FreeCalypso > hg > fc-tourmaline
view src/ui/mfw/mfw_band.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 67bfe9f274f6 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT: GSM-MFW $Workfile:: Mfw_band.c $| | $Author:: MC/SH $Revision:: 1 $| | STATE : code | +--------------------------------------------------------------------+ MODULE : MFW_BAND PURPOSE : AT%BAND functionality for MFW $History: Mfw_band.c $ */ #define ENTITY_MFW #include <string.h> #include <stdio.h> #include <stdlib.h> #include "typedefs.h" #include "vsi.h" #include "pei.h" #include "custom.h" #include "gsm.h" #include "prim.h" #ifndef PCM_2_FFS #include "pcm.h" #endif /* BEGIN ADD: Sumit : Req ID: : 31-Mar-2005*/ #ifndef NEPTUNE_BOARD /* END ADD: Sumit : Req ID: : 31-Mar-2005*/ #include "ffs/ffs.h" /* BEGIN ADD: Sumit : Req ID: : 31-Mar-2005*/ #else #include "ffs.h" #endif /* END ADD: Sumit : Req ID: : 31-Mar-2005*/ /* SPR#1470 - SH - these includes are now outside of * FAX_AND_DATA switch */ #include "message.h" #include "prim.h" #include "aci_cmh.h" #if defined (FAX_AND_DATA) /*#include "message.h" #include "prim.h" #include "aci_cmh.h" SPR#1470 - SH */ #include "aci_fd.h" #endif #ifdef GPRS #include "gprs.h" #endif #include "dti_conn_mng.h" #include "phb.h" #include "psa.h" #include "cmh.h" #include "cmh_phb.h" #include "psa.h" #include "psa_sim.h" #include "cus_aci.h" #include "cmh_mm.h" #include "cmh_sim.h" #include "Mfw_band.h" /* +--------------------------------------------------------------------+ | PROJECT: GSM-MFW (8417) MODULE: MFW_BAND | | STATE : code ROUTINE: band_radio_mode_switch| +--------------------------------------------------------------------+ PURPOSE : Set radio band and mode */ T_MFW_BAND_RET band_radio_mode_switch(T_MFW_BAND_MODE mode, UBYTE band) { T_ACI_RETURN ret; TRACE_FUNCTION("band_radio_mode_switch"); /*a0393213 compiler warnings removal - explicit typecasting done*/ ret = sAT_PercentBAND(CMD_SRC_LCL, (T_ACI_BAND_MODE)mode, band); /*radio mode set without errors*/ TRACE_EVENT_P1("Band: %d", band); TRACE_EVENT_P1("Return val: %d", ret); switch(ret) { case (AT_BUSY): return MFW_BAND_Busy; // break; // RAVI case (AT_FAIL): return MFW_BAND_Fail; // break; // RAVI case (AT_CMPL): return MFW_BAND_OK; // break; // RAVI case (AT_EXCT): return MFW_BAND_InProgress; // break; // RAVI default: return MFW_BAND_Fail; // break; // RAVI } } /* +--------------------------------------------------------------------+ | PROJECT: GSM-MFW (8417) MODULE: MFW_BAND | | STATE : code ROUTINE: band_get_radio_modes | +--------------------------------------------------------------------+ PURPOSE : Get list of possible bands */ T_MFW_BAND_RET band_get_radio_modes(T_MFW_BAND_MODE* maxMode, UBYTE *band) { T_ACI_RETURN ret; ret = tAT_PercentBAND(CMD_SRC_LCL, (T_ACI_BAND_MODE*)maxMode, (UBYTE*)band); if (ret == AT_CMPL) return MFW_BAND_OK; else return MFW_BAND_Fail; } /* +--------------------------------------------------------------------------+ | PROJECT: GSM-MFW (8417) MODULE: MFW_BAND | | STATE : code ROUTINE: band_get_current_radio_mode | +---------------------------------------------------------------------------+ PURPOSE : Get current band setting */ T_MFW_BAND_RET band_get_current_radio_mode(T_MFW_BAND_MODE* mode, UBYTE* band) { T_ACI_RETURN ret; ret = qAT_PercentBAND(CMD_SRC_LCL, (T_ACI_BAND_MODE*)mode, (UBYTE*)band); if (ret == AT_CMPL) return MFW_BAND_OK; else return MFW_BAND_Fail; }