? (*cntl |= AR) : (*cntl &= ~AR);

        *cntl |= (clockScale << 2 );
         

        * (SYS_UWORD16 *) TIMER2_LOAD_TIM = countValue;  /*load the value */

        *cntl |= START_STOP;    
    }
}

/*
 *  TM_StopTimer
 *
 * Parameters : timer number (1 or 2)
 */
void   TM_StopTimer (int timerNum)
{

    volatile SYS_UWORD16 *cntl;
    
    if (timerNum == 1) 
    {
        cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL;
    }
    else
    {
        cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL;
    }
    *cntl &= ~START_STOP;

}   

/*
 * TM_ReadTimer
 *
 * Returns current timer value
 *
 * Parameters : timer number (1 or 2)
 *
 */
SYS_UWORD16 TM_ReadTimer (int timerNum)
{
    if (timerNum == 1) 
    {
        return (* (SYS_UWORD16 *) TIMER1_READ_TIM);
    }
    else
    {
        return (* (SYS_UWORD16 *) TIMER2_READ_TIM);
    }
}   


/*
 * TM_StartTimer
 *
 * Parameters : timer number (1 or 2)
 *
 */
void TM_StartTimer (int timerNum)
{
    volatile SYS_UWORD16 *cntl;
    
    if (timerNum == 1) 
    {
        cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL;
    }
    else
    {
        cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL;
    }
    *cntl |= START_STOP;
}   

void TM_DisableWatchdog (void)
{
   /* volatile variable needed due C to optimization */
   volatile SYS_UWORD16 *reg = (volatile SYS_UWORD16 *) TIMER_MODE_REG;

   *reg = 0xf5;                
   *reg = 0xa0;
}


 /*
 * TM_EnableWatchdog
 * 
 */
void TM_EnableWatchdog(void)
{
    * ((volatile SYS_UWORD16 *) TIMER_MODE_REG) = TIMER_WDOG;
}

/*
 * TM_ResetWatchdog
 * 
 * Parameter : Tick count 
 * Use a different value each time, otherwise watchdog bites 
 */
void TM_ResetWatchdog(SYS_UWORD16 count)
{
  * ((volatile SYS_UWORD16 *) TIMER_LOAD_REG) = count;
}

/*
* TM_EnableTimer (int TimerNum)
* 
* Parameter : TimerNum : timer to enable (timer1 or timer2)
*
*/
void TM_EnableTimer (int TimerNum)
{
     volatile SYS_UWORD16 *cntl;
    
    if (TimerNum == 1) 
    {
        cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL;
    }
    else
    {
        cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL;
    }
    *cntl |= TIMER_CLK_EN;

}

/*
* TM_DisableTimer (int TimerNum)
* 
* Parameter : TimerNum : timer to enable (timer1 or timer2)
*
*/
void TM_DisableTimer (int TimerNum)
{
     volatile SYS_UWORD16 *cntl;
    
    if (TimerNum == 1) 
    {
        cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL;
    }
    else
    {
        cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL;
    }
    *cntl &= ~TIMER_CLK_EN;
}

/*--------------------------------------------------------------
 *  TIMER_ReadValue()
 *--------------------------------------------------------------
 * Parameters : none
 * Return     :	none
 * Functionality :  Read timer value
 *--------------------------------------------------------------*/

unsigned short TIMER_ReadValue (void)
{
  return(* (SYS_UWORD16 *) TIMER_READ_REG);
 
}

/*--------------------------------------------------------------
 *  TIMER_WriteValue()
 *--------------------------------------------------------------
 * Parameters : none
 * Return     :	none
 * Functionality :  Write timer value
 *--------------------------------------------------------------*/

void TIMER_WriteValue (SYS_UWORD16 value)
{
  * (SYS_UWORD16 *) TIMER_LOAD_REG = value;	/*load the value */
 
}