view src/ui/mfw/mfw_tim.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 92abb46dc1ba
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: mfw_tim.h       $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 8               $|
| CREATED: 21.09.98                     $Modtime:: 2.03.00 11:50    $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : MFW_TIM

   PURPOSE : Timer types & constants

   EXPORT  :

   TO DO   :

   $History:: mfw_tim.h                                             $
 *
 * *****************  Version 8  *****************
 * User: Es           Date: 3.03.00    Time: 12:10
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * timStart(), timSignal() etc.: safer handling of simultaneous
 * timeouts; additional chain in timer control block.
 *
 * *****************  Version 7  *****************
 * User: Nm           Date: 18.02.00   Time: 12:34
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * change the name timSetup to
 * timSetTime
 *
 * *****************  Version 6  *****************
 * User: Nm           Date: 18.02.00   Time: 12:21
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * add timSetup()
 *
 * *****************  Version 5  *****************
 * User: Es           Date: 14.06.99   Time: 12:14
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 4  *****************
 * User: Es           Date: 17.02.99   Time: 19:11
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 3  *****************
 * User: Es           Date: 14.01.99   Time: 17:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 2  *****************
 * User: Es           Date: 23.12.98   Time: 16:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
*/

#ifndef _DEF_MFW_TIM_H_
#define _DEF_MFW_TIM_H_

typedef struct MfwTimTag                /* TIMER CONTROL BLOCK      */
{
    S32 time;                           /* timeout time             */
    S32 left;                           /* time left before timeout */
    MfwCb handler;                      /* event handler            */
    struct MfwTimTag *next;             /* next in active chain     */
    struct MfwTimTag *next2;            /* next in timeout chain    */
    // PATCH LE 06.06.00
    // add pointer to MFW header element
    MfwHdr * mfwHeader;                /* Associated header.  SPR#1597 - SH - Change mfw_header to mfwHeader */
    // END PATCH LE 06.06.00
} MfwTim;

                                        /* PROTOTYPES               */
MfwRes timInit (void);
MfwRes timExit (void);
MfwHnd timCreate (MfwHnd w, S32 t, MfwCb f);
MfwRes timDelete (MfwHnd h);
MfwRes timStart (MfwHnd tim);
MfwRes timStop (MfwHnd tim);
MfwRes timSetTime (MfwHnd tim, S32 t);
S32 timTime (MfwHnd h);
void timSignal (void);

/* Added to remove warning */
EXTERN UBYTE dspl_Enable (UBYTE   in_Enable);

#endif