view src/nucleus/gcc/asm_defs.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
 ************************************************************************
 *                                                                       
 *               Copyright Mentor Graphics Corporation 2002              
 *                         All Rights Reserved.                          
 *                                                                       
 * THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS  
 * THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS   
 * SUBJECT TO LICENSE TERMS.                                             
 *                                                                       
 ************************************************************************
 ************************************************************************
 *                                                                       
 * FILE NAME                            VERSION                          
 *                                                                       
 *      asm_defs.inc            Nucleus PLUS\ARM925\Code Composer 1.14.1 
 *                                                                       
 * COMPONENT                                                             
 *                                                                       
 *      IN - Initialization                                              
 *                                                                       
 * DESCRIPTION                                                           
 *                                                                       
 *      This file contains the target processor dependent initialization 
 *      values used in int.s, tct.s, and tmt.s                      
 *                                                                       
 * HISTORY                                                               
 *                                                                       
 *         NAME            DATE                    REMARKS               
 *                                                                       
 *      B. Ronquillo     08-28-2002          Released version 1.13.1      
 *                                                                       
 ************************************************************************
 */

/*
 **********************************
 * BOARD INITIALIZATION CONSTANTS *
 **********************************
 * Begin define constants used in low-level initialization.
 */

/* CPSR control byte definitions */
#define	LOCKOUT			0xC0	/* Interrupt lockout value */
#define	LOCK_MSK		0xC0	/* Interrupt lockout mask value */
#define	MODE_MASK		0x1F	/* Processor Mode Mask */
#define	SUP_MODE		0x13	/* Supervisor Mode (SVC) */
#define	IRQ_MODE		0x12	/* Interrupt Mode (IRQ) */
#define	IRQ_MODE_OR_LOCKOUT	0xD2	/* Combined IRQ_MODE OR'ed with */
					/* LOCKOUT */
#define	FIQ_MODE		0x11	/* Fast Interrupt Mode (FIQ) */
#define	IRQ_BIT			0x80	/* Interrupt bit of CPSR and SPSR */
#define	FIQ_BIT			0x40	/* Interrupt bit of CPSR and SPSR */
#define	IRQ_BIT_OR_FIQ_BIT	0xC0	/* IRQ or FIQ interrupt bit of CPSR */
					/* and SPSR */
#define	ABORT_MODE		0x17
#define	UNDEF_MODE		0x1B

/*
 ********************************************
 *  TC_TCB and TC_HCB STRUCT OFFSET DEFINES *
 ********************************************
 */
#define	TC_CREATED		0x00	/* Node for linking to created task */
					/* list */
#define	TC_ID			0x0C	/* Internal TCB ID */
#define	TC_NAME			0x10	/* Task name */
#define	TC_STATUS		0x18	/* Task status */
#define	TC_DELAYED_SUSPEND	0x19	/* Delayed task suspension */
#define	TC_PRIORITY		0x1A	/* Task priority */
#define	TC_PREEMPTION		0x1B	/* Task preemption enable */
#define	TC_SCHEDULED		0x1C	/* Task scheduled count */
#define	TC_CUR_TIME_SLICE	0x20	/* Current time slice */
#define	TC_STACK_START		0x24	/* Stack starting address */
#define	TC_STACK_END		0x28	/* Stack ending address */
#define	TC_STACK_POINTER	0x2C	/* Task stack pointer */
#define	TC_STACK_SIZE		0x30	/* Task stack's size */
#define	TC_STACK_MINIMUM	0x34	/* Minimum stack size */
#define	TC_CURRENT_PROTECT	0x38	/* Current protection */
#define	TC_SAVED_STACK_PTR	0x3C	/* Previous stack pointer */
#define	TC_ACTIVE_NEXT		0x3C	/* Next activated HISR */
#define	TC_TIME_SLICE		0x40	/* Task time slice value */
#define	TC_ACTIVATION_COUNT	0x40	/* Activation counter */
#define	TC_HISR_ENTRY		0x44	/* HISR entry function */
#define	TC_HISR_SU_MODE		0x58	/* Sup/User mode indicator for HISRs */
#define	TC_HISR_MODULE		0x5C	/* Module identifier for HISR's */
#define	TC_SU_MODE		0xA8	/* Sup/User mode indicator for Tasks */
#define	TC_MODULE		0xAC	/* Module identifier for Tasks */